Audiovox Universal Vehicle Mount System IPD-UNVBT Instruction Manual

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your Audiovox Universal Vehicle Mount System IPD-UNVBT. This system is designed to securely hold and charge tablets in a vehicle, and includes Bluetooth headphones for private audio listening. Please read this manual thoroughly before use to ensure proper functionality and safety.

패키지 내용:

• Universal Tablet Dock
• Universal Seat Back Dock (Steel Reinforced)
• 12 Volt Power Cable
• 3.5mm ~ 3.5mm 오디오 케이블
• Rechargeable Bluetooth Headphone
• 사용 설명서 (본 문서)

2. 안전 정보

• Ensure the mount is securely installed before placing a tablet or driving the vehicle. Loose mounts can become projectiles in an accident.
• 운전자의 시야를 방해하지 마십시오. view or interfere with vehicle controls or airbags.
• Keep cables clear of moving parts and away from areas where they could be pinched or damaged.
• 제품을 분해하거나 개조하지 마십시오. 모든 서비스는 자격을 갖춘 전문가에게 맡기십시오.
• 기기를 극한의 온도, 장시간 직사광선 또는 과도한 습기에 노출시키지 마세요.
• Always supervise children when they are using the system to prevent misuse or damage.

3. 설정

3.1. Mounting the Seat Back Dock

The universal seat back dock features steel-reinforced construction for stability. It is designed to attach to the headrest posts of most vehicle seats.

1. Identify suitable headrest posts on the desired seat.
2. Position the seat back dock against the seat back, aligning its clamps with the headrest posts.
3. CL을 단단히 조입니다.amps onto the headrest posts until the dock is firmly in place and does not wobble.

Image 1: Universal Tablet Dock with a tablet mounted in landscape orientation.

3.2. 태블릿 홀더 부착

The adjustable tablet holder attaches to the universal seat back docking station.

1. Align the mounting mechanism on the back of the universal tablet holder with the corresponding slot on the seat back dock.
2. Slide the tablet holder into the slot until it clicks securely into place. Ensure it is locked and cannot be easily dislodged.

Image 2: Universal Tablet Dock with a tablet mounted in portrait orientation.

3.3. 전원 연결

The system includes two USB charging ports for powering your tablet and other devices.

1. Connect the provided 12 Volt power cable to the power input port on the tablet dock.
2. Plug the other end of the 12 Volt power cable into your vehicle's cigarette lighter or 12V accessory socket.
3. The USB charging ports will now be active. Connect your tablet's charging cable to one of the USB ports on the dock.

이미지 3: 후면 view of the tablet dock, highlighting the two USB charging ports.

3.4. Audio Connection (Optional)

Use the 3.5mm to 3.5mm audio cable to connect your tablet's headphone jack to the audio input on the dock if you wish to use the built-in FM transmitter.

3.5. Bluetooth Headphone Pairing

The included rechargeable Bluetooth headphones allow for private listening.

1. Ensure the Bluetooth headphones are charged.
2. Power on the Bluetooth headphones (refer to the headphone's specific manual for power-on instructions if needed).
3. Activate Bluetooth on your tablet or audio source.
4. 검색 available Bluetooth devices and select the Audiovox headphones from the list.
5. Once paired, audio from your tablet will be routed to the headphones.

4. 사용 설명서

4.1. Inserting and Removing a Tablet

The universal tablet holder features an adjustable clamp 기구.

1. 삽입하려면: 조절 가능한 클립을 살살 당겨서 분리하세요.amps on the tablet holder. Carefully place your tablet into the holder, ensuring it is centered and the clamps securely grip the tablet's edges without obstructing buttons or ports. The clamp mechanism will automatically adjust to the tablet's width.
2. 제거하려면: 조절 가능한 클립을 살살 당겨서 분리하세요.amps and lift the tablet out of the holder.

이미지 4: 측면 view of the tablet dock demonstrating how a tablet is secured.

4.2. 충전 장치

With the 12 Volt power cable connected, the two USB ports on the dock provide power for charging your tablet or other USB-powered devices.

• Connect your device's USB charging cable to one of the available USB ports on the dock.
• Ensure your vehicle's ignition is on or the 12V accessory socket is powered for charging to occur.

4.3. Using the Built-in FM Transmitter

The built-in FM transmitter allows you to play audio from your tablet through your vehicle's FM radio.

1. Connect your tablet to the dock's audio input using the 3.5mm audio cable (as described in Section 3.4).
2. Tune your vehicle's FM radio to an unused frequency (one with static or no broadcast).
3. Adjust the FM transmitter frequency on the tablet dock to match your vehicle's radio frequency. (Specific controls for FM transmitter frequency adjustment are typically located on the dock itself or via a connected app, refer to the dock's interface for details).
4. Play audio on your tablet, and it should now transmit through your vehicle's speakers.

4.4. Using Bluetooth Headphones

Once paired (Section 3.5), the Bluetooth headphones provide wireless audio.

• Power on the headphones. They should automatically reconnect to the last paired device.
• Adjust volume directly on the headphones or your tablet.
• To conserve battery, power off the headphones when not in use.

5. 유지관리

5.1. 청소

• 청소하기 전에 전원 케이블을 분리하세요.
• Wipe the surfaces of the mount and headphones with a soft, dry, or slightly damp 옷감.
• Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the finish or internal components.
• Ensure all components are completely dry before reconnecting power.

5.2. 보관

• When not in use for extended periods, store the system in a cool, dry place away from direct sunlight.
• If removing the mount from the vehicle, store it in its original packaging or a protective bag to prevent damage.

6. 문제 해결

6.1. No Power to Dock/Charging Ports

• Check 12V Connection: Ensure the 12 Volt power cable is securely plugged into both the dock and the vehicle's 12V accessory socket.
• 차량 출력: Verify that the vehicle's ignition is on, or the 12V socket is active (some vehicles require the ignition to be on).
• 퓨즈: Check the fuse in your vehicle's 12V accessory socket. Replace if blown.

6.2. Tablet Not Charging

• Power to Dock: Ensure the dock is receiving power (refer to 6.1).
• USB 케이블 : Try a different USB charging cable. Ensure the cable is fully inserted into both the tablet and the dock's USB port.
• 태블릿 호환성: Confirm your tablet is compatible with standard USB charging.

6.3. No Audio from FM Transmitter

• 오디오 케이블 : Ensure the 3.5mm audio cable is securely connected between the tablet and the dock.
• 주파수 일치: Verify that the FM transmitter frequency on the dock exactly matches the frequency tuned on your vehicle's FM radio.
• 볼륨 레벨: Check the volume on both your tablet and your vehicle's radio.
• 간섭: Try a different FM frequency if there is local radio interference.

6.4. Bluetooth Headphones Not Pairing/Connecting

• Headphone Power/Charge: 헤드폰 전원이 켜져 있고 배터리 충전량이 충분한지 확인하십시오.
• 블루투스 켜기: Verify Bluetooth is enabled on your tablet/audio source.
• 페어링 모드 : Put the headphones into pairing mode (usually by holding the power button until an indicator light flashes).
• 장치 삭제 : If previously paired, try 'forgetting' the headphones from your tablet's Bluetooth settings and re-pairing.
• 거리: Ensure the headphones are within close proximity to the tablet during pairing.

7. 사양

8. 보증 및 지원

For warranty information and technical support, please refer to the official Audiovox web사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.

제조업체: 오디오복스

Web대지: www.audiovox.com (참고: 이것은 플레이스홀더입니다. URL. 올바른 지원에 대해서는 제품 포장이나 공식 문서를 참조하십시오. web대지.)