소개
This manual provides instructions for the proper installation, operation, and maintenance of the Hager 2500 Series Cylindrical Passage Lock, model 129002. This lock is designed for standard duty commercial applications and is suitable for doors requiring a non-locking function, allowing free passage from either side at all times.
안전 정보
Always wear appropriate safety gear, such as gloves and eye protection, during installation. Ensure all tools are in good working condition. If you are unsure about any step, consult a qualified professional.
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Hager 2500 Series Cylindrical Passage Lock assembly (Withnell Lever Style)
- 래치 메커니즘
- Strike plate (ASA Strike)
- 장착 나사
- Operating keys (two supplied, for specific internal components, not for locking function)
- Installation template (if included with physical product)
설정 및 설치
Follow these steps for proper installation of the Hager 2500 Series Cylindrical Passage Lock.
1. 도어 준비
Ensure your door is prepared with the following standard dimensions:
- 크로스 보어: 2-1/8 inches (54 mm) diameter
- Edge Bore (Latch Hole): 1 inch (25 mm) diameter
- 역수: 2-3/4인치(70mm)
Use the provided template (if applicable) to mark and drill holes accurately. Incorrect drilling can affect lock function and security.
2. Install Latch Mechanism
- Insert the latch mechanism into the edge bore of the door, ensuring the bevel of the latch bolt faces the door frame.
- 제공된 나사를 사용하여 걸쇠를 고정하십시오.
3. Install Lock Chassis
- Align the lock chassis with the cross bore, ensuring the spindle engages with the latch mechanism.
- Insert the exterior and interior lever assemblies.
- Secure the lock chassis with the through-bolts or mounting screws. The design features no exposed mounting screws for a clean appearance.
4. 스트라이크 플레이트를 설치합니다.
- Mark the position for the ASA strike plate on the door frame, aligning it with the latch bolt.
- Chisel out the mortise for the strike plate to sit flush with the door frame.
- Secure the strike plate with the provided screws.
Image 1: Hager 2500 Series Cylindrical Passage Lock, Withnell Lever Style, in Satin Chrome finish. This image shows the complete lever set, including both interior and exterior levers and the cylindrical chassis.
작동 지침
The Hager 2500 Series Cylindrical Passage Lock is designed for non-locking applications. It allows free entry and exit at all times.
- To open the door, simply depress the lever handle on either side.
- Release the lever to allow the latch bolt to extend and secure the door in the closed position.
메모: While two operating keys are supplied, these are typically for internal component access or specific installation adjustments, not for a locking function on a passage set. This lock does not provide security locking.
유지
Regular maintenance ensures the longevity and smooth operation of your lock.
- 청소: 부드러운 천으로 외부 표면을 청소하세요.amp 천으로 닦으십시오. 연마성 세척제나 용제는 마감재를 손상시킬 수 있으므로 사용하지 마십시오.
- 매끄럽게 하기: Periodically apply a small amount of graphite-based lubricant to the latch bolt mechanism if it becomes stiff. Do not use oil-based lubricants, as they can attract dust and debris.
- 점검: Annually inspect all screws and components for tightness. Tighten any loose screws to prevent excessive wear.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 레버가 뻑뻑하거나 돌리기 어렵습니다. | 먼지가 쌓이거나 윤활이 부족합니다. | Clean the mechanism and apply graphite lubricant. |
| 래치 볼트가 완전히 들어가지 않습니다. | Misalignment of lock components or strike plate. | Check alignment of lock chassis and strike plate. Ensure screws are tight. |
| 문을 닫을 때 덜컹거리는 소리가 납니다. | Strike plate not properly aligned or mortised. | Adjust the strike plate position or depth to ensure a snug fit with the latch bolt. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 129002 |
| 시리즈 | 2500 시리즈 |
| 잠금 유형 | Cylindrical Passage Lock (Non-locking) |
| 재료 | Heavy Gauge Steel, Zinc (Handle Material: Zinc) |
| 마치다 | 새틴 크롬 |
| 레버 스타일 | Withnell |
| 역수 | 2-3/4인치(70mm) |
| Door Prep - Cross Bore | 2-1/8 inches (54 mm) diameter |
| Door Prep - Latch Hole (Edge Bore) | 1 inch (25 mm) diameter |
| 손의 방향 | 손이없는 |
| 등급 | Grade 2 (Standard Duty Commercial) |
| 스트라이크 플레이트 | ASA 파업 |
| 포함된 구성 요소 | 2510 WTN US26D (Lock assembly, latch, strike, screws, 2 operating keys) |
보증 정보
Hager products are manufactured to high standards. For specific warranty terms and conditions applicable to the 2500 Series Cylindrical Passage Lock, please refer to the official Hager website or contact Hager customer support directly. Keep your purchase receipt as proof of purchase.
고객 지원
If you require further assistance or have questions regarding your Hager 2500 Series Cylindrical Passage Lock, please contact Hager customer support:
- Web대지: Visit the official Hager web지원 리소스와 연락처 정보를 제공하는 사이트입니다.
- 연락하다: Refer to the packaging or Hager's web전화번호나 이메일 주소를 얻기 위한 사이트.
When contacting support, please have your model number (129002) and purchase details available.