D-Link DXS-3400-24SC 24-Port Lite Layer 3 Stackable 10GbE Managed Switch User Manual

1. 서론

This manual provides comprehensive instructions for the installation, configuration, and operation of the D-Link DXS-3400-24SC 24-Port Lite Layer 3 Stackable 10GbE Managed Switch. The DXS-3400 Series offers compact, high-performance switching with wire-speed 10-Gigabit Ethernet capabilities, routing, and ultra-low latency. Its 1U height and high port density make it suitable for demanding enterprise and campus network environments. The DXS-3400-24SC specifically features twenty (20) 10GbE optical (SFP+) ports and four (4) 10GbE "Combo" ports (RJ45/SFP+).

2. 제품 특징

24-Port Lite Layer 3 Stackable 10GbE Managed Switch.
Twenty (20) 10GbE optical (SFP+) ports.
Four (4) 10GbE "Combo" ports (RJ45/SFP+).
Wire-speed 10-Gigabit Ethernet switching and routing.
Ultra-low latency performance.
Compact 1U rack-mountable design.

3. 패키지 내용

패키지에 다음 품목이 포함되어 있는지 확인하십시오.

D-Link DXS-3400-24SC 24-Port Lite Layer 3 Stackable 10GbE Managed Switch
전원 코드
랙 장착 키트
콘솔 케이블(RJ-45 - DB-9)
설명서 CD 또는 빠른 설치 가이드

If any items are missing or damaged, please contact your local D-Link reseller for assistance.

4. 물리적 설명

This section details the physical components and interfaces of the DXS-3400-24SC switch.

D-Link DXS-3400-24SC 10GbE Managed Switch, angled front view

그림 4.1: 각진 앞면 view of the D-Link DXS-3400-24SC switch. This image shows the overall compact 1U design, with the D-Link logo prominently displayed on the top cover. The front panel features a series of SFP+ ports and combo RJ45/SFP+ ports, along with status indicator LEDs.

Front panel of the D-Link DXS-3400-24SC 10GbE Managed Switch

그림 4.2: 전면 패널 상세도 view of the D-Link DXS-3400-24SC switch. From left to right, the front panel includes system status LEDs (Power, Alarm, Link/Act), a console port (RJ-45), a USB port, and then the twenty (20) SFP+ ports followed by four (4) combo RJ45/SFP+ ports. Each port has its own link/activity LED.

Rear panel of the D-Link DXS-3400-24SC 10GbE Managed Switch

그림 4.3: 후면 패널 view of the D-Link DXS-3400-24SC switch. This view highlights the modular power supply bays, typically supporting redundant power supplies for enhanced reliability. Multiple cooling fan modules are also visible, designed for efficient heat dissipation. The grounding screw is located on the left side.

5. 설정

5.1 랙 마운팅

Attach the provided mounting brackets to the sides of the switch using the screws included in the rack mounting kit.
Align the switch with an available U-space in your standard 19-inch equipment rack.
Secure the switch to the rack using appropriate rack screws. Ensure the switch is level and firmly seated.

5.2 전원 연결

Connect one end of the AC power cord to the power inlet on the rear of the switch.
교류 전원 코드의 다른 쪽 끝을 접지된 콘센트에 연결하십시오.
Ensure the power switch (if present) is in the ON position. The power LED on the front panel should illuminate.

5.3 초기 구성 액세스

The switch can be configured via a console port or through its default IP address via a network connection.

콘솔 포트 연결:

Connect the provided console cable (RJ-45 to DB-9) from the switch's console port to a serial port on your computer.
컴퓨터에서 터미널 에뮬레이션 프로그램(예: PuTTY, Tera Term)을 엽니다.
Configure the serial port settings: Baud Rate: 115200, Data Bits: 8, Parity: None, Stop Bits: 1, Flow Control: None.
Press Enter to access the command-line interface (CLI).

Web기반 관리:

Refer to the D-Link documentation for the default IP address and login credentials to access the web기반 관리 인터페이스.

6. 사용 설명서

Once the switch is powered on and initially configured, it will begin forwarding traffic according to its default settings or your custom configurations.

6.1 포트 연결

Connect 10GbE SFP+ transceivers into the SFP+ ports for fiber optic connections.
For the combo ports, use either an SFP+ transceiver or an RJ45 Ethernet cable for 10GBASE-T connections. Note that only one interface (SFP+ or RJ45) can be active per combo port at a time.
Observe the Link/Activity LEDs on the front panel. A solid green LED indicates a successful link, and a blinking LED indicates data activity.

6.2 관리 인터페이스

스위치는 해당 기능을 통해 관리할 수 있습니다. web-based GUI, CLI (Command Line Interface) through the console port or Telnet/SSH, and SNMP (Simple Network Management Protocol).

Web 그래픽 사용자 인터페이스: 다음을 통해 액세스 web browser using the switch's IP address. Provides a graphical interface for configuration and monitoring.
CLI: Offers granular control and advanced configuration options. Accessible via console or SSH/Telnet.
SNMP: 중앙 집중식 모니터링을 위해 네트워크 관리 시스템과의 통합을 지원합니다.

Refer to the D-Link DXS-3400 Series User Manual (available on the D-Link support website) for detailed instructions on advanced configuration topics such as VLANs, QoS, routing protocols, and stacking.

7. 유지관리

7.1 청소

Ensure the switch is powered off and disconnected from all power sources before cleaning.
부드럽고 마른 천으로 스위치 외부를 닦으세요.
For dust accumulation in ventilation openings, use compressed air. Do not use liquid cleaners or aerosol sprays.

7.2 펌웨어 업데이트

Regularly check the D-Link support web최신 펌웨어 업데이트 사이트입니다. 펌웨어 업데이트는 새로운 기능, 성능 향상 및 보안 패치를 제공할 수 있습니다.

최신 펌웨어를 다운로드하세요 file from the official D-Link support web대지.
스위치에 액세스하세요 web-based management interface or CLI.
Follow the instructions in the firmware upgrade section of the switch's user manual to perform the update. 경고: Do not power off the switch during a firmware upgrade.

8. 문제 해결

This section provides solutions to common issues you may encounter with the DXS-3400-24SC switch.

문제	가능한 원인	해결책
스위치의 전원이 켜지지 않습니다.	전원이 안 들어옴, 전원 코드 불량, 전원 공급 장치 문제.	전원 코드가 스위치와 작동하는 콘센트에 모두 단단히 연결되어 있는지 확인하세요. 전원 콘센트가 작동하는지 확인하세요. Check the power switch on the rear of the unit. If using redundant power supplies, check both units.
연결된 포트에 링크 표시등이 켜지지 않습니다.	Incorrect cable, faulty transceiver, port disabled, incompatible speed/duplex.	Verify the cable (fiber or RJ45) is correctly connected and not damaged. Ensure the SFP+ transceiver is properly seated and compatible. Check the configuration of the port on both the switch and the connected device (speed, duplex, enabled status). 다른 포트나 케이블을 사용해 보세요.
접근할 수 없습니다 web 관리 인터페이스.	Incorrect IP address, network connectivity issue, firewall, browser issue.	Ensure your computer is on the same IP subnet as the switch. Verify the switch's IP address. 네트워크 케이블 연결을 확인하세요. 컴퓨터의 방화벽을 일시적으로 비활성화하십시오. 다른 것을 시도해보세요 web 브라우저. Attempt to access via console port CLI.

For further assistance, consult the full D-Link DXS-3400 Series User Manual or contact D-Link Technical Support.

9. 사양

특징	세부 사항
모델 번호	DXS-3400-24SC
상표	디링크
포트	20 x 10GbE SFP+ ports, 4 x 10GbE Combo (RJ45/SFP+) ports
스위치 유형	Lite Layer 3 Stackable Managed Switch
데이터 전송 속도	12 Gigabits Per Second (per port, aggregate switching capacity will be higher)
인터페이스 유형	RJ45, SFP+
품목 무게	14.66파운드(6.65kg)
제품 크기(LxWxH)	17.32 x 17.32 x 1.5인치(44 x 44 x 3.8cm)
권tage	240V (AC input range typically wider)
케이스 소재	Plastic (likely metal chassis with plastic components)
작동 온도	최대 섭씨 50도
제조업체	D-Link Systems
한국어:	790069423604
첫 번째 가능한 날짜	20년 2014월 XNUMX일

10. 안전 정보

제안 65 경고: 이 제품에는 캘리포니아주에서 암, 선천적 기형 또는 기타 생식 기능 장애를 유발하는 것으로 알려진 화학 물질이 포함되어 있을 수 있습니다. 자세한 내용은 다음 웹사이트를 방문하세요. www.P65Warnings.ca.gov.

화재, 감전, 부상의 위험을 줄이기 위해 이 제품을 사용할 때는 항상 기본적인 안전 예방 조치를 따르세요.

장치를 물이나 습기에 노출시키지 마십시오.
Do not open the device or attempt to repair it yourself.
과열을 방지하려면 적절한 환기를 유지하세요.
Use only the power adapter provided with the device or a D-Link approved replacement.

11. 보증 및 지원

For warranty information, technical support, and product registration, please visit the official D-Link website or contact your local D-Link support representative. Keep your purchase receipt as proof of purchase.

D-링크 지원 Web대지: www.dlink.com/support