소개
The StarTech.com SDOCKU33HB is a USB 3.0 SATA Hard Drive Docking Station designed for quick and easy access to 2.5-inch or 3.5-inch SATA solid-state drives (SSDs) and hard disk drives (HDDs). It features a built-in USB Fast Charge hub and supports UASP (USB Attached SCSI Protocol) for enhanced performance with SATA 6Gbps drives. This manual provides instructions for setup, operation, and maintenance of your docking station.
제품 끝view
Familiarize yourself with the components and features of your docking station.
영상: The StarTech.com SDOCKU33HB docking station, showing the top-loading drive bay and front panel.
전면 패널 기능
영상: 앞쪽 view of the docking station, highlighting the USB 3.0 data port and the USB Fast Charge port with its ON/OFF switch.
- USB 3.0 Data Port: 데이터 전송을 위해 컴퓨터에 연결됩니다.
- USB Fast Charge Port: Provides accelerated charging for mobile devices. Features an ON/OFF switch for activation.
후면 패널 기능
영상: 뒤쪽 view of the docking station, showing the power switch, DC-IN port, USB 3.0 host connection, and the OFF/Sleep switch.
- 전원 스위치: Turns the docking station ON or OFF.
- DC 입력 포트: 포함된 전원 어댑터에 연결합니다.
- USB 3.0 호스트 포트: Connects the docking station to your computer's USB 3.0 port.
- OFF/Sleep Switch: Controls the sleep mode functionality of the docking station.
패키지 내용
Verify that all components are present in your package.
영상: The complete package contents, including the docking station, power adapter, USB 3.0 cable, and instruction manual.
- 1x USB 3.0 SATA Hard Drive Docking Station (SDOCKU33HB)
- 범용 전원 어댑터 1개
- 1x USB 3.0 케이블
- 1x 사용 설명서
시스템 요구 사항
Ensure your system meets the following requirements for optimal performance.
- Computer with an available USB 3.0 port (USB 2.0/1.1 backward compatible)
- 2.5-inch or 3.5-inch SATA I/II/III SSD/HDD
- 사용 가능한 AC 전원 콘센트
- Operating System: Windows XP/Vista/7/8/10/11, macOS 10.x and later, Linux
설치 지침
- 전원 연결: Connect the universal power adapter to the DC-IN port on the rear of the docking station, then plug the adapter into an AC power outlet.
- 컴퓨터에 연결: Connect one end of the included USB 3.0 cable to the USB 3.0 Host Port on the rear of the docking station, and the other end to an available USB 3.0 port on your computer.
- 드라이브 삽입: Gently slide your 2.5-inch or 3.5-inch SATA SSD/HDD into the top-loading drive bay until it is securely seated. Ensure the drive's SATA connector aligns with the docking station's connector.
- 전원 켜기: Flip the Power Switch on the rear of the docking station to the 'ON' position. The power LED (if present) should illuminate.
- 드라이버 설치: 운영 체제는 필요한 드라이버를 자동으로 감지하고 설치합니다. 일반적으로 드라이버를 수동으로 설치할 필요는 없습니다.
- 액세스 드라이브: Once detected, the drive will appear as a removable storage device in your operating system's file explorer or disk management utility. You may need to initialize and format new drives before use.
작동 지침
Using the Hard Drive Dock
- 데이터 전송: Once the drive is recognized by your computer, you can drag and drop files to and from the drive as you would with any other storage device.
- 핫 스와핑: The docking station supports hot-swapping. To safely remove a drive, ensure all data transfer operations are complete, then use your operating system's "Safely Remove Hardware" or "Eject" function before pulling the drive out of the bay.
- UASP 지원: For systems supporting UASP, the docking station will leverage this protocol to achieve faster data transfer speeds, especially with SATA 6Gbps drives.
Using the USB Fast Charge Port
- Activate Fast Charge: Flip the "Charge Only" switch on the front panel to the 'ON' position.
- 장치 연결: Connect your mobile device (e.g., smartphone, tablet) to the USB Fast Charge port using its charging cable.
- 충전 중: The port will provide enhanced power output for faster charging compared to standard USB ports.
절전 모드 기능
- The "OFF/Sleep" switch on the rear panel controls the docking station's sleep mode behavior. Consult the full product manual for detailed information on sleep mode settings and compatibility.
유지
- 청소: 도킹 스테이션 외부를 닦을 때는 부드럽고 마른 천을 사용하십시오. 액체 세척제나 용제를 사용하지 마십시오.
- 저장: 사용하지 않을 때는 도킹 스테이션을 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.
- 드라이브 핸들링: Always handle hard drives with care. Avoid dropping or subjecting them to physical shock.
문제 해결
- Issue: Drive not detected by computer.
- 도킹 스테이션의 전원이 켜져 있고 전원 어댑터가 제대로 연결되어 있는지 확인하십시오.
- USB 3.0 케이블이 도킹 스테이션과 컴퓨터에 제대로 연결되어 있는지 확인하십시오.
- 컴퓨터의 다른 USB 포트를 사용해 보십시오.
- Ensure the SATA drive is correctly seated in the docking bay.
- Check your computer's Disk Management (Windows) or Disk Utility (macOS) to see if the drive is recognized but uninitialized or unformatted. New drives require initialization and formatting.
- Test with a different SATA drive to rule out a drive issue.
- 문제: 데이터 전송 속도가 느립니다.
- 컴퓨터의 USB 3.0 포트에 연결되어 있는지 확인하십시오. USB 2.0 포트를 사용하면 속도가 느려집니다.
- Verify your operating system and drivers support UASP for optimal performance with SATA 6Gbps drives.
- The performance of the drive itself can affect transfer speeds.
- Issue: Fast Charge port not working.
- Ensure the "Charge Only" switch on the front panel is in the 'ON' position.
- 도킹 스테이션의 전원이 켜져 있는지 확인하십시오.
- Try a different charging cable or device to confirm the issue is not with the device or cable.
명세서
| 특징 | 사양 |
|---|---|
| 모델 | SDOCKU33HB |
| 인터페이스 | USB 3.0(USB 2.0/1.1과 하위 호환) |
| 호환 드라이브 유형 | 2.5" and 3.5" SATA I/II/III HDDs/SSDs |
| 데이터 전송 속도 | 최대 5Gbps(USB 3.0) |
| UASP 지원 | 예 |
| Fast Charge Port | 예 |
| 치수(길이 x 너비 x 높이) | 3.6" x 3.6" x 6.8"(9.14cm x 9.14cm x 17.27cm) |
| 무게 | 1.4파운드(0.64kg) |
| 색상 | 검은색 |
| 전원 공급 장치 | Universal AC Adapter (Input: 100-240V AC, Output: 12V DC) |
보증 및 기술 지원
이 StarTech.com 제품은 다음의 보증을 받습니다. 2년 보증.
For the most up-to-date information on warranty, technical support, and product documentation, please visit the official StarTech.com website or the product page:
You can also find additional resources and contact information for technical assistance on the StarTech.com web대지.