푸이그 6789W

Puig 6789W Traffic Windscreen Instruction Manual for Honda Wave 12-13

모델: 6789W

1. 서론

This manual provides detailed instructions for the proper installation, operation, and maintenance of your Puig 6789W Traffic Windscreen. This windscreen is specifically designed for Honda Wave models manufactured between 2012 and 2013. Please read this manual thoroughly before beginning installation to ensure correct assembly and safe use of the product.

2. 안전 정보

Always prioritize safety when working on your motorcycle. Failure to follow these safety guidelines may result in injury or damage to the product or motorcycle.

  • Ensure the motorcycle is stable and on a level surface before starting installation.
  • 장갑, 보안경 등 적절한 개인 보호 장비를 착용하세요.
  • Do not overtighten fasteners, as this can strip threads or crack components. Refer to torque specifications if available.
  • 앞유리와 장착 부품에 마모, 손상 또는 헐거움의 징후가 있는지 정기적으로 점검하십시오.
  • 설치 과정의 어떤 단계에 대해서든 확실하지 않은 경우, 자격을 갖춘 오토바이 정비사와 상담하세요.

3. 패키지 내용

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact your retailer.

  • 1x Puig 6789W Traffic Windscreen (Transparent)
  • 1x 장착 하드웨어 키트(브래킷, 볼트, 와셔, 너트)
  • 1x 사용 설명서(이 문서)
Image showing the Puig 6789W Traffic Windscreen and its associated mounting hardware.

Figure 1: The Puig 6789W Traffic Windscreen and its components.

4. 설정 및 설치

This section details the step-by-step process for installing the Puig 6789W Traffic Windscreen on your Honda Wave (2012-2013).

4.1. 필요한 도구

  • 육각렌치 세트
  • 렌치 세트
  • 드라이버 (필요에 따라 십자 드라이버 또는 일자 드라이버)
  • 청소용 부드러운 천

4.2. 설치 단계

  1. 오토바이 준비: Park the Honda Wave on a stable, level surface. Turn off the engine and remove the key.
  2. 장착 지점 식별: Locate the designated mounting points on your Honda Wave's handlebars or front fairing. These are typically existing bolt holes.
  3. 브라켓 조립: Attach the provided mounting brackets to the windscreen using the smaller bolts and washers. Do not fully tighten yet.
  4. 오토바이에 부착하세요: Carefully position the windscreen assembly onto the motorcycle's mounting points. Use the larger bolts, washers, and nuts to secure the brackets to the motorcycle. Hand-tighten all fasteners initially.
  5. 위치 조정: Adjust the windscreen's angle and height to your preferred riding position. Ensure it does not obstruct your view or interfere with steering.
  6. 최종 조임: Once the desired position is achieved, progressively tighten all bolts and nuts. Ensure they are secure but do not overtighten. Double-check all connections.

5. 운영

Once installed, the Puig 6789W Traffic Windscreen operates passively by deflecting wind and debris. No active operation is required. Before each ride, perform a quick visual inspection to ensure the windscreen is securely attached and free from damage.

6. 유지관리

Proper maintenance will extend the life and clarity of your windscreen.

  • 청소: Clean the windscreen regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic material. Rinse thoroughly and dry with a clean, soft cloth.
  • 점검: Periodically check all mounting bolts and nuts for tightness. Vibrations from riding can cause fasteners to loosen over time. Inspect the windscreen for cracks, scratches, or other damage.
  • 저장: If storing the motorcycle for an extended period, consider covering the windscreen to protect it from dust and UV exposure.

7. 문제 해결

이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.

문제가능한 원인해결책
Windscreen vibrates excessively고정 볼트가 헐거워졌거나 설치가 잘못되었습니다.Check and tighten all mounting bolts. Re-evaluate installation steps.
Reduced visibility through windscreenDirt, scratches, or improper cleaning.Clean the windscreen with mild soap and water. Avoid abrasive materials. If scratched, consider replacement.
Windscreen feels loose after riding진동으로 인해 잠금장치가 느슨해졌습니다.Regularly inspect and tighten all mounting hardware.

8. 사양

특징세부 사항
모델 번호6789와트
상표푸이 그
호환성Honda Wave (2012-2013)
색상Transparent / Klar
재료플라스틱
설치 유형Vehicle-specific fit, Self-adhesive
패키지 크기36 x 31 x 16cm
품목 무게500그램

9. 보증 및 지원

Puig 제품은 높은 품질 기준에 따라 제조됩니다. 보증 범위, 클레임 또는 기술 지원에 대한 정보는 Puig 공식 웹사이트를 참조하십시오. website or contact your authorized Puig dealer. Keep your proof of purchase for warranty purposes.

제조업체: 푸이 그

Web대지: www.puig.tv

© 2023 Puig. 모든 권리 보유. 본 매뉴얼은 정보 제공 목적으로만 제공됩니다.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.