소개
The StarTech.com SDOCK2U33EB is a dual-bay hard drive docking station designed to provide simultaneous access to two 2.5-inch or 3.5-inch SATA I/II/III hard drives (HDDs) or solid-state drives (SSDs). It connects to a host computer via either a USB 3.0 or an eSATA port, facilitating data backup, disk imaging, or data transfer. This docking station supports hot-swapping of drives and is compatible with various operating systems including Microsoft Windows, Apple OSX, Linux, and Google Chrome OS.
제품 구성품 이상view

그림 1: 전면 view of the docking station with power button and HDD activity indicators.
This image displays the front of the docking station. It features a power button and two LED indicators, labeled HDD1 and HDD2, which illuminate to show drive activity and power status for each bay.

그림 2: 상단 view of the docking station with drive bays.
This image shows the top of the docking station, highlighting the two vertical, top-loading bays designed for inserting 2.5-inch or 3.5-inch SATA drives. Eject buttons for each bay are visible on the left side.

그림 3: 후면 view of the docking station with connectivity ports.
The rear panel of the docking station is shown, featuring the eSATA port, USB 3.0 port, and the DC-IN power input for connecting the power adapter.

Figure 4: Docking station with drives inserted.
This image illustrates the docking station with both a 3.5-inch hard disk drive and a 2.5-inch solid-state drive correctly inserted into their respective bays.

그림 5: 패키지 내용물.
This image displays all items included in the product package: the dual-bay docking station, a USB 3.0 cable, an eSATA cable, a universal power adapter with interchangeable regional plugs, and a printed instruction manual.
설치 지침
- 전원 어댑터 연결: Connect the included universal power adapter to the DC-IN port on the rear of the docking station (refer to Figure 3). Plug the power adapter into a suitable electrical outlet.
- 호스트 컴퓨터에 연결: 원하는 연결 방법을 선택하세요:
- USB 3.0: Connect one end of the supplied USB 3.0 cable to the USB 3.0 port on the rear of the docking station (refer to Figure 3) and the other end to an available USB 3.0 port on your computer.
- eSATA: Connect one end of the supplied eSATA cable to the eSATA port on the rear of the docking station (refer to Figure 3) and the other end to an available eSATA port on your computer.
- 하드 드라이브 삽입: Gently slide your 2.5-inch or 3.5-inch SATA HDDs or SSDs into the top-loading drive bays (refer to Figure 2 and Figure 4). Ensure the drives are fully seated in the SATA connectors.
- 전원 켜기: Press the power button located on the front of the docking station (refer to Figure 1). The power LED will illuminate, and the HDD activity LEDs will flash as the drives initialize.
- 운영 체제 인식: Your operating system should automatically detect and install the necessary drivers for the docking station and the inserted drives. The drives will appear as removable storage devices.
작동 지침
- 드라이브 액세스: Once recognized by your operating system, the inserted drives can be accessed like any other storage device. You can perform file transfers, backups, or disk imaging.
- Hot-Swapping Drives: The docking station supports hot-swapping. To remove a drive, ensure no data transfer is active to or from that specific drive. Safely eject the drive through your operating system's hardware removal function, then press the corresponding eject button on the left side of the docking station to release the drive. You can then insert another drive.
- LED 표시등:
- 그만큼 힘 LED indicates the docking station is powered on.
- 그만큼 하드디스크1 그리고 하드디스크2 LEDs indicate activity for the respective drive bays. They will flash during data transfer.
- UASP Performance: When connected via USB 3.0 to a UASP-enabled host controller and operating system (Windows 8+, Mac OSX 10.8+, Linux), the docking station can achieve up to 70% faster read speeds and 40% faster write speeds compared to conventional USB 3.0.
유지
- 청소: 부드럽고 마른 천을 사용하여 도킹 스테이션 외부를 닦으세요. 액체 세척제나 용제는 사용하지 마세요.
- 드라이브 핸들링: Always handle hard drives with care. Avoid dropping or subjecting them to physical shock.
- 안전한 제거: Before disconnecting the docking station from your computer or powering it off, ensure all drives are safely ejected through your operating system to prevent data corruption.
문제 해결
- 드라이브가 감지되지 않았습니다:
- 전원 어댑터가 제대로 연결되어 있고 도킹 스테이션의 전원이 켜져 있는지 확인하십시오.
- Verify that the USB 3.0 or eSATA cable is firmly connected to both the docking station and the computer.
- Confirm that the hard drives are fully seated in their respective bays.
- Try connecting the docking station to a different USB or eSATA port on your computer.
- Check your computer's Disk Management (Windows) or Disk Utility (macOS) to see if the drives are recognized but require initialization or formatting.
- 데이터 전송 속도가 느림:
- Ensure you are using a USB 3.0 port on your computer for optimal USB speeds.
- If using eSATA, verify your computer's eSATA port supports SATA III (6 Gbps) for maximum performance.
- For USB 3.0, ensure your operating system and host controller support UASP for enhanced performance.
- The speed of the hard drive itself can limit transfer rates.
- 도킹 스테이션 전원이 켜지지 않음:
- Ensure the power adapter is correctly connected to the docking station and a working power outlet.
- 전원 버튼을 꼭 누르세요.
- Specific NAS Connectivity (eSATA): If connecting to a NAS via eSATA and experiencing recognition issues, try connecting both the USB and eSATA cables to the NAS upon power-up. After the NAS has fully started and recognized the device, disconnect the USB cable. The eSATA connection should then function correctly.
명세서
| 모델 번호 | SDOCK2U33EB |
| 하드웨어 인터페이스 | USB 3.0, eSATA |
| 지원되는 드라이브 유형 | 2.5인치 및 3.5인치 SATA I/II/III HDD 및 SSD |
| Supported Drive Quantity | 2 |
| Maximum Data Transfer Rate (USB 3.0) | 5Gbps |
| Maximum Data Transfer Rate (eSATA) | 6 Gbps (SATA III) |
| UASP 지원 | Yes (with compatible host controller and OS) |
| 인클로저 재료 | 플라스틱 |
| 제품 크기(L x W x H) | 5.6" x 5.2" x 2.8"(14.2cm x 13.2cm x 7.1cm) |
| 제품 무게 | 0.49kg(1.08파운드) |
| 운영 체제 호환성 | Microsoft Windows (8/7/Vista/XP/Server 2008/Server 2003), Apple OSX (10.9/10.8/10.7/10.6), Linux, Google Chrome OS™ |
보증 정보
The StarTech.com SDOCK2U33EB Dual-Bay USB 3.0 / eSATA to SATA Hard Drive Docking Station is backed by a 2-year warranty from StarTech.com.
기술 지원
StarTech.com offers free lifetime 24/5 multilingual technical assistance for this product. For further support, troubleshooting, or to access the latest drivers and manuals, please visit the official StarTech.com web대지.
추가 자료 및 연락처 정보는 다음에서 확인하실 수 있습니다. www.스타텍.com