One Control Minimal Series AB Box Instruction Manual

소개

The One Control Minimal Series AB Box is a compact and versatile signal routing device designed for musicians. It allows you to control the direction of your audio signal path, enabling functions such as selecting between amplifiers, muting your signal, or switching between different input sources. Its robust design ensures durability and low noise performance.

제품 끝view

The AB Box features one input and two outputs (A and B), along with a footswitch to toggle between the outputs. It also includes a 9-volt power input for LED indicator functionality.

주요 특징:

• 컴팩트하고 내구성 있는 디자인.
• One input, two outputs (A and B).
• Footswitch for toggling between outputs.
• LED indicators for active output (requires power).
• Can operate passively without power (LEDs will not function).

설정

Connecting as an Output Selector (1 Input to 2 Outputs):

1. 악기(예: 기타)를 연결하세요. 입력 jack on the AB Box.
2. Connect a cable from the 출력 A jack to your first destination (e.g., Amplifier A).
3. Connect a cable from the 출력 B jack to your second destination (e.g., Amplifier B or a tuner).
4. For LED functionality, connect a 9-volt center negative power supply to the 힘 input. The unit will function passively without power, but the LEDs will not illuminate.

Connecting as an Input Selector (2 Inputs to 1 Output):

1. Connect your first instrument to the 출력 A jack (used as Input 1 in this configuration).
2. Connect your second instrument to the 출력 B jack (used as Input 2 in this configuration).
3. Connect a cable from the 입력 jack (used as Output in this configuration) to your amp신호 체인의 lifier 또는 다음 페달.
4. For LED functionality, connect a 9-volt center negative power supply to the 힘 input. The unit will function passively without power, but the LEDs will not illuminate.

작동 지침

Toggling Outputs/Inputs:

Once connected, press the footswitch to toggle between the active output (A or B) or active input (A or B). If a power supply is connected, the red and blue LEDs will indicate which path is currently active.

Mute/Tuner Switch Functionality:

To use the AB Box as a mute or tuner switch, connect your main signal path to one output (e.g., Output A) and your tuner to the other output (e.g., Output B). When you switch to Output B, your main signal will be muted, allowing you to tune silently. Even without a tuner connected, switching to an unused output will mute your signal.

유지

• 기기를 깨끗하게 유지하고 먼지와 이물질이 쌓이지 않도록 하십시오. 청소할 때는 부드럽고 마른 천을 사용하십시오.
• 극한의 온도, 습도 또는 직사광선에 장치를 노출시키지 마십시오.
• Do not attempt to open the enclosure or modify the internal circuitry, as this may void the warranty and cause damage.
• Ensure all cables are securely connected to prevent signal loss or intermittent operation.

문제 해결

소리 없음:

• Check all cable connections to ensure they are secure and correctly plugged into the designated input/output jacks.
• Verify that the footswitch is set to the desired active output/input.
• Test cables and other equipment in your signal chain to rule out external issues.

LED가 켜지지 않음:

• Ensure a 9-volt center negative power supply is connected to the POWER input.
• Check that the power supply is functioning correctly and providing the specified voltage.
• The unit can operate passively without power, but the LEDs will not light up. This is normal behavior.

원치 않는 소음/윙윙거림:

• 연결된 모든 장비에 적절한 접지가 되어 있는지 확인하십시오.
• 고품질의 차폐형 계측 케이블을 사용하십시오.
• If using two amplifiers, ground loop issues may occur. Consider using a ground loop isolator if necessary.

명세서

보증 및 지원

For warranty information and technical support, please refer to the official One Control web해당 웹사이트를 방문하시거나 공인 대리점에 문의하십시오. 구체적인 보증 조건은 지역 및 판매점에 따라 다를 수 있습니다.