Schellenberg Mini Standard 20110 Tubular Motor 10 Nm User Manual

1. 서론

This user manual provides detailed instructions for the installation, operation, and maintenance of the Schellenberg Mini Standard 20110 Tubular Motor 10 Nm. This motor is designed for integration into standard roller shutter shafts, offering an efficient and durable solution for controlling roller shutters.

The motor is suitable for controlling shutters from multiple locations or operating multiple shutters simultaneously (group control). It comes ready for assembly with an adapter and wall bracket, and features mechanical end-point adjustment using colored screws.

2. 안전 지침

부상이나 제품 손상을 방지하려면 항상 다음 안전 예방 조치를 준수하세요.

• 설치는 해당 지역의 전기 규정에 따라 자격을 갖춘 전기 기술자가 수행해야 합니다.
• 설치, 유지관리 또는 문제 해결을 수행하기 전에 전원을 분리하세요.
• Ensure the motor is correctly sized for your roller shutter. Refer to specifications for maximum shutter surface area and traction.
• Do not expose the motor to moisture or extreme temperatures beyond its IP44 rating.
• Keep children and pets away from the operating area of the roller shutter.
• 모터를 직접 열거나 수리하려고 하지 마십시오. 자격을 갖춘 서비스 담당자에게 문의하십시오.

3. 상자 안에 무엇이 들어있나요?

포장을 풀 때 모든 구성품이 들어 있는지 확인하세요.

• 1 x Schellenberg Mini Standard 20110 Tubular Motor 10 Nm with cable
• 1 x 어댑터 세트
• 1 x Wall bearing

Figure 3.1: Contents of the product package, showing the tubular motor, adapter set, and wall bearing components.

4. 설정 및 설치

The Schellenberg Mini Standard 20110 Tubular Motor is designed for direct mounting within a 60 mm octagonal roller shutter shaft.

4.1. 설치 전 점검 사항

• Ensure the roller shutter shaft is clean and free of obstructions.
• Verify the shaft diameter is 60 mm.
• Confirm the power supply is disconnected before beginning installation.

4.2. Motor Preparation

Attach the appropriate adapter from the adapter set to the motor head. The adapter ensures optimal power transfer to the shaft.

Figure 4.1: End of the tubular motor with the adjustment points for setting limits.

4.3. 모터 장착

1. Insert the prepared motor into the 60 mm octag하나의 샤프트.
2. Secure the motor within the shaft using the provided wall bearing.
3. Ensure the motor is firmly seated and aligned correctly.

Figure 4.2: The tubular motor positioned inside a roller shutter shaft, ready for final adjustments.

4.4. 전기적 연결

Connect the motor to the power supply according to the wiring diagram provided in the full installation guide (not included in this manual, refer to product packaging or manufacturer's website for detailed wiring instructions). Ensure all connections are secure and insulated.

4.5. End-Point Adjustment

The motor features mechanical end-point adjustment using colored screws (yellow and white) located on the motor head. These screws allow you to set the upper and lower limits of the roller shutter's travel.

1. 모터에 전원을 공급합니다.
2. Use a suitable tool (e.g., the provided adjustment tool) to turn the colored screws.
3. Turn the yellow screw to adjust one end point (e.g., fully open).
4. Turn the white screw to adjust the other end point (e.g., fully closed).
5. Test the travel of the roller shutter to ensure the limits are set correctly and the shutter stops precisely at the desired positions.

Figure 4.3: Adjusting the mechanical end points of the tubular motor using the provided tool.

5. 모터 작동

Once installed and the end points are set, the motor can be operated via a connected switch or control system (not included). The motor operates in an ON-OFF-ON mode.

• 상향 이동: Activate the 'Up' control. The motor will run until the upper end point is reached or the control is released.
• 하향 이동: Activate the 'Down' control. The motor will run until the lower end point is reached or the control is released.
• 중지: Release the control or activate the 'Stop' function if available on your control system.

For multi-location or group control, ensure your control system is compatible with tubular motors and wired correctly.

6. 유지관리

The Schellenberg Mini Standard 20110 Tubular Motor is designed for minimal maintenance. However, regular checks can ensure optimal performance and longevity.

• 연례 검사: Periodically check the roller shutter for smooth operation. Ensure there are no obstructions in the path of the shutter.
• 청소: Keep the area around the motor and shaft clean from dust and debris. Do not use abrasive cleaners or solvents.
• 전기 연결: Annually inspect electrical connections for any signs of wear or loosening. Ensure power is disconnected before inspection.
• 매끄럽게 하기: 모터는 공장에서 윤활 처리가 되어 있어 추가 윤활이 필요하지 않습니다.

If you notice any unusual noises, erratic operation, or failure to respond, refer to the Troubleshooting section or contact customer support.

7. 문제 해결

This section addresses common issues you might encounter with your tubular motor.

If the problem persists after attempting these solutions, please contact Schellenberg customer support.

8. 사양

Detailed technical specifications for the Schellenberg Mini Standard 20110 Tubular Motor:

• 모델 번호: 20110
• 토크: 10Nm(XNUMXNm)
• Maximum Traction: 25kg
• Maximum Shutter Surface Area: 6.0 제곱미터
• 작동 모드: 켜짐-꺼짐-켜짐
• 운영 볼륨tage: 230 볼트
• 현재 평가: 0.53 Amps
• End Point Adjustment: Mechanical, color adjustment (yellow and white screws)
• 샤프트 호환성: 60 mm octagonal shafts
• 제품 크기: 22.83 x 4.13 x 2.95인치(58 x 10.5 x 7.5cm)
• 품목 무게: 4.45파운드(2.02kg)
• 국제 보호 등급: IP44 (Protection against solid objects over 1mm and splashing water from any direction)
• 연락 재질 : 구리
• 제조업체: 알프레드 셸렌베르크 GmbH
• 첫 번째 가능한 날짜: 15년 2013월 XNUMX일

Figure 8.1: Dimensions of the Schellenberg Mini Standard 20110 Tubular Motor.

9. 보증 및 지원

Schellenberg products are manufactured to high quality standards. For warranty information, please refer to the documentation included with your purchase or visit the official Schellenberg website. The manufacturer is Alfred Schellenberg GmbH.

For technical support, troubleshooting assistance beyond this manual, or spare parts, please contact Schellenberg customer service. Contact details can typically be found on the manufacturer's web사이트 또는 제품 포장.

제조업체: 알프레드 셸렌베르크 GmbH

Web대지: www.schellenberg.de (참고: 이것은 일반적인 예시입니다.)amp르, 실제 web(사이트는 지역에 따라 다를 수 있습니다.)