Mega Motion Vance Ultimate Power Recliner Chair NM7001 Instruction Manual

소개

This manual provides comprehensive instructions for the assembly, safe operation, and proper maintenance of your Mega Motion Vance Ultimate Power Recliner Chair, model NM7001. Please read this manual thoroughly before using the chair to ensure safe and efficient operation.

중요한 안전 정보

WARNING: To reduce the risk of injury, read all instructions before using the chair.

• Always use the lift and recline mechanism with caution. Ensure the area around the chair is clear before operating.
• Do not exceed the maximum weight limit of 500 pounds (227 kg) to ensure stability and safety.
• 어린이와 반려동물이 의자의 움직이는 부분에 가까이 가지 않도록 하십시오.
• Ensure all electrical cords are properly routed and not pinched or damaged.
• 발판을 펼친 상태에서는 누구도 앉지 않도록 하세요.
• Disconnect power before cleaning or servicing the chair.
• 이 의자는 실내용으로만 설계되었습니다.

Proposition 65 Warning: This product can expose you to chemicals including wood dust, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

조립 설명서

Your Mega Motion Vance Ultimate Power Recliner Chair requires minimal assembly. It is recommended that two people assemble the chair due to the weight of some components.

개봉 및 준비

1. Carefully open the shipping carton. Retain all packaging materials until assembly is complete and you are satisfied with the product.
2. Remove all components from the carton. Inspect for any damage.
3. Place the base of the chair in the desired location, ensuring there is enough space for reclining and lifting functions.

Figure 1: The Mega Motion Vance Power Recliner Chair as received in its shipping carton. Note the 'Handle with Care' and 'Up' indicators.

Attaching the Chair Back

4. Align the metal receivers on the chair back with the posts on the chair base.
5. Slide the chair back down onto the posts until it is securely seated. You may hear a click.
6. Locate and connect any electrical cables between the chair back and the base. Ensure connections are firm.
7. Connect the power transformer to the chair's power input and then plug the transformer into a grounded electrical outlet.

작동 지침

The Mega Motion Vance Ultimate Power Recliner Chair features a simple two-button handwand for controlling the lift and recline functions.

Handwand Control

The handwand is typically located in a side pocket or attached to the chair arm. It features two buttons:

• 위쪽 버튼 : Press and hold to raise the chair to a standing position or to bring it to an upright seated position from a reclined state.
• 아래로 버튼 : Press and hold to recline the chair or to lower it from a lifted position to a seated position.

The handwand also includes a USB port for charging small electronic devices.

Chair Positions

This chair offers three primary positions:

1. Upright/Seated Position: The standard sitting position.
2. Partial Recline Position: A comfortable position for reading or watching television.
3. 완전히 눕힌 자세: A fully extended position for resting or sleeping.

Figure 2: Chair in upright seated position.

Figure 3: Chair in lifted position, assisting with standing.

Figure 4: Chair in fully reclined position.

비상 배터리 백업

정전이 발생한 경우tage, the chair is equipped with an integrated emergency battery backup system. This allows for a limited number of operations to return the chair to a safe, seated position. Ensure batteries are installed and checked periodically.

관리 및 유지 보수

Regular care will extend the life and appearance of your recliner chair.

• 직물 세척: For general cleaning, use a soft cloth and mild soap solution. Test on an inconspicuous area first. Do not saturate the fabric.
• 전원 코드: 전원 코드에 손상 흔적이 있는지 주기적으로 점검하십시오. 손상된 경우 사용을 중단하고 고객 지원 센터에 문의하십시오.
• 움직이는 부품: The chair's mechanisms are designed to be maintenance-free. Do not attempt to lubricate or disassemble moving parts.
• 놓기: Avoid placing the chair in direct sunlight or near heat sources, as this can cause fabric fading or damage.

문제 해결

If you experience issues with your Mega Motion Vance Ultimate Power Recliner Chair, refer to the following common solutions:

If these steps do not resolve the issue, please contact Mega Motion customer support for further assistance.

제품 사양

Figure 5: Key features and dimensional specifications of the Mega Motion Vance Power Recliner Chair.

• 모델: NM7001 (also referred to as AS-7001 in some documentation)
• 중량 용량: 500파운드(227kg)
• 위치: 3-position, all-electric lift and recline
• 건설: Heavy-duty, furniture-grade hardwood/plywood frame
• 구조: Heavy-duty polyester knit fabric (Cafe Finish/Walnut)
• 기구: Counter-balanced recliner mechanism for smooth, quiet operation
• 특징: Split back design, chaise seat, integrated emergency battery backup, adjustable steel leg levelers, convenient side pocket with USB port in handwand.
• 제품 크기 (근사치):
  • 전체 크기: 깊이 44인치 x 너비 39.5인치 x 높이 44인치
  • Outside Arm Width: 39.5"
  • Arm Height from Seat: 6.5"
  • Seat Width: 27"
  • Seat to Floor: 20"
  • Seat Depth: 20.5"
  • Top of Back to Seat: 27"
  • Top of Back to Floor: 43.5"
• Overall Chair Weight: 143파운드(64.8kg)

보증 정보

Mega Motion provides the following warranty for the Vance Ultimate Power Recliner Chair, model NM7001:

• 부품 및 서비스: 1 년 제한 보증.
• 리프트 프레임: 평생 제한 보증.

Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the documentation included with your purchase or contact Mega Motion customer support.

고객 지원

For further assistance, technical support, or warranty inquiries regarding your Mega Motion Vance Ultimate Power Recliner Chair, please contact Mega Motion customer service.

연락처 정보:

• Web대지: Visit the official Mega Motion web지원 리소스와 연락처 정보는 사이트에서 확인하세요.
• 핸드폰: Refer to your product packaging or the Mega Motion web최신 고객 서비스 전화번호를 확인하려면 사이트를 방문하세요.

When contacting support, please have your model number (NM7001) and proof of purchase readily available.