소개
This manual provides essential instructions for the safe and efficient use of your Mega Motion Vance NM7001 Power Recliner Chair. Please read all instructions carefully before assembly and operation. Retain this manual for future reference.
The Mega Motion Vance NM7001 is a heavy-duty, three-position power lift and recline chair designed to assist individuals weighing up to 500 lbs with sitting down and standing up. It features an electric motor for smooth transitions, a split back design, and a chaise seat for comfort.
안전 정보
경고: To reduce the risk of injury, ensure all safety precautions are followed.
- 의자는 반드시 제공된 설명서에 따라 조립하십시오.
- 최대 중량 용량은 500파운드(227kg)를 초과하지 마십시오.
- Keep the area around the chair clear of obstacles to prevent tripping hazards.
- 전원 코드가 끼이거나 손상되지 않았는지 확인하세요.
- 움직이는 부품에 어린이와 반려동물이 접근하지 못하도록 하십시오.
- 발판을 펼친 상태에서는 누구도 앉지 않도록 하세요.
설정 및 조립
Your Mega Motion Vance NM7001 Power Recliner Chair requires some assembly. It is recommended that two people assemble the chair due to its weight and size.
- 짐 풀기: Carefully remove all components from the shipping carton. Inspect for any damage. Report any damage to your dealer immediately.
- 기본 배치: Position the chair base in your desired location, ensuring sufficient clearance from walls and other furniture for reclining and lifting functions.
- 등받이 부착: Slide the backrest onto the base until it locks securely into place. You may hear an audible click.
- 전기 연결: Connect the power transformer to the chair's motor and then plug the transformer into a standard wall outlet. Ensure all connections are secure.
- Handwand Connection: Connect the handwand cable to the appropriate port on the chair.
Image: Dimensions of the Mega Motion Vance NM7001 Power Recliner Chair. This diagram illustrates the overall height, width, and depth, which are crucial for planning placement during setup.
Image: The Mega Motion Vance NM7001 Power Recliner Chair in a lifted position, showcasing its ability to assist users in standing.
작동 지침
The Vance NM7001 chair features an ergonomic push-button control handwand for easy operation of its three positions: upright, reclined, and lifted.
Using the Handwand
- 기대다: Press and hold the "Recline" button on the handwand. The chair will smoothly transition from an upright position to a partial or full recline. Release the button at your desired recline angle.
- 들어올리기/서기: Press and hold the "Lift" button on the handwand. The chair will gently rise and tilt forward, assisting you to a standing position. Release the button when you are comfortably standing.
- 똑바로 세우려면: From a reclined position, press and hold the "Lift" button. From a lifted position, press and hold the "Recline" button.
- USB 충전 포트 : A USB port is integrated into the handwand for convenient charging of small electronic devices.
Image: The Mega Motion Vance NM7001 Power Recliner Chair in an upright, seated position.
Image: The Mega Motion Vance NM7001 Power Recliner Chair in a fully reclined position, demonstrating its comfort features.
Image: The Mega Motion Vance NM7001 Power Recliner Chair in a lifted position, assisting a user to stand.
유지 보수 및 관리
Proper maintenance ensures the longevity and optimal performance of your recliner chair.
- 청소: The polyester fabric upholstery should be spot washed only. Use a mild detergent and a damp cloth to clean spills or stains. Do not saturate the fabric.
- 점검: Periodically check all electrical connections and cables for wear or damage. Ensure the chair's mechanism operates smoothly and quietly.
- 정리: Regularly ensure that the area around the chair is free from obstructions that could interfere with its movement or pose a safety hazard.
문제 해결
If you encounter issues with your chair, refer to the following common troubleshooting steps:
- 의장이 응답하지 않음:
- Check if the power cord is securely plugged into the wall outlet and the chair's transformer.
- Ensure the handwand cable is firmly connected to the chair.
- 다른 장치를 연결해 벽면 콘센트가 작동하는지 확인하세요.
- 정전:
The chair is equipped with an integrated battery emergency backup system. In the event of a power outage, this system allows you to safely lower the chair to a seated position. The backup batteries are typically located near the motor and should be replaced periodically to ensure functionality.
- 특이한 소음:
If the chair makes unusual noises during operation, discontinue use and contact customer support. Do not attempt to lubricate or repair the mechanism yourself.
명세서
| 모델 번호 | NM7001 (MM-AS-7001-Bordeaux) |
| 상표 | Mega Motion |
| 최대 중량 용량 | 500파운드(227kg) |
| 리클라이닝 포지션 | 3 (Upright, Partial Recline, Full Recline) |
| 전체 높이 | 43.5인치(110.5cm) |
| 전체 폭 | 39.5인치(100.3cm) |
| 전체 깊이 | 44인치(111.8cm) |
| 바닥으로부터의 좌석 높이 | 20인치(50.8cm) |
| 좌석 깊이 | 20.5인치(52.1cm) |
| 팔 사이의 너비 | 27인치(68.6cm) |
| 의자 무게 | 143파운드(64.9kg) |
| 실내장식 소재 | Polyester Knit Fabric (Textile) |
| 프레임 소재 | Furniture Grade Hardwood/Plywood, Heavy Duty Steel |
| 특징 | Dual Motor Lift, USB Port in Handwand, Integrated Battery Emergency Backup, Side Pockets |
Image: Detailed list of AS-7001 features and benefits, including specifications.
이미지: 이상view of the NM-7001 product features and specifications.
보증 정보
Your Mega Motion Vance NM7001 Power Recliner Chair comes with a comprehensive warranty:
- 1년 방문 서비스: Covers parts and labor for repairs performed in your home for one year from the date of purchase.
- Lifetime Warranty on Steel Frame: The heavy-duty steel frame is warranted for the lifetime of the original purchaser.
This warranty covers manufacturing defects and workmanship. It does not cover damage resulting from misuse, abuse, accidents, or unauthorized modifications. Please retain your proof of purchase for warranty claims.
고객 지원
For technical assistance, warranty claims, or replacement parts, please contact Mega Motion customer support. Refer to your purchase documentation or the Mega Motion official web최신 연락처 정보는 사이트에서 확인하세요.
When contacting support, please have your model number (NM7001) and proof of purchase readily available.