Feit 917972 Electric LED Utility Shop Light User Manual

1. 서론

This user manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric LED Utility Shop Light, model 917972. This versatile LED shop light is designed to provide bright, efficient illumination for various indoor spaces such as garages, basements, game rooms, utility rooms, workshops, cabinets, closets, and attics.

Figure 1: Feit Electric LED Utility Shop Light (Model 917972) packaging, highlighting its features and design.

2. 안전 정보

본 제품을 설치하거나 작동하기 전에 모든 안전 지침을 읽고 숙지하십시오. 그렇지 않을 경우 감전, 화재 또는 기타 부상을 입을 수 있습니다.

• 설치 또는 정비 전에 항상 전원을 차단하십시오.
• Do not install near heat sources or in wet locations. This product is designed for indoor use only.
• 장착 표면이 고정물의 무게를 지탱할 수 있는지 확인하세요.
• LED 조명이 켜져 있을 때는 LED 광원을 직접 쳐다보지 마십시오.
• 120V 교류 전원에서만 사용하십시오.
• 이 조명기구의 외부 유연 케이블이나 코드가 손상된 경우, 위험을 피하기 위해 제조업체나 해당 서비스 담당자 또는 유사한 자격을 갖춘 사람만이 교체해야 합니다.

3. 패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• Feit Electric LED Utility Shop Light Fixture (Model 917972)
• Two (2) 6-inch (15 cm) Hanging Cables
• Two (2) Mounting Screws for flush mount installation

4. 설정 및 설치

The Feit Electric LED Utility Shop Light offers two primary installation methods: hanging and flush mount.

4.1. 걸이식 설치

1. Identify the desired location for the shop light. Ensure it is near a power outlet.
2. Attach the two 6-inch (15 cm) hanging cables to the designated slots on the top of the shop light fixture.
3. Securely attach the other end of the hanging cables to a sturdy overhead structure (e.g., ceiling joists, chains, or hooks) using appropriate hardware (not included, unless specified in package contents). Ensure the fixture is level and stable.
4. Plug the power cord into a standard 120V AC grounded outlet.

4.2. Flush Mount Installation

1. Determine the exact mounting points on the ceiling or wall where the fixture will be installed. Mark these points accurately, ensuring they align with the mounting holes on the fixture.
2. Drill pilot holes at the marked locations, if necessary, suitable for the provided mounting screws.
3. Align the fixture's mounting holes with the pilot holes.
4. Insert and tighten the two mounting screws to secure the fixture firmly against the surface. Do not overtighten.
5. Plug the power cord into a standard 120V AC grounded outlet.

5. 사용 설명서

The Feit Electric LED Utility Shop Light is designed for simple operation.

• Once properly installed and plugged into a live 120V AC outlet, the light will illuminate instantly.
• To turn the light ON/OFF, use the wall switch connected to the outlet, or unplug the fixture from the outlet. Note: This fixture does not include an integrated ON/OFF switch or pull chain.
• The LED technology provides instant full brightness with no humming.

6. 유지관리

The Feit Electric LED Utility Shop Light requires minimal maintenance.

• 청소: Ensure the fixture is unplugged and cool before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• LED : The integrated LED lights are designed for long life and are not replaceable. Do not attempt to open the fixture or replace the LEDs.
• 점검: Periodically inspect the power cord and connections for any signs of damage. If damage is found, discontinue use and contact customer support.

7. 문제 해결

If you experience issues with your shop light, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Feit Electric customer support.

8. 사양

9. 보증 및 지원

Feit Electric products are designed for durability and performance. This product is warrantied for five years from the date of purchase against defects in workmanship and materials. For warranty claims or technical support, please contact Feit Electric customer service.

Feit Electric Customer Service:

• Web대지: www.feit.com
• 핸드폰: Refer to the official Feit Electric web현재 연락처 정보는 사이트에서 확인하세요.

보증 목적으로 구매 증빙서류로 구매 영수증을 보관하세요.