1. 서론
This manual provides essential information for the safe and effective use of your Fluke 117 Digital Multimeter and Fluke 323 True-RMS Clamp Meter combo kit. This kit is designed for residential and commercial electricians, offering productive and effective troubleshooting capabilities.
2. 포함된 구성 요소
Your Fluke 117/323 KIT includes the following items:
- Fluke 117 디지털 멀티미터
- Fluke 323 True-RMS CIamp 미터
- 테스트 리드(빨간색 및 검은색)
- TPAK 마그네틱 걸이 스트랩
- C115 Durable Soft Carrying Case
- 9V Batteries (2 included, pre-installed)
3. 설정
3.1. 배터리 설치
The Fluke 117 and 323 meters come with 9V batteries pre-installed. If replacement is needed, refer to the detailed instructions in the full user manual for safe battery compartment access.
3.2. 테스트 리드 연결
Insert the red test lead into the VΩmA jack and the black test lead into the COM jack for voltage, resistance, and continuity measurements. For current measurements with the Fluke 117, insert the red lead into the 10A FUSED jack and the black lead into the COM jack.
3.3. TPAK Magnetic Hanging Strap Assembly
The TPAK magnetic hanging strap allows for hands-free operation. Attach the strap to the back of your multimeter by sliding it into the designated slot until it clicks securely. The magnetic end can then be used to hang the meter on metal surfaces, pipes, or electrical boxes.
3.4. 키트 오버view 동영상
비디오 1: 이 비디오는 다음을 제공합니다.view of the contents included in the Fluke 117/323 combo kit, demonstrating each component and its basic function.
4. 사용 설명서
4.1. Fluke 117 Digital Multimeter
The Fluke 117 measures AC and DC voltage, as well as AC and DC amps. It features True RMS for accurate measurements on non-linear loads and low input impedance to prevent false readings due to ghost voltage. The VoltAlert™ non-contact voltage detection feature enhances safety by indicating the presence of voltag직접적인 접촉 없이.
4.2. Fluke 323 True-RMS Clamp 미터
플루크 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage. It provides True RMS AC voltage and current for accurate measurements on non-linear signals. Use the clamp jaw to measure AC current by clamping it around a single conductor.
4.3. Multimeter Features Video
Video 2: This video highlights key features and functionalities of the Fluke 117 True-RMS Multimeter, including its automatic AC/DC voltage detection and non-contact voltag전자 경고.
4.4. 클amp Meter Features Video
Video 3: This video details the features of the Fluke 323 Clamp Meter, including its one-handed operation, test lead connections, and AC current measurement capabilities.
5. 유지관리
5.1. 청소
계량기 케이스를 광고용 천으로 닦으세요amp cloth and mild detergent. Do not use abrasives or solvents. Clean the test leads by wiping them with a damp 옷감.
5.2. 배터리 교체
When the battery indicator appears on the display, replace the 9V battery. To replace, open the battery compartment cover on the back of the meter using a screwdriver. Replace with new 9V alkaline batteries, ensuring correct polarity, then secure the cover.
5.3. Test Lead Inspection
Regularly inspect test leads for damaged insulation or exposed metal. Replace damaged leads immediately to ensure safety and accurate measurements.
6. 문제 해결
If your Fluke 117/323 kit is not functioning as expected, consider the following:
- 화면 안 켜짐/배터리 부족: 배터리 잔량을 확인하십시오. 잔량이 부족하면 배터리를 교체하십시오.
- 부정확한 판독: Ensure test leads are properly connected and undamaged. Verify the correct function is selected on the rotary dial. For clamp meter current measurements, ensure the clamp 단일 도체 주변에 있습니다.
- 거짓 볼륨tage Readings (Fluke 117): The low input impedance feature helps prevent ghost voltage readings. If readings are still suspect, ensure proper grounding.
- 연속성 비프음 없음: Check if the continuity function is selected and test leads are making good contact.
For further assistance, refer to the detailed troubleshooting section in the comprehensive user manual or contact Fluke customer support.
7. 사양
| 특징 | 사양 |
|---|---|
| 상표 | 흡충 |
| 모델 번호 | FLUKE-117/323 KIT |
| 전원 | Alkaline (2 x 9V batteries included) |
| 품목 무게 | 1.76파운드(800그램) |
| 제품 치수 | 9 x 30.48 x 3.5 인치 |
| 측정 유형 | 멀티미터, Clamp 미터 |
| 측정 정확도 | 0.5 % + 2 |
| 상한 온도 등급 | 화씨 752도 |
| 안전 등급 | UL, CSA (Canada and US), ANSI/ISA, CAN/CSA, CE, C-Tick, TUV, VDE |
| 용법 | 전문적인 |
8. 보증 정보
The Fluke 117/323 Kit comes with a 2년 보증 on material and workmanship. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty card included in your kit or visit the official Fluke web대지.
9. 고객 지원
For technical assistance, product inquiries, or service requests, please visit the official Fluke website or contact their customer support line. Contact information can typically be found on the Fluke web사이트 또는 제품과 함께 제공된 설명서를 참조하세요.