Seco-Larm SK-3523-SDQ

Seco-Larm Enforcer SK-3523-SDQ Heavy-Duty Access Control Keypad User Manual

Model: SK-3523-SDQ

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of the Seco-Larm Enforcer SK-3523-SDQ Heavy-Duty Access Control Keypad. Please read this manual thoroughly before installation and operation to ensure proper functionality and safety.

The SK-3523-SDQ is a robust, outdoor-rated access control keypad designed for secure entry management. It supports up to 210 users and features a durable stainless steel faceplate and a rugged cast-aluminum housing.

2. 안전 정보

기기 손상을 방지하고 사용자의 안전을 확보하기 위해 다음 안전 수칙을 준수하십시오.

  • 전기 안전: Disconnect power before installation or servicing. All wiring should comply with local electrical codes.
  • 환경 조건: Although designed for outdoor use, avoid direct exposure to extreme weather conditions if possible. Ensure proper sealing during installation to maintain its weather resistance.
  • 승인된 직원: Installation and maintenance should only be performed by qualified technicians.
  • 전원 공급 장치: 지정된 전원 공급 장치만 사용하십시오.tage and current ratings to avoid damage.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

  • Seco-Larm Enforcer SK-3523-SDQ Keypad Unit
  • 장착 나사 및 앵커
  • Diode (for inductive loads)
  • 사용 설명서 (본 문서)
  • Security Key (for accessing internal components)

4. 설정 및 설치

Proper installation is crucial for the keypad's performance and longevity.

4.1 키패드 장착

  1. 위치를 선택하십시오 : Select a flat, secure surface for mounting, typically near the access point. Ensure adequate space for wiring.
  2. 표면 준비: Use the keypad as a template to mark drilling points for mounting screws.
  3. 드릴 구멍: Drill pilot holes for the mounting screws and a larger hole for wiring access.
  4. 보안 키패드: Mount the keypad securely using the provided screws and anchors. Ensure the unit is level.
Seco-Larm Enforcer SK-3523-SDQ Keypad

이미지 1: 앞면 view of the Seco-Larm Enforcer SK-3523-SDQ Heavy-Duty Access Control Keypad. It features a stainless steel faceplate with a 12-button numeric keypad, a key lock at the top, and three indicator LEDs (green, yellow, red) above the keypad. The housing is black and rugged.

4.2 배선 연결

Refer to the wiring diagram provided with the product for specific connections. General steps include:

  • 전원 연결: Connect the keypad to a stable 12-24 VDC power supply. Observe polarity.
  • Lock Connection: Connect the keypad's output relays to the electric lock or gate operator. Use the provided diode for inductive loads to prevent back-EMF damage.
  • 종료 버튼 : Connect an optional exit button to the designated terminals.
  • Alarm/Auxiliary Output: Connect to an alarm system or other auxiliary devices if required.

메모: Always ensure power is disconnected before making any wiring changes.

5. 사용 설명서

5.1 프로그래밍 모드

The keypad operates in two main modes: 일반 모드 (for access) and 프로그래밍 모드 (for configuration).

  • 프로그래밍 모드 진입: Enter the Master Code followed by '#'. The yellow LED will illuminate.
  • 프로그래밍 모드 종료: Press '#' or wait for 10 seconds of inactivity.

5.2 사용자 코드 관리

이 키패드는 최대 210개의 사용자 코드를 지원합니다.

  • 사용자 코드 추가:
    1. 프로그래밍 모드로 들어갑니다.
    2. Press '1' (Add User Code).
    3. Enter a 4-8 digit User Code.
    4. Press '#'. The green LED will flash to confirm.
  • 사용자 코드 삭제:
    1. 프로그래밍 모드로 들어갑니다.
    2. Press '2' (Delete User Code).
    3. 삭제할 사용자 코드를 입력하세요.
    4. Press '#'. The red LED will flash to confirm.

5.3 접근 권한 부여

To gain access, users must enter their valid user code followed by '#'.

  • Successful Entry: The green LED will illuminate, and the lock will activate for the programmed duration.
  • Unsuccessful Entry: The red LED will flash, and access will be denied.

6. 유지관리

The SK-3523-SDQ keypad is designed for minimal maintenance. However, regular checks can extend its lifespan:

  • 청소: 키패드 표면을 부드러운 천으로 닦으세요.amp 천으로 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
  • 배선 검사: Periodically check wiring connections for corrosion or damage, especially in outdoor environments.
  • 기능성 테스트: Test the keypad's operation and lock activation regularly to ensure proper function.

7. 문제 해결

문제가능한 원인해결책
키패드 전원이 켜지지 않습니다.전원 공급 없음; 배선 오류; 전원 공급 장치 불량.전원 연결 상태를 확인하고 전원 공급 전압을 점검하십시오.tage; 극성이 올바른지 확인하십시오.
Keypad accepts code but lock does not activate.Incorrect lock wiring; faulty lock; relay issue.Verify lock wiring; test the lock independently; check keypad relay output.
Cannot enter Programming Mode.Incorrect Master Code; keypad malfunction.Ensure correct Master Code is used; reset keypad to factory defaults (refer to full manual for procedure).
Keypad buttons are unresponsive.물리적 손상; 내부 결함.Inspect for damage; contact technical support if issue persists.

8. 사양

  • 모델: SK-3523-SDQ
  • 상표: Seco-Larm Enforcer
  • 입력 Voltage: 12-24VDC
  • 현재 추첨: Standby: 20mA, Active: 80mA
  • 사용자 용량: 210 (1 Master, 209 User Codes)
  • 출력 릴레이: 1 (NO/NC, 2A @ 30VDC)
  • 주택: Cast-aluminum, stainless steel faceplate
  • 환경: 야외 정격
  • 치수: (정확한 치수는 제품 도면을 참조하십시오.)

9. 보증 및 지원

Seco-Larm products are warranted against defects in material and workmanship under normal use for a period of one (1) year from the date of sale to the original customer. For technical support or warranty claims, please contact Seco-Larm customer service or visit their official web대지.

Web대지: www.seco-larm.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.