Performance Tool W2977 CAN OBD II Scanner Tool User Manual

제품 끝view

The Performance Tool W2977 CAN OBD II Scanner Tool is an essential diagnostic device for vehicle owners and professionals. It provides a straightforward way to interact with your vehicle's On-Board Diagnostics (OBD-II) system, allowing you to quickly identify and resolve issues indicated by the Check Engine Light.

주요 특징:

• 광범위한 차량 보장: Compatible with most 1996 and newer American, European, and Asian vehicles.
• Powerful Scan Tool: Reads and erases Diagnostic Trouble Codes (DTCs) to pinpoint engine and emissions system problems.
• 사용자 친화적인 인터페이스: Simple operation with clear display and intuitive buttons.
• Emissions Readiness Check: Verifies your vehicle's emissions system status for compliance.
• Full OBD2 Protocol Support: Includes support for the Controller Area Network (CAN) protocol.
• Note: Does not work with 2007 Chevy Silverado models.

설치 가이드

Follow these steps to set up and begin using your W2977 CAN OBD II Scanner Tool:

1. OBD-II 포트를 찾으세요: OBD-II 포트는 일반적으로 차량 운전석 쪽 대시보드 아래에 있습니다. 찾을 수 없는 경우 차량 사용 설명서를 참조하십시오.
2. 스캐너 연결: Plug the scanner's cable connector firmly into the vehicle's OBD-II port. Ensure a secure connection.

Image: Connecting the scanner to the vehicle's OBD-II port.

Image: The W2977 scanner held in hand, connected and ready for use.

Once connected, the scanner will power on automatically. Ensure your vehicle's ignition is in the 'ON' position or the engine is running, as required for proper communication.

작동 지침

진단 문제 코드(DTC) 읽기

1. With the scanner connected and powered on, the display will show 'C.A.N. OBD2'.


Image: Initial display screen of the scanner.

2. 를 누르세요 입력하다 button to initiate the scan. The display will show 'SCAN...' as it communicates with the vehicle.
3. Once the scan is complete, the scanner will display 'Menu: 1. DTC'. Press 입력하다 에게 view the Diagnostic Trouble Codes.


Image: Menu option to view DTC.

4. If codes are present, they will be displayed. Use the 스크롤 button to navigate through multiple codes if applicable.
5. If 'NO CODES' is displayed, it means no active Diagnostic Trouble Codes are currently stored in the vehicle's computer.


Image: Display indicating no trouble codes found.

Erasing 진단 문제 코드(DTC)

참고: Erasing DTCs will turn off the Check Engine Light, but it will not fix the underlying problem. Ensure the issue has been resolved before clearing codes.

1. 메인 메뉴에서 다음을 사용하세요. 스크롤 button to navigate to 'Menu: 2. ERASE'.


Image: Menu option to erase DTCs.

2. 를 누르세요 입력하다 button. The scanner will ask 'ERASE? YES NO'.
3. 누르다 입력하다 again to confirm 'YES'. The display will show 'ERASE DONE!' indicating the codes have been cleared.

유지

To ensure the longevity and proper functioning of your Performance Tool W2977 scanner, follow these maintenance guidelines:

• 청소: 부드럽고 마른 천으로 기기를 닦으세요. 연마성 세제나 용제를 사용하지 마세요.
• 저장: Store the scanner in a clean, dry environment away from extreme temperatures and direct sunlight.
• 케이블 관리: Avoid kinking or sharply bending the cable. Store it neatly coiled to prevent damage.

문제 해결

일반적인 문제:

• 'LINK ERROR!' Displayed:
  This indicates a communication issue between the scanner and the vehicle.


Image: Display indicating a communication error.

• Ensure the scanner cable is securely connected to the OBD-II port.
• Verify the vehicle's ignition is in the 'ON' position or the engine is running.
• Check if your vehicle is compatible with OBD-II (most vehicles 1996 and newer).
• 스캐너 문제인지 확인하기 위해 호환되는 다른 차량에 스캐너를 연결해 보세요.
• 스캐너 전원이 켜지지 않습니다:
  
  • The scanner draws power from the vehicle's OBD-II port. Ensure the connection is secure.
  • Check the vehicle's fuse for the OBD-II port (often labeled 'CIGAR' or 'AUX POWER').
• No Codes Found, But Check Engine Light is On:
  
  • Some intermittent issues may not store a permanent code immediately. Drive the vehicle for a short period and re-scan.
  • Ensure the vehicle's ignition is on or engine is running during the scan.

기술 사양

보증 및 지원

The Performance Tool W2977 CAN OBD II Scanner Tool comes with a 1-year limited warranty. For detailed warranty information and terms, please refer to the official documentation.

For further assistance, troubleshooting, or to access the complete user manual, please refer to the official PDF document:

사용자 매뉴얼 다운로드(PDF)

또한 방문할 수 있습니다 Performance Tool Store on Amazon 자세한 제품 정보와 지원 리소스를 확인하세요.