HAND CT-6616 Magnetic Badge Holder Instruction Manual

소개

This manual provides instructions for the HAND CT-6616 Strong Magnetic Badge Name Holder. This product is designed for securely attaching identification badges, name tags, or other lightweight items to clothing without pins, preventing damage to fabric.

설정 및 조립

The CT-6616 magnetic badge holder consists of two main parts: a metal plate with adhesive (for attaching to the badge) and a magnetic plate (worn under clothing).

1. Prepare Your Badge: Ensure the surface of your identification badge or name tag 깨끗하고 건조합니다.
2. 금속판 부착: Peel the protective backing from the adhesive side of the metal plate. Carefully align and press the metal plate firmly onto the back of your badge. Apply pressure for a few seconds to ensure a strong bond.
3. Position on Clothing: Place your badge (now with the attached metal plate) on the desired outer surface of your clothing.
4. Secure with Magnetic Plate: On the inside of your clothing, directly behind where the badge is positioned, place the magnetic plate. The strong magnets will attract, securing the badge in place.

이미지 설명: 클로즈업 view of the two components of the magnetic badge holder: a metal plate with adhesive and a separate magnetic plate. This illustrates how the two parts connect through fabric.

작동 지침

Once assembled, the magnetic badge holder is ready for use.

• 놓기: Position the badge holder on a flat, non-bulky part of your clothing for optimal magnetic hold.
• 제거: To remove the badge, gently separate the magnetic plate from the inside of your clothing. Avoid pulling directly on the badge itself to prevent stress on the adhesive.
• 저장: When not in use, store the magnetic badge holder away from sensitive electronic devices, credit cards, or medical implants (e.g., pacemakers) to prevent interference.

유지 보수 및 관리

The CT-6616 magnetic badge holder requires minimal maintenance.

• 청소: Wipe the surfaces with a soft, dry cloth if needed. Do not use abrasive cleaners or immerse in water.
• 접착 지속 시간: The adhesive on the metal plate is designed for a single, permanent application. Avoid repositioning the metal plate once it has been firmly attached to a badge.
• 자기 강도: The magnets are designed for long-term use and should retain their strength under normal conditions.

문제 해결

If you encounter issues with your magnetic badge holder, consider the following:

• Badge Not Holding Securely:
  • Ensure the magnetic plate is directly behind the metal plate on the badge.
  • Check if the clothing material is too thick or has multiple layers, which can reduce magnetic strength.
  • Verify that the metal plate is firmly adhered to the badge.
• Badge Falling Off:
  • This may indicate insufficient magnetic contact or excessive movement. Re-adjust placement.
  • Avoid using the holder on very loose or slippery fabrics.

명세서

Image Description: The HAND CT-6616 magnetic badge holders displayed in their original packaging, showing a pack of three units. This image provides a visual reference for the product as it is typically sold.