FiiO E10K-TC Portable USB DAC Headphone Ampliifier 사용 설명서

1. 서론

The FiiO E10K-TC is a high-resolution portable USB Digital-to-Analog Converter (DAC) and headphone amplifier designed to enhance the audio output quality of your computer or other compatible devices. It features a robust design and versatile connectivity options for an improved listening experience.

Figure 1: FiiO E10K-TC Portable USB DAC Headphone Amp리퍼

2. 특징

• 고해상도 오디오: PCM 지원 files up to 24-bit/96 kHz resolution.
• DAC 칩: Utilizes the PCM5102 DAC chip for improved audio quality.
• 낮은 노이즈 플로어: Optimized low-pass filter and selectable bass boost circuit designed for minimal noise.
• Amp라이피케이션 Stage: Features an LMH6643 op amp for transient response and driving power.
• 연결성: Includes 1/8" headphone jack, 1/8" line output, coaxial digital output, and Micro USB input.
• 통제 수단: Volume control, selectable bass boost, and high/low gain switch.
• 내구성 있는 디자인: Brushed aluminum shell and chassis for portable use.

3. 제품 오버view 및 제어

전면 패널

Figure 2: Front Panel of FiiO E10K-TC

• 헤드폰 출력(3.5mm): 여기에 헤드폰을 연결합니다.
• 베이스 부스트 스위치: Toggle to enable or disable bass enhancement.
• 볼륨 노브: Rotate to adjust the output volume. Pushing the knob in also serves as the power on/off switch.

후면 패널

Figure 3: Rear Panel of FiiO E10K-TC

• 마이크로 USB 입력 : Connect to your computer for data and power.
• 동축 디지털 출력: For connecting to an external DAC or amp동축 입력이 있는 앰프.
• 게인 스위치(높음/낮음): Selects high or low gain for different headphone impedances.
• 라인 출력(3.5mm): 외부 장치에 연결하려면 amp리파이어 또는 액티브 스피커.

4. 설정

4.1 컴퓨터에 연결하기

1. Connect the FiiO E10K-TC to your computer using the provided Micro USB cable. The device will draw power directly from the USB port.
2. Your computer should automatically detect the device and install the necessary drivers. For Windows 10, it is recommended to use the default drivers installed by the operating system rather than FiiO's ASIO drivers to avoid potential system instability.
3. Once recognized, select the FiiO E10K-TC as your audio output device in your computer's sound settings.

Figure 4: FiiO E10K-TC connected to a laptop via USB

4.2 헤드폰 또는 스피커 연결하기

1. For headphones, plug your 3.5mm headphone jack into the headphone output port on the front panel.
2. For external speakers or an amplifier, connect a 3.5mm audio cable from the 'Line Out' port on the rear panel to the input of your speakers/amplifier. Alternatively, use the 'Coaxial Out' for digital connection to a compatible device.

Figure 5: FiiO E10K-TC connected to external speakers

5. 사용 설명서

5.1 전원 켜기/끄기

The FiiO E10K-TC powers on automatically when connected to a powered USB port. To turn it off, disconnect the USB cable. The volume knob also functions as an on/off switch by rotating it fully counter-clockwise until it clicks.

5.2 볼륨 조절

Rotate the large knob on the front panel clockwise to increase volume and counter-clockwise to decrease it. Adjust to a comfortable listening level.

5.3 Using Bass Boost

The 'BASS' switch on the front panel allows you to enable or disable bass enhancement. Toggle the switch to 'ON' for increased bass response or 'OFF' for a flatter, more neutral sound profile.

5.4 Selecting Gain

The 'GAIN' switch on the rear panel allows you to select between high (H) and low (L) gain settings. Use the 'L' (low) setting for sensitive headphones or when high volume is not required. Switch to 'H' (high) gain for less sensitive headphones or when more power is needed to drive them effectively.

Figure 6: Front panel with Volume and Bass Boost controls

6. 유지관리

• 부드럽고 마른 천으로 닦아 기기를 깨끗하게 유지하세요. 강한 화학 물질이나 연마재는 사용하지 마세요.
• 기기를 극한의 온도, 직사광선, 습기로부터 보호하세요.
• 장치를 떨어뜨리거나 강한 충격을 가하지 마십시오.
• 모든 케이블이 단단히 연결되어 있는지 확인하되, 무리하게 힘을 주지 마십시오.

7. 문제 해결

7.1 사운드 출력 없음

• Check if the FiiO E10K-TC is properly connected to your computer via USB and receiving power.
• Ensure the E10K-TC is selected as the default audio output device in your computer's sound settings.
• Verify that the volume knob on the E10K-TC is turned up and not at its minimum setting.
• Confirm that your headphones or speakers are correctly plugged into the appropriate output port and are functioning correctly.

7.2 왜곡된 소리

• Reduce the volume on both your computer and the E10K-TC. Distortion can occur if the signal is too strong.
• Check the gain setting. If using sensitive headphones, switch to 'L' (low) gain.
• 오디오 소스를 확인하세요 file 손상되었거나 품질이 낮지 않습니다.
• Try using a different USB port or cable to rule out interference.

7.3 Connectivity Issues (Windows 10)

• If experiencing Blue Screen of Death (BSOD) or other instability, especially when disconnecting the device, ensure you are using the default Windows drivers. FiiO's ASIO drivers may cause issues with Windows 10.
• If you previously installed FiiO ASIO drivers, uninstall them and allow Windows to automatically install its native drivers.

8. 사양

9. 보증 및 지원

FiiO products typically come with a limited warranty. For specific warranty terms, duration, and support, please refer to the warranty card included with your product or visit the official FiiO website. You can also contact FiiO customer service for technical assistance or product inquiries.

FiiO 공식 웹사이트 Web대지: www.fiio.com