Powell Twin Over Full Pewter Bunk Bed Instruction Manual

안전 경고

WARNING: To help prevent serious or fatal injuries from entrapment or falls:

• Never allow a child under 6 years old on the upper bunk.
• 항상 권장 크기의 매트리스나 매트리스 지지대 또는 둘 다를 사용하여 갇히거나 넘어질 가능성을 방지하십시오.
• Use only a mattress which is 74"-75" long and 37-1/2"-38-1/2" wide on the upper bunk, 74"-75" long and 53-1/2"-54-1/2" wide on the lower bunk.
• Ensure thickness of mattress does not exceed 8" and surface of mattress is at least 5" below upper edge of guardrails.
• 항상 상단 침대의 긴 양쪽에 난간을 사용하십시오.
• If bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.
• Prohibit horseplay on or under bed(s) and prohibit jumping on the bed.
• 위층 침대에 두 명 이상의 사람을 금지하십시오.
• 위층 침대에 오르내릴 때는 사다리를 이용하세요.
• Maximum total weight is not to exceed 300 lbs. on the upper bunk.
• 가드레일, 사다리 및 기타 구성 요소가 적절한 위치에 있고 손상되지 않았는지, 모든 커넥터가 단단히 조여져 있는지 주기적으로 확인하고 확인하십시오.
• Do not use substitute parts. Replacement parts, including additional guardrails, may be obtained from our customer service department.
• Use of water or sleep flotation mattresses is prohibited.
• 야간 조명을 사용하면 이층 침대를 사용하는 어린이에게 추가적인 안전 예방 조치를 제공할 수 있습니다.
• 상단 침대 끝 부분과 상자에 표시된 경고 정보를 따르십시오.
• 이 지침을 향후 참고용으로 보관하세요.

STRANGULATION HAZARD: Never attach or hang items to any part of the bunk bed that are not designed for use with the bed; for examp고리, 벨트, 줄넘기 등을 포함하나 이에 국한되지 않습니다.

안전 이상view 동영상

이 영상은 시각적으로 다음을 제공합니다.view of the bunk bed and highlights key safety considerations. It demonstrates the bed's structure and features from various angles, reinforcing the importance of proper setup and adherence to safety guidelines.

부품 목록

조립하기 전에 모든 부품이 있는지, 손상되지 않았는지 확인하십시오. 부품 식별은 아래 그림을 참조하십시오.

Image showing the side profile of the Powell Twin Over Full Pewter Bunk Bed, illustrating the upper and lower bunk frames and the integrated ladder. This view helps in identifying the main structural components.

For a detailed visual breakdown of parts, please refer to the assembly video below, specifically the segment from 0:13 to 0:19.

• Left End Frame
• Right End Frame
• Upper Guardrail (Long)
• Upper Guardrail (Short)
• Upper Bed Base
• Lower Bed Base
• 사다리
• Support Legs (for lower bed base)

하드웨어 목록:

조립 설명서

올바른 조립을 위해 다음 단계를 주의 깊게 따르십시오. 조립에는 성인 두 명이 함께하는 것이 좋습니다.

조립 비디오 가이드

This video provides a step-by-step visual guide for assembling the Powell Twin Over Full Pewter Bunk Bed, demonstrating each connection and hardware usage.

Step 1: Attach Bed Bases to End Frames

Connect the upper bed base (5) and lower bed base (6) to the left end frame (1) and right end frame (2). Use 16 sets of Bolt (C), Spring Washer (G), and Flat Washer (E) for these connections. Ensure all connections are finger-tight at this stage.

Diagram illustrating the attachment of the upper and lower bed bases to the main end frames using specified bolts and washers. This forms the primary structure of the bunk bed.

Step 2: Install Support Legs for Lower Bed Base

Attach the two support legs (8) to the center of the lower bed base (6). Secure these with 2 sets of Bolt (B), Spring Washer (H), and Flat Washer (F).

Image showing the installation of the central support legs for the lower bunk, providing additional stability to the bed base.

Step 3: Attach Ladder

Secure the ladder (7) to the lower bed base (6) using 2 sets of Bolt (A), Spring Washer (G), and Flat Washer (E). Attach the top of the ladder to the upper bed base (5) using 2 sets of Bolt (B), Spring Washer (H), and Flat Washer (F).

Illustration detailing how to securely attach the ladder to both the upper and lower bunk frames, ensuring safe access to the top bunk.

Step 4: Install Guardrails

Attach the long upper guardrail (3) and short upper guardrail (4) to the upper end frames (1 and 2) and upper bed base (5). Use 7 sets of Bolt (D), Spring Washer (H), and Flat Washer (F) for these connections. Use the Allen Key (I) to tighten all bolts securely from all previous steps.

Diagram showing the final step of attaching the safety guardrails to the upper bunk, emphasizing the importance of secure fastening for user safety.

작동 지침

• 매트리스 배치: Place a Twin size mattress (74"-75" L x 37-1/2"-38-1/2" W) on the upper bunk and a Full size mattress (74"-75" L x 53-1/2"-54-1/2" W) on the lower bunk.
• 매트리스 두께: The thickness of the upper bunk mattress should not exceed 8 inches. The surface of the upper mattress must be at least 5 inches below the top edge of the guardrails.
• 중량 용량: The upper bunk has a maximum static weight capacity of 300 lbs. The lower bunk also supports up to 400 lbs. Do not exceed these limits.
• 사다리 사용법: Always use the integrated ladder for safe entry and exit from the upper bunk.
• 안전 난간: Ensure guardrails are always in place on both long sides of the upper bunk.

A lifestyle image of the bunk bed fully assembled with mattresses and bedding, demonstrating its intended use in a bedroom setting.

유지

• 정기 검사: Periodically check all bolts, screws, and connectors to ensure they are tight. Retighten as necessary to maintain structural integrity.
• 구성 요소 확인: Inspect guardrails, the ladder, and all other components for any signs of damage, wear, or loose connections. Replace any damaged parts immediately.
• 청소: 금속 프레임을 부드러운 천으로 닦으세요.amp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the pewter finish.
• 부품 교체: Do not use substitute parts. For replacement parts, including additional guardrails, contact the manufacturer's customer service department.

문제 해결

• 흔들림 또는 불안정성: If the bunk bed feels unstable, re-check all assembly bolts and ensure they are fully tightened. Ensure the bed is placed on a flat, level surface.
• 잃어버린 부분들: If any parts are missing upon unboxing, refer to the parts list and contact customer service for replacements.
• 조립의 어려움: Review the assembly video and step-by-step instructions. Ensure correct hardware is used for each step. Do not force parts together.

명세서

보증 및 지원

For warranty information or customer support, please refer to the documentation included with your purchase or contact Powell customer service directly. Keep your proof of purchase for any warranty claims.