소개
구매해주셔서 감사합니다asing the Xoopar Boy Bluetooth Wireless Portable Speaker. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your speaker. Please read this manual carefully before use to ensure proper operation and to maximize your enjoyment of the product.
The Xoopar Boy is a compact and stylish portable speaker designed for use with smartphones, tablets, laptops, and other Bluetooth-enabled devices. Its unique design and powerful sound make it an ideal companion for your audio needs.
그림 1: 전면 view of the Xoopar Boy Bluetooth Speaker in gold.
무엇이 포함됩니까?
- 1 x Xoopar Boy Bluetooth Speaker
- 1 x 마이크로 USB 충전 케이블
설정
1. 스피커 충전
Before first use, fully charge your Xoopar Boy speaker. The speaker has a built-in Li-ion battery.
- Locate the Micro USB charging port on the speaker. This port is typically found on the back or bottom of the speaker.
- Connect one end of the Micro USB cable to the speaker's charging port.
- USB 케이블의 다른 쪽 끝을 USB 전원(예: 컴퓨터 USB 포트, USB 벽면 어댑터)에 연결합니다.
- The LED indicator will show the charging status. It typically takes approximately 2 hours for a full charge.
Figure 2: Charging the Xoopar Boy speaker via Micro USB. The image highlights the power and audio ports.
2. 전원 켜기 / 끄기
- To power on: Locate the ON/OFF switch, usually on the back or bottom of the speaker, and slide it to the "ON" position.
- 전원을 끄려면 ON/OFF 스위치를 "OFF" 위치로 밀어주세요.
그림 3: 상세 view of the speaker's top controls (volume, play/pause) and bottom ports (Micro USB, ON/OFF switch).
작동 지침
1. 블루투스 페어링
The Xoopar Boy speaker uses Bluetooth version 3.0 for wireless connectivity.
- Ensure the speaker is powered on. It will automatically enter pairing mode, indicated by a flashing LED light (color may vary).
- Bluetooth 지원 기기(스마트폰, 태블릿, 노트북)에서 Bluetooth 설정으로 이동합니다.
- 검색 available devices. The speaker should appear as "Xoopar Boy" or a similar name.
- 목록에서 스피커를 선택하여 페어링을 시작하세요.
- Once successfully paired, the LED indicator on the speaker will typically stop flashing and remain solid, and you may hear an audible confirmation tone.
- The effective receiving range is approximately 10 meters (33 feet) without obstructions.
Note: If pairing fails, ensure the speaker is charged and within range. Turn both the speaker and your device's Bluetooth off and on again, then retry the pairing process.
2. 오디오 재생
- 블루투스 모드 : After successful pairing, simply start playing audio on your connected device. The sound will be routed through the Xoopar Boy speaker.
- AUX Mode (if applicable): If your speaker has a 3.5mm audio input port (as suggested by Figure 2), you can connect non-Bluetooth devices using a 3.5mm audio cable (not included). Insert one end into the speaker's audio port and the other into your device's headphone jack. The speaker should automatically switch to AUX mode.
3. 컨트롤
The Xoopar Boy speaker features touch controls on its top surface (refer to Figure 3).
- 재생/일시 정지/통화 응답: Press the central button (often marked with a play/pause icon).
- 볼륨 업: Press the '+' button or the right arrow button.
- 볼륨 작게 : Press the '-' button or the left arrow button.
- 다음 트랙: Long press the '+' button or the right arrow button (functionality may vary by device).
- 이전 트랙 : Long press the '-' button or the left arrow button (functionality may vary by device).
- 통화 종료: Press the central button during a call.
유지
Proper care and maintenance will extend the life of your Xoopar Boy speaker.
- 청소: 부드럽고 마른 천을 사용하여 스피커 외부를 닦으세요. 연마성 세제, 왁스 또는 용제를 사용하지 마세요.
- 방수 기능: 이 스피커는 방수 아님. Avoid exposing it to water, rain, or excessive moisture.
- 온도: Store and operate the speaker in a moderate temperature environment. Avoid extreme heat or cold.
- 배터리 관리 : 배터리 수명을 유지하려면 배터리를 자주 완전히 방전하지 마세요. 장기간 보관할 경우 몇 달에 한 번씩 배터리를 약 50%까지 충전하세요.
- 손질: 스피커를 조심스럽게 다루십시오. 떨어뜨리거나 강한 충격을 주지 마십시오.
문제 해결
If you encounter issues with your Xoopar Boy speaker, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스피커의 전원이 켜지지 않습니다. | 배터리가 소진되었습니다. | 스피커를 최소 2시간 동안 충전하세요. |
| Speaker only works when plugged in. | Battery is not holding a charge or is faulty. | Ensure the charging cable and power source are working. If the issue persists after charging, the battery may need service. |
| Bluetooth 장치와 페어링할 수 없습니다. | Speaker is not in pairing mode; device Bluetooth is off; speaker is out of range; interference. | Ensure speaker is on and LED is flashing (pairing mode). Turn Bluetooth off/on on your device. Move speaker closer to device. Disconnect other Bluetooth devices. |
| 소리가 나지 않거나 볼륨이 작습니다. | Volume on speaker or device is too low; speaker not connected; incorrect audio source. | Increase volume on both speaker and connected device. Re-establish Bluetooth connection. Ensure correct audio output is selected on your device. |
| 사운드 왜곡. | Volume too high; speaker too far from device; low battery. | Reduce volume. Move speaker closer to device. Charge the speaker. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | XBOY31007.13R |
| 블루투스 버전 | 3.0 |
| 정격 출력 | 2 x 3W (총 6W) |
| 수신 범위 | ≥10 meters (33 feet) |
| 전원 공급 장치 | 직류 5V |
| 배터리 유형 | 내장 리튬 이온 |
| 작동 시간 | ≥6시간 |
| 충전 시간 | 약 2시간 |
| 치수(길이 x 너비 x 높이) | 6.3 x 5.91 x 5.51인치(약 160 x 150 x 140mm) |
| 품목 무게 | 8.8kg(0.25온스) |
| 방수복 | 아니요 |
| 제어 방법 | 만지다 |
| 한국어: | 768352946482 |
보증 및 지원
While specific warranty details are not provided in this manual, Xoopar products typically come with a limited warranty against manufacturing defects. Please retain your proof of purchase for any warranty claims.
For further assistance, technical support, or warranty inquiries, please visit the official Xoopar website or contact their customer service. You can find more information and contact details by visiting the Xoopar Store on Amazon.