SOUNDSATION KS-10 조절식 스틸 키보드 스탠드 사용 설명서

1. 서론

Thank you for choosing the SOUNDSATION KS-10 Adjustable Steel Keyboard Stand. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your new keyboard stand. Please read this manual thoroughly before use and retain it for future reference.

The KS-10 stand is designed to provide stable support for various keyboards and small to medium-sized workstations. Its robust steel construction and adjustable height mechanism ensure optimal comfort and performance for musicians.

2. 안전 정보

안전한 작동을 보장하고 손상을 방지하려면 다음 안전 예방 조치를 준수하세요.

• Always ensure the stand is placed on a flat, stable, and non-slip surface.
• Do not exceed the maximum weight capacity of the stand. While not explicitly stated, ensure the stand can comfortably support your instrument.
• Before placing an instrument, verify that all adjustment mechanisms are securely locked in place.
• Keep fingers and clothing clear of moving parts during adjustment to prevent pinching.
• Do not allow children to play with or climb on the stand.
• 스탠드에 마모, 손상 또는 헐거워진 부품이 있는지 정기적으로 점검하십시오. 손상된 경우 사용하지 마십시오.

3. 패키지 내용

The SOUNDSATION KS-10 package typically includes:

• 1 x SOUNDSATION KS-10 Keyboard Stand (main frame)
• 4 x Rubber end caps for feet (pre-installed or separate)
• 4 x Rubber sleeves for instrument support arms (pre-installed or separate)
• Assembly tool (if required for initial setup, e.g., Allen key)

Note: Components may vary slightly. Please check all packaging carefully.

4. 설정 지침

Follow these steps to assemble and set up your KS-10 keyboard stand:

4.1 스탠드 펼치기

1. 스탠드를 포장에서 조심스럽게 꺼내세요.
2. Place the folded stand on a flat surface.
3. Gently pull the two main sections of the stand apart until the X-frame begins to open.

Figure 1: The SOUNDSATION KS-10 Keyboard Stand in its open X-frame configuration. This image shows the stand ready for use, with the top arms and bottom feet extended.

4.2 높이 조절

The KS-10 features a 5-position snap mechanism for quick and easy height adjustments:

1. Locate the central adjustment mechanism on the stand. This typically involves a spring-loaded pin and a series of holes.
2. Press the spring-loaded pin to disengage it from its current position.
3. While holding the pin, adjust the height of the stand by moving the X-frame inwards or outwards.
4. Once the desired height is reached (between 640mm and 980mm), release the pin, ensuring it securely locks into one of the five available holes.
5. Gently test the stand's stability before placing your instrument.

Figure 2: Illustration of the quick height adjustment feature, showing the stand can be adjusted between 640mm and 980mm using a 5-position snap mechanism.

5. 스탠드 조작

Once assembled and adjusted, using your KS-10 stand is straightforward:

1. Ensure the stand is stable and on a level surface.
2. Carefully place your keyboard or workstation onto the support arms of the stand. Ensure it is centered and balanced.
3. The rubber sleeves on the support arms provide grip and protect your instrument from scratches.
4. Before playing, gently push down on the instrument to confirm it is securely seated and the stand remains stable.

Figure 3: A musician using the SOUNDSATION KS-10 stand with a keyboard in a typical indoor setup, demonstrating its practical application.

Figure 4: The SOUNDSATION KS-10 stand being used by musicians in an outdoor setting, emphasizing its lightweight and portable design for various environments.

6. 유지관리

Proper maintenance will extend the life of your keyboard stand:

• 청소: 스탠드를 부드러운 천으로 닦으세요.amp cloth to remove dust and dirt. Avoid abrasive cleaners or solvents that could damage the epoxy finish.
• 점검: Periodically check all joints, bolts, and the adjustment mechanism for tightness and proper function. Ensure the rubber end caps and sleeves are intact and not worn.
• 저장: 사용하지 않을 때는 스탠드를 접어서 보관하십시오. 극한 온도 변화를 피해 건조하고 안전한 곳에 보관하십시오.

7. 문제 해결

If you encounter issues with your KS-10 stand, refer to the following:

• 스탠드가 불안정하게 느껴집니다.
  • 스탠드가 평평하고 수평인 표면에 놓여 있는지 확인하십시오.
  • Verify that the height adjustment pin is fully engaged in one of the holes.
  • Check that all rubber feet are present and making contact with the ground.
• 높이 조절이 어렵습니다.
  • Ensure the spring-loaded pin is fully depressed before attempting to adjust.
  • 조절 장치에 장애물이 있는지 확인하십시오.
  • Apply a small amount of silicone-based lubricant to the moving parts if resistance persists (avoid oil-based lubricants).
• Instrument sliding on support arms:
  • Ensure the rubber sleeves on the support arms are clean and free of dust or debris.
  • Verify that the instrument is centered and balanced on the stand.

8. 사양

참고 : 사양은 예고없이 변경 될 수 있습니다.

9. 보증 및 지원

SOUNDSATION products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or spare parts, please refer to the warranty card included with your purchase or visit the official SOUNDSATION web대지.

For further assistance, please contact your local dealer or SOUNDSATION customer service.