Inventum MK350 Milk Frother

소개

Thank you for choosing the Inventum MK350 Milk Frother. This appliance is designed to quickly and efficiently froth milk for various beverages or heat milk to your desired temperature. Please read this manual carefully before using the appliance to ensure safe and optimal operation. Keep this manual for future reference.

중요 안전 지침

• 사용하기 전에 모든 지침을 읽으세요.
• Do not immerse the frother unit or power base in water or other liquids.
• 볼륨을 확보하세요tag기기에 표시된 e는 해당 지역의 주 전원에 해당합니다.tag연결하기 전에 e를 누르세요.
• 이 기기는 가정용으로만 사용하세요. 실외에서 사용하지 마세요.
• 제품은 항상 안정적이고 평평하며 내열성이 있는 표면에 놓으십시오.
• 손상된 코드나 플러그를 사용하거나, 기기가 오작동하거나 어떤 방식으로든 손상된 후에는 기기를 작동하지 마십시오.
• 기기와 코드를 어린이의 손이 닿지 않는 곳에 보관하세요.
• 뜨거운 표면을 만지지 마십시오. 손잡이나 손잡이를 사용하십시오.
• 사용하지 않을 때와 세척하기 전에는 콘센트에서 플러그를 뽑으세요. 부품을 끼우거나 떼기 전과 기기를 세척하기 전에 식히세요.
• 제조업체가 권장하지 않는 부속품은 사용하지 마십시오.

제품 끝view

Familiarize yourself with the components of your Inventum MK350 Milk Frother.

그림 1: This image displays the Inventum MK350 Milk Frother from the front, showcasing its stainless steel upper body, black base, handle, and the control panel with indicator lights and power button.

그림 2: 측면 view of the Inventum MK350 Milk Frother, emphasizing the ergonomic handle and the pouring spout integrated into the stainless steel jug.

그림 3: A view into the interior of the milk frother, highlighting the non-stick coating and the small central pin where the frothing whisk is attached.

그림 4: A close-up image of the small, detachable whisk with a spring coil, designed for creating milk foam. This whisk attaches to the central pin inside the frother.

그림 5: The separate power base for the milk frother, featuring a central connector for the frother unit and a power cord.

구성 요소:

• 거품기 용기: 내부가 눌러붙지 않는 스테인리스 스틸 주전자.
• 핸들: Ergonomic handle for safe pouring.
• 뚜껑: Transparent lid (not explicitly shown but implied for frother).
• 거품기: Detachable whisk with spring coil for frothing.
• 가열 털이: (If applicable, otherwise use frothing whisk for heating too). The input suggests one whisk for frothing.
• 제어판: Power button and indicator lights for different functions.
• 파워 베이스: Cordless 360-degree rotating base with power cord.

설정

1. 짐 풀기: Carefully remove all packaging materials. Retain packaging for future storage or transport.
2. 초기 청소: Before first use, clean the frother jug and whisk according to the 'Maintenance and Cleaning' section. Wipe the exterior of the power base with a damp 옷감.
3. 놓기: Place the power base on a dry, stable, and level surface away from water sources and heat.
4. 털 부착: Insert the frothing whisk onto the central pin inside the frother jug. Ensure it is securely seated.

작동 지침

The Inventum MK350 offers options for hot frothing, cold frothing, and heating milk.

1. Prepare the Frother: Ensure the frothing whisk is correctly installed inside the jug.
2. 우유 추가: Pour cold milk into the frother jug. Observe the internal markings for maximum fill levels:
   • 을 위한 거품을 내다 (hot or cold): Do not exceed the 115ml 표시.
   • 을 위한 난방만 (without frothing): Do not exceed the 240ml 표시.

   Note: Using full-fat milk typically yields the best frothing results.
3. 전원 받침대에 놓으십시오: Position the frother jug onto the power base.
4. 기능 선택 :
   • 을 위한 hot frothing or 가열 우유: Press the power button once. The red indicator light will illuminate, and the frother will begin operation.
   • 을 위한 차가운 거품: Press and hold the power button for approximately 2 seconds. The blue indicator light will illuminate, and the frother will begin cold frothing.
5. 작업: The frother will operate for approximately 90 seconds for frothing, or until the milk reaches the optimal temperature for heating, then automatically switch off. The indicator light will turn off.
6. 제공하다: Carefully remove the frother jug from the power base and pour the frothed or heated milk into your beverage.
7. 쿨다운: Allow the frother to cool down for a few minutes between uses to ensure optimal performance and prevent overheating.

유지관리 및 청소

Regular cleaning ensures the longevity and hygiene of your milk frother. Always unplug the appliance before cleaning.

1. 플러그를 뽑고 시원하게 식히세요: Disconnect the power base from the mains outlet and allow the frother jug to cool down completely after use.
2. 털 제거: Carefully remove the frothing whisk from the central pin inside the jug.
3. Clean Frother Jug: 거품기 용기는 손세탁만 가능. Wash the interior of the jug with warm, soapy water and a soft sponge or cloth. The non-stick coating facilitates easy cleaning. Rinse thoroughly and dry immediately. Do not use abrasive cleaners or scouring pads, as these can damage the non-stick surface.
4. Clean Whisk: Wash the frothing whisk with warm, soapy water. Use a small brush if necessary to clean the spring coil. Rinse and dry thoroughly.
5. 깨끗한 외관: 거품기 용기 외부와 전원 받침대를 물로 닦아주세요.amp 천으로 감싸십시오. 전원 받침대를 물에 담그지 마십시오.
6. 저장: Once clean and dry, store the frother with the whisk inside the jug, or in a safe place.

문제 해결

If you encounter issues with your Inventum MK350 Milk Frother, refer to the following common problems and solutions:

• Frother does not start:
  • Ensure the power base is securely plugged into a working electrical outlet.
  • Verify the frother jug is correctly placed on the power base.
  • 전원 버튼을 꼭 누르세요.
• Milk is not frothing or frothing poorly:
  • Check that the frothing whisk is properly installed on the central pin.
  • Ensure the milk level does not exceed the maximum fill line for frothing (115 ml).
  • Use cold, fresh milk. Full-fat milk generally froths better than low-fat or skim milk.
  • Clean the whisk and the interior of the jug thoroughly, as residue can affect performance.
• Milk is not heating:
  • Ensure the milk level does not exceed the maximum fill line for heating (240 ml).
  • Confirm the correct function (hot frothing/heating) was selected.
  • Allow the appliance to cool down if it has been used multiple times in quick succession, as an overheating protection mechanism might be active.
• Indicator lights are not working:
  • Check power connection and ensure the frother is operating. If the frother is working but lights are off, contact customer support.

If the problem persists after attempting these solutions, please contact Inventum customer support or your retailer.

명세서

보증 및 지원

For information regarding the warranty period and conditions for your Inventum MK350 Milk Frother, please refer to the warranty card included with your purchase or consult the retailer from whom you purchased the product. For technical support, spare parts, or service inquiries, please contact Inventum customer service directly or visit their official web연락처 정보 사이트.