1. 서론
This manual provides essential instructions for the installation, operation, and maintenance of your Maxxima M90450 White 7" Round Bus LED Backup Light. Designed for demanding bus applications, this light offers powerful illumination for enhanced safety during reverse operations. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
2. 안전 정보
제품 및 차량의 손상이나 부상을 방지하기 위해 다음 안전 수칙을 준수하십시오.
- 전기 작업을 수행하기 전에 항상 차량의 배터리를 분리하세요.
- 단락이나 전기적 위험을 방지하기 위해 배선 연결이 올바른지 확인하십시오.
- 설치하는 동안 안전 안경, 장갑 등 적절한 개인 보호 장비를 착용하세요.
- Do not modify the product. Unauthorized modifications may compromise safety and void the warranty.
- 설치 과정에 대해 확신이 서지 않는 부분이 있다면 자격을 갖춘 전문가에게 문의하십시오.
3. 패키지 내용
설치를 시작하기 전에 모든 항목이 있는지 확인하세요.
- 1 x Maxxima M90450 White 7" Round Bus LED Backup Light
- 장착 가스켓 1개
4. 설치 지침
The Maxxima M90450 is designed for a standard 4-hole surface mount. Follow these steps for proper installation:
- 준비: Choose a suitable mounting location on the vehicle's exterior, typically at the rear, ensuring it is flat and provides adequate clearance.
- 교련: Use the light as a template to mark the four mounting holes and a central hole for wiring. Drill pilot holes for the mounting screws and a larger hole for the wiring.
- 배선: The light features 2 wire leads. Connect the positive wire (typically red) to the vehicle's reverse light circuit and the negative wire (typically black) to a reliable ground point on the vehicle chassis. Ensure all connections are secure and insulated.
- 설치: Place the included mounting gasket between the light and the vehicle surface. Align the light with the drilled holes and secure it using appropriate fasteners (not included) through the four mounting holes. Tighten screws evenly to ensure a watertight seal with the gasket.
- 테스트: Reconnect the vehicle's battery. Engage reverse gear (with the parking brake applied and vehicle safely secured) to test the light's functionality.
5. 사용 설명서
The Maxxima M90450 LED Backup Light operates automatically when properly connected to your vehicle's reverse light circuit. When the vehicle is shifted into reverse, the light will illuminate, providing bright white light for improved visibility.
6. 유지관리
The Maxxima M90450 LED Backup Light is designed for durability with sealed, moisture-proof electronics and a rugged polycarbonate lens and housing, requiring minimal maintenance.
- 청소: Periodically clean the lens with a soft cloth and mild soap and water to ensure maximum light output. Avoid abrasive cleaners.
- 점검: Regularly check the mounting screws for tightness and the wiring for any signs of wear or damage.
7. 문제 해결
If the LED backup light is not functioning as expected, consider the following:
- 빛이 켜지지 않습니다:
- Check the vehicle's fuse for the reverse light circuit.
- Verify all wiring connections (positive, negative, and ground) are secure and free from corrosion.
- Ensure the vehicle is properly shifted into reverse.
- 빛이 어둡거나 깜빡거립니다.
- 배선을 검사하여 연결이 느슨하거나 손상되지 않았는지 확인하세요.
- Check the vehicle's electrical system for proper voltage(12.8VDC).
- 렌즈가 더러우면 닦으세요.
If issues persist after troubleshooting, contact Maxxima customer support or a qualified technician.
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | M90450 |
| LED 개수 | 20 개의 백색 LED |
| 설치 | Standard 4-Hole Surface Mount |
| 연결 | 2개의 와이어 리드 |
| 권tage | 12.8VDC |
| Amp 그리다 | 250mA |
| 치수 | 7.0" Diameter x 1.2" Depth (7.3 x 7.1 x 1.8 inches overall) |
| 렌즈 소재 | 폴리카보네이트 |
| 하우징 소재 | 폴리카보네이트 |
| 특별 기능 | Sealed Moisture Proof Electronics, Waterproof |
| 규정 준수 | DOT/SAE J593 |
| 무게 | 11.2 온스 |
9. 보증 및 지원
The Maxxima M90450 White 7" Round Bus LED Backup Light is backed by a 5-year warranty. For technical support, warranty claims, or further assistance, please contact Maxxima customer service. Keep your purchase receipt as proof of purchase.
For more information, visit the official Maxxima web사이트를 참조하거나 제품 포장을 참조하세요.