크리너 크리스마스 트리 지니 M 사용 설명서

1. 제품 오버view

The Krinner Christmas Tree Genie M is an innovative tree stand designed for quick, easy, and secure setup of live Christmas trees. Its unique single-cable operation ensures even pressure around the tree trunk, providing exceptional stability. The integrated water reservoir and level indicator help keep your tree fresh throughout the holiday season.

• Easy one-person setup.
• Suitable for trees up to 7 ft tall with trunk diameters up to 5 inches.
• Water reservoir holds up to 1.2 gallons (4.5 liters) of water.
• Water level indicator for convenient refilling.
• Foot pedal 'DINGS' when the tree is securely positioned.

Figure 1: Krinner Christmas Tree Genie M

Figure 2: Key features of the Tree Genie M, including tree height capacity and water reservoir size.

2. 설정 지침

Follow these steps to set up your Christmas tree securely in the Krinner Tree Genie M stand:

1. 나무를 준비하세요: Ensure the tree trunk is cut straight and clean at the bottom. Remove any lower branches that might interfere with the stand's clamping mechanism. The trunk diameter should not exceed 5 inches.
2. 스탠드 위치: Place the Krinner Tree Genie M stand in your desired location, ensuring it is on a flat, stable surface.
3. Insert the Tree: Carefully lift the tree and insert its trunk into the center of the stand. Guide the trunk onto the metal spike at the bottom of the reservoir. Ensure the tree is as upright as possible.
4. 나무를 안전하게 고정하세요: While holding the tree upright, repeatedly press the foot pedal down with your foot. The internal claws will tighten around the tree trunk via the single-cable system. Continue pressing until you hear an audible "DING" sound, indicating the tree is securely clamp편집.

Figure 3: Pressing the foot pedal to secure the tree.
5. Lock the Pedal: Once the tree is secure, slide the red safety lock button on the foot pedal to the "locked" position to prevent accidental release.
6. 물 추가: Fill the water reservoir with fresh water. The water level indicator will rise as you fill it, showing the maximum water level. The reservoir holds up to 1.2 gallons (4.5 liters).


Figure 4: Water reservoir with visible water level indicator.

3. 사용 설명서

Using your Krinner Christmas Tree Genie M is straightforward:

• 살수: Regularly check the water level indicator. When it drops, refill the reservoir with fresh water to ensure your tree remains hydrated and fresh.
• 안정성 확인: Periodically check the tree's stability. If it feels loose, ensure the foot pedal is locked. If necessary, unlock the pedal, press it a few more times until it "DINGS" again, and then re-lock it.
• Relocating the Tree: If you need to move the tree, ensure the foot pedal is locked before attempting to move the stand and tree together. For significant moves, it is recommended to release the tree, move the stand, and then re-secure the tree.

4. 유지관리

Proper maintenance will extend the life of your Krinner Tree Genie M:

• 청소: After the holiday season, empty any remaining water from the reservoir. Clean the stand with mild soap and water. Rinse thoroughly and allow it to air dry completely before storage.
• 저장: Store the tree stand in a cool, dry place away from direct sunlight. Ensure the clamping mechanism is clean and free of debris.
• 점검: Before each use, inspect the single-cable system and the clamping claws for any signs of wear or damage. Do not use the stand if any components appear damaged.

5. 문제 해결

일반적인 문제 및 해결 방법:

6. 사양

7. 보증 및 지원

For detailed warranty information and customer support, please refer to the official Krinner web사이트나 제품에 포함된 설명서를 참조하세요.

• 사용자 매뉴얼(PDF): 여기에서 다운로드하세요
• 사용자 가이드(PDF): 여기에서 다운로드하세요
• Visit the Krinner Store: Krinner Official Store