1. 서론
The Altronix Tempo2 Digital Timer is a versatile two-stage timer designed for various applications requiring precise timing control. It operates on either 12 or 24 volt AC or DC power and features a Single Pole Double Throw (SPDT) contact rated for 2 amps at 115VAC or 28VDC. Key functionalities include an adjustable timing range from 1 second to 60 seconds for timed door release, daily/weekly test modes, one-shot activation, and a door prop alarm. The unit incorporates EEProm memory for settings retention and an LCD display for clear status indication.
This manual provides detailed instructions for the proper installation, operation, and maintenance of your Tempo2 Digital Timer to ensure optimal performance and longevity.
Image showing the Altronix Tempo2 Digital Timer unit, typically featuring its LCD display and control buttons.
2. 특징
- 유니버설 2-Stage Timer: Provides flexible timing control for various applications.
- 유연한 전원 입력: Operates on 12V or 24V AC or DC.
- SPDT Contact: 2에서 평가 Amp / 115VAC / 28VDC.
- Adjustable Timing Range: 1 second to 60 seconds for timed door release.
- 작동 모드 : Includes daily/weekly test mode and one-shot activation.
- Door Prop Alarm: Integrated alarm function for security applications.
- EEProm Memory: Retains programmed settings during power loss.
- LCD 디스플레이: Provides clear visual feedback for programming and status.
3. 설정 및 설치
Proper installation is crucial for the reliable operation of the Tempo2 Digital Timer. Ensure all power is disconnected before beginning installation.
3.1 장착
Mount the timer in a secure, dry location, away from direct heat sources or excessive moisture. Use appropriate fasteners for the mounting surface.
3.2 배선 연결
Refer to the wiring diagram provided with your unit for specific connection points. General wiring guidelines are as follows:
- 전원 입력: Connect 12V or 24V AC/DC power to the designated terminals. Observe correct polarity for DC connections.
- 트리거 입력: Connect the trigger source (e.g., door contact, push button) to the trigger input terminals.
- 릴레이 출력: Connect the device to be controlled (e.g., door strike, alarm panel) to the SPDT relay output terminals (Common, Normally Open, Normally Closed). Ensure the load does not exceed the 2 Amp / 115VAC / 28VDC rating.
주의: Incorrect wiring can damage the unit or connected equipment. If you are unsure about any wiring procedures, consult a qualified electrician or technician.
4. 사용 설명서
The Tempo2 Digital Timer features an LCD display and control buttons for programming and operation.
4.1 Setting the Timer Duration
- Access the programming menu using the designated button (refer to the unit's specific button layout).
- Navigate to the 'Timing Duration' setting.
- Adjust the time from 1 second to 60 seconds using the up/down buttons.
- Save the setting and exit the programming menu.
4.2 Daily/Weekly Test Mode
This mode allows for scheduled testing of the timer's functionality without full activation. Consult the unit's programming guide for setting specific test schedules.
4.3 One-Shot Activation
The one-shot activation feature allows the timer to trigger once for the set duration upon receiving a signal. This is useful for single-event operations.
4.4 도어 프롭 알람
When configured, the door prop alarm will activate if a connected door remains open beyond a pre-set time. This feature enhances security by alerting users to prolonged open door conditions.
5. 유지관리
The Altronix Tempo2 Digital Timer is designed for reliable, long-term operation with minimal maintenance. Follow these guidelines to ensure continued performance:
- 청소: Periodically wipe the unit with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
- 사이: 매년 모든 배선 연결부를 검사하여 안전하고 부식되지 않았는지 확인하세요.
- 환경: 작동 환경이 지정된 온도 및 습도 범위 내에 유지되도록 하세요.
본체 내부에는 사용자가 수리할 수 있는 부품이 없습니다. 모든 수리는 자격을 갖춘 전문가에게 맡기십시오.
6. 문제 해결
If you encounter issues with your Tempo2 Digital Timer, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Timer not powering on / LCD blank | 전원이 들어오지 않고 볼륨이 틀립니다tage, or reversed DC polarity. | 전원 공급 장치 연결 및 볼륨을 확인하세요tage. Ensure correct DC polarity. |
| Timer not activating output | Incorrect trigger input, faulty wiring, or incorrect programming. | Verify trigger input signal. Check output wiring. Review 프로그래밍 설정. |
| 타이밍 지속 시간이 잘못되었습니다 | Timer duration set incorrectly. | Re-enter the programming menu and adjust the timing duration as needed. |
| Door prop alarm not functioning | Door contact faulty, wiring issue, or alarm not enabled. | Check door contact and its wiring. Ensure door prop alarm is enabled in settings. |
If the problem persists after attempting these solutions, contact Altronix technical support for further assistance.
7. 사양
- 모델: TEMPO2
- 상표: 알트로닉스
- 전원 입력: 12V 또는 24V AC/DC
- 연락처 유형: SPDT(단극 쌍투)
- 연락처 평가: 2 Amp @ 115VAC / 28VDC
- 타이밍 범위: 1 second to 60 seconds (adjustable)
- 메모리: EEProm (retains settings)
- 표시하다: 액정표시장치
- 특징: 두-stage operation, daily/weekly test mode, one-shot activation, door prop alarm
- 품목 무게: 약 0.2파운드(0.09kg)
- 한국어: 782239938292
- GTIN: 782239938292
8. 보증 및 지원
Altronix products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty information included with your product packaging or visit the official Altronix web대지.
For technical support, troubleshooting assistance, or to inquire about service, please contact Altronix customer support. Have your model number (TEMPO2) and any relevant purchase information ready when contacting support.
Altronix Contact Information:
Please refer to the official Altronix web최신 연락처 정보(전화번호 및 기술 지원 이메일 주소 포함)는 해당 사이트에서 확인하세요.