소개
The StarTech.com MSTDP123DP is a 3-Port DisplayPort 1.2 Multi-Stream Transport (MST) Hub designed to connect multiple DisplayPort monitors to a single DisplayPort output on your Windows computer. This device allows for extended or mirrored display configurations, enhancing productivity by utilizing up to three independent displays. It supports resolutions up to dual 4K at 30Hz and 1080p at 60Hz, depending on the system's capabilities and bandwidth allocation. This MST Hub is compatible with DisplayPort 1.2 / HBR2 / MST enabled systems and is intended for use with Windows operating systems only.
제품 끝view
Familiarize yourself with the components of your StarTech.com MSTDP123DP 3-Port DisplayPort 1.2 Splitter.
영상: 앞쪽 view of the StarTech.com MSTDP123DP 3-Port DisplayPort 1.2 Splitter, showing three DisplayPort output ports labeled "OUTPUT".
영상: 뒤쪽 view of the StarTech.com MSTDP123DP 3-Port DisplayPort 1.2 Splitter, showing the power input port and the integrated DisplayPort input cable.
영상: Diagram illustrating the dimensions of the MSTDP123DP hub and the included universal power adapter with various regional plugs.
설치 지침
Follow these steps to set up your MST Hub and connect multiple displays.
- 시스템 호환성 확인:
Ensure your computer's video card supports DisplayPort 1.2 / HBR2 / MST. You can check your video card model in Windows Device Manager (Right-click the Windows icon or press Windows key + "X", then select Device Manager, and expand "Display adapters").
- Connect the MST Hub to your Device:
Plug the integrated DisplayPort cable from the MST Hub into a compatible DisplayPort output on your computer, laptop, or tablet.
동영상: This video demonstrates the physical connection of the MST Hub to a laptop's DisplayPort output and the subsequent power connection.
- Connect Power to the MST Hub:
Plug the included power adapter into the MST Hub's power input port, then connect the power adapter to a wall outlet.
- Connect Displays to the MST Hub:
Plug your DisplayPort cables (or DisplayPort adapters/converters for HDMI, VGA, or DVI monitors) into the DisplayPort output ports on the MST Hub. Connect the other end of these cables to your monitors.
- Power On Your Device:
Power on your computer and log in to your Windows operating system.
Operating Instructions: Display Configuration
After connecting your displays, you will need to configure them within Windows Display Settings.
- 디스플레이 설정에 액세스하려면 다음 단계를 따르세요.
바탕 화면의 빈 영역을 마우스 오른쪽 버튼으로 클릭하고 "디스플레이 설정"을 선택하세요.
- Arrange Displays:
In the Display settings window, you will see representations of your connected monitors. Click the "Identify" button to see which number corresponds to each physical monitor. Drag and drop the monitor representations to match their physical arrangement on your desk.
- 디스플레이 모드 선택:
Under "Multiple displays", choose your desired display mode:
- 디스플레이 확장 : Each monitor acts as a separate workspace, allowing you to spread applications across multiple screens.
- 다음 디스플레이를 복제하십시오. All monitors show the same content.
영상: Visual representation of Extended Mode (independent content on each display) and Mirror Mode (same image on multiple displays).
- 설정 적용:
Click "Apply" to save your display configuration.
Resolution and Bandwidth Considerations
The maximum resolution output depends on your system's video card capabilities and the total bandwidth used by all connected displays. MST technology shares video bandwidth across all attached displays.
영상: Table detailing various video output resolutions (e.g., 1920x1200@60Hz, 2560x1440@60Hz, 3840x2160@30Hz) for three displays and their corresponding total bandwidth percentage usage. Note that 4K@30Hz is supported on two displays, with the third display at 1080p@60Hz or lower.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | MSTDP123DP |
| 상표 | StarTech.com |
| 포트 수 | 3 (DisplayPort Output) |
| 입력 커넥터 | 1x DisplayPort 1.2 Male |
| 출력 커넥터 | 3x DisplayPort 1.2 암 |
| Max Digital Resolutions | 2x 4K 30Hz + 1x 1080p 60Hz (dependent on GPU) |
| 호환 장치 | PC (Windows Only) |
| 치수(길이 x 너비 x 높이) | 15.2 x 3.1 x 0.8인치(대략) |
| 품목 무게 | 0.22파운드(대략) |
| 전원 | 외부 전원 어댑터(포함) |
| 인증 | RoHS, CE, FCC, VESA, DisplayPort |
문제 해결
- 화면이 표시되지 않거나 해상도가 잘못되었습니다:
- Ensure all cables (DisplayPort and power) are securely connected.
- Verify that your computer's graphics card supports DisplayPort 1.2 and MST.
- Update your graphics card drivers to the latest version from the manufacturer's web대지.
- Check Windows Display Settings to ensure displays are detected and configured correctly (extended or duplicated).
- Reduce the resolution of one or more displays if you are exceeding the total available bandwidth of your graphics card or the MST Hub. Refer to the Resolution and Bandwidth Considerations section.
- Displays Not Detected:
- Restart your computer after connecting all displays.
- Ensure the MST Hub is receiving power.
- Test each display individually to confirm they are functional.
- If using DisplayPort to HDMI/VGA/DVI adapters, ensure they are active adapters and compatible with DisplayPort 1.2.
- Intermittent Display Signal:
- 느슨한 케이블 연결을 확인하십시오.
- Ensure DisplayPort cables are of high quality and meet DisplayPort 1.2 specifications.
- Avoid excessive cable lengths.
유지
To ensure the longevity and optimal performance of your MST Hub, consider the following maintenance tips:
- 기기를 깨끗하고 먼지가 없는 상태로 유지하세요. 청소 시에는 부드럽고 마른 천을 사용하세요.
- 극한의 온도, 습도 또는 직사광선에 장치를 노출하지 마십시오.
- 과열을 방지하려면 장치 주변을 적절하게 환기시키십시오.
- Handle cables carefully to prevent damage to connectors and ports.
보증 정보
The StarTech.com MSTDP123DP 3-Port DisplayPort 1.2 Splitter is backed by a 3년 보증. For detailed warranty terms and conditions, please refer to the official StarTech.com web사이트를 방문하거나 고객 지원팀에 문의하세요.
기술 지원
StarTech.com offers free lifetime technical support for this product. If you encounter any issues or require assistance with installation or operation, please visit the StarTech.com website for support resources, FAQs, and contact information for their technical support team.
Web대지: www.스타테크.com