Bromic Heating Smart-Heat Platinum 500 Radiant Infrared Patio Heater User Manual

1. 서론

This manual provides essential information for the safe and efficient operation of your Bromic Heating Smart-Heat Platinum 500 Radiant Infrared Patio Heater. This natural gas heater delivers 39,800 BTU/hour of direct heat, designed to warm outdoor living spaces effectively. Please read all instructions carefully before installation and use.

그림 1: 전면 view of the Bromic Heating Smart-Heat Platinum 500 Radiant Infrared Patio Heater.

2. 중요한 안전 정보

경고: 부적절한 설치, 조정, 변경, 서비스 또는 유지 관리로 인해 부상을 입거나 재산 피해가 발생할 수 있습니다. 이 장비를 설치하거나 서비스하기 전에 설치, 작동 및 유지 관리 지침을 철저하게 읽으십시오.

• 히터를 작동할 때는 적절한 환기가 이루어지도록 하십시오.
• 이 기기나 다른 기기 근처에서 가솔린이나 기타 가연성 증기 및 액체를 보관하거나 사용하지 마십시오.
• 히터가 작동하는 동안에는 어린이와 애완동물이 히터에 접근하지 못하도록 하세요.
• Maintain clear distances from combustible materials as specified in the installation section.
• 이 제품에는 캘리포니아 주에서 암, 선천적 기형 또는 기타 생식 기능 장애를 유발하는 것으로 알려진 화학 물질이 포함되어 있습니다. (캘리포니아 주 법률 제65호 경고)

3. 제품 특징

• Sleek Contemporary Styling: Features brushed stainless steel and tinted ceramic glass for an aesthetic design.
• Radiant Infrared Burner: Heats up quickly, providing direct heat to warm individuals in the area.
• 바람 저항: Designed to operate effectively in winds up to 12 miles per hour for consistent heating.
• 조절 가능한 장착 브래킷: The wall bracket houses the control system away from heat and allows the heater head to pivot 25-degrees to the left and right of center for directional heat.
• 다양한 응용 프로그램: 주거 및 상업 시설 모두에 적합합니다.
• Automatic Reignition: Provides continuous heat and convenience.
• 내구성 있는 구조: Made of stainless steel with a brushed finish.
• 전자식 점화 시스템: Requires 120V for operation.

Figure 2: The sleek design of the Bromic Platinum 500 heater.

4. 설치

Installation of the Bromic Smart-Heat Platinum 500 heater should be performed by a qualified and licensed professional in accordance with local codes and regulations.

4.1 장착 옵션

The heater offers flexible mounting options:

• 잘 고정된: Utilize the provided mounting bracket. The bracket allows the heater to pivot 25 degrees left or right.
• Ceiling Suspended: Can be hung from the ceiling using an optional Ceiling Post Mount (not included).

The optimum mounting height is 8 feet from the floor to the bottom of the heater. If the distance above the heater is less than 42 inches, or if the heater will be exposed to elements, an accessory Heat Deflector must be used.

그림 3: 측면 view illustrating the mounting bracket and design.

4.2 가스 및 전기 연결

• Connect to a natural gas supply. All gas connections must comply with local codes.
• The electronic ignition system requires a 120V electrical supply. Ensure proper grounding.

5. 사용 설명서

5.1 히터 작동시키기

1. 가스 공급 밸브가 열려 있는지 확인하십시오.
2. Activate the electronic ignition system (requires 120V). The heater features automatic reignition.
3. Allow a few minutes for the radiant elements to reach full operating temperature.

5.2 Adjusting Heat Direction

The mounting bracket allows the heater head to pivot 25 degrees to the left or right. Carefully adjust the heater's angle to direct heat to your desired area. Ensure the heater is cool before making physical adjustments.

5.3 히터 끄기

1. Deactivate the electronic ignition system.
2. Close the main gas supply valve if the heater will not be used for an extended period.

6. 유지관리

Regular maintenance ensures optimal performance and longevity of your heater. Always ensure the heater is completely cool and the gas supply is turned off before performing any maintenance.

• 청소: 주기적으로 부드러운 천으로 외부 표면을 닦으십시오.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
• 세라믹 유리: The tinted ceramic glass should be inspected for cracks or damage. Clean gently if necessary.
• 버너 검사: Annually, have a qualified technician inspect the burner and gas connections for any blockages or wear.
• Heat Deflector: If an optional heat deflector is installed, ensure it is free from debris.

7. 문제 해결

If you encounter issues with your heater, refer to the following common troubleshooting steps. For complex problems, contact a qualified service technician.

7.1 Heater Not Igniting

• Check if the natural gas supply valve is fully open.
• Verify that the 120V electrical supply for the electronic ignition is active.
• Ensure there are no obstructions around the burner.

7.2 Insufficient Heat Output

• Confirm the heater is positioned correctly to direct heat to the desired area.
• Check for strong winds exceeding 12 mph, which can reduce heating effectiveness.
• Ensure the area is within the recommended heating coverage of 200 square feet.

8. 사양

Figure 4: Dimensional drawing of the heater.

9. 보증 및 지원

For warranty information and customer support, please refer to the documentation included with your product or visit the official Bromic Heating web대지. 보증 청구를 위해 구매 영수증을 보관하십시오.