Jebao JGP25000 6000GPH Water Pond Pump Instruction Manual
소개
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Jebao JGP25000 Water Pond Pump. Designed for versatility, this pump is suitable for various water features, including medium to large ponds and waterfalls. Please read these instructions thoroughly before use to ensure proper function and longevity of the product.
중요한 안전 정보
Please observe the following safety precautions to prevent injury or damage to the pump.
경고: 감전 위험
Connect the pump only to a properly grounded, grounding-type receptacle.
펌프는 누전 차단기(GFCI)로 보호되는 회로에만 설치하십시오.
이 펌프는 수영장이나 해양 환경에서의 사용 적합성에 대한 검증을 거치지 않았습니다. 이러한 환경에서는 사용하지 마십시오.
주의:
이 펌프는 물에서만 사용하도록 설계되었습니다.
DO NOT RUN DRY: Operating the pump without water can cause severe damage and void the warranty.
Ensure water temperature does not exceed 96°F (35.5°C).
제품 끝view
The Jebao JGP25000 is a high-performance water feature pump engineered for reliability and ease of use. It features a robust design suitable for continuous operation in various water garden applications.
주요 특징:
다양한 작업: Designed for both submersible and in-line use.
유연한 설치: Capable of vertical or horizontal operation, ideal for skimmers.
내구성 있는 구성 요소: Features wear-resistant ceramic bearings and shaft for extended life.
Large Pre-filter: Reduces the frequency of cleaning by handling solids up to 3/4" diameter.
열 과부하 보호: Enhances safety and pump longevity.
쉬운 유지관리: Quick and tool-free disassembly for cleaning.
긴 전원 코드: Equipped with a 33 ft. power cord for flexible placement.
Image: The Jebao JGP25000 Water Pond Pump, showing its compact black housing, threaded outlet, and power cord connection. This image provides a general view of the pump's design.
설치 지침
1. 개봉 및 검사
Carefully remove the pump from its packaging.
운송 중 펌프에 손상 흔적이 있는지 확인하십시오. 손상된 경우 사용하지 마십시오.
모든 구성 요소가 있는지 확인하세요.
2. 배치 옵션
The JGP25000 pump offers flexible installation:
Submersible Installation: Place the pump directly into the pond or water feature. Ensure it is fully submerged and rests on a stable, level surface.
인라인 설치: The pump can be installed outside the water feature, connected via appropriate plumbing.
정위: The pump can be positioned vertically or horizontally, accommodating various setups, including skimmers.
3. 배관 연결
Attach appropriate tubing or piping to the pump's outlet. Ensure all connections are secure and watertight to prevent leaks.
호스 cl 사용amps or thread sealant as necessary for a tight seal.
4. 전기적 연결
Before connecting to power, ensure the pump is correctly installed and submerged (if applicable).
Plug the 33 ft. power cord into a properly grounded, GFCI-protected electrical outlet.
Avoid using extension cords if possible. If an extension cord is necessary, ensure it is rated for outdoor use and capable of handling the pump's wattage(520와트).
작동 지침
1. 초기 시작
Ensure the pump is fully submerged in water or primed if used in an in-line setup. 펌프를 건조하게 작동하지 마십시오.
Connect the pump to the power supply. The pump should start immediately.
Check for proper water flow and any unusual noises.
2. 연속 운전
The Jebao JGP25000 is designed for continuous operation. Monitor water levels regularly to ensure the pump remains submerged and to prevent dry running.
3. 종료
펌프를 끄려면 전원 공급 장치에서 플러그를 뽑기만 하면 됩니다.
For extended periods of non-use, especially during freezing temperatures, remove the pump from the water, clean it, and store it in a dry, frost-free location.
유지
Regular maintenance ensures optimal performance and extends the life of your pump. The JGP25000 is designed for easy, tool-free disassembly for cleaning.
1. 프리필터 청소
유지보수를 하기 전에 펌프의 전원을 차단하십시오.
Remove the pump from the water or its in-line setup.
Disassemble the pre-filter housing (typically by unlatching or unscrewing components by hand).
Rinse the pre-filter and impeller chamber thoroughly with clean water to remove debris, algae, and sediment.
Inspect the impeller for any blockages or damage.
펌프를 다시 조립하고 모든 부품이 단단히 고정되었는지 확인하십시오.
2. 동절기 준비
Before freezing temperatures arrive, remove the pump from the water.
위에서 설명한 대로 펌프를 철저히 청소하십시오.
Store the pump in a dry, frost-free location to prevent damage from ice expansion.
문제 해결
문제
가능한 원인
해결책
Pump does not start or runs intermittently.
No power; GFCI tripped; Impeller jammed; Thermal overload activated.
Check power connection and GFCI. Disconnect power, clean impeller chamber. Allow pump to cool if thermal overload tripped.
물 흐름 감소.
Clogged pre-filter or impeller; Kinked tubing; Low water level.
Disconnect power, clean pre-filter and impeller. Check tubing for obstructions. Ensure adequate water level.
과도한 소음 또는 진동.
Debris in impeller; Pump not stable; Worn bearings.
Disconnect power, clean impeller. Ensure pump is on a stable surface. If noise persists, contact support.
Pump runs dry.
수위가 부족합니다.
Immediately disconnect power. Refill water feature. Inspect pump for damage before restarting.
If troubleshooting steps do not resolve the issue, please contact Jebao customer support.
기술 사양
모델 번호
JGP25000
최대 유량
6,000 GPH(시간당 갤런)
최대 헤드 높이
25 피트
왓tage
520 와트
권tage
110V
전원
AC(교류)
전원 코드 길이
33 피트
Max Solids Handling
Up to 3/4" diameter
최대 수온
화씨 96도(섭씨 35.5도)
품목 무게
12 파운드
스타일
수중/인라인
보증 및 지원
제조업체 보증
The Jebao JGP25000 Water Pond Pump is backed by a 1년 제조사 보증 구매일로부터. 본 보증은 정상적인 사용 중 발생하는 재료 및 제조상의 결함에 적용됩니다. 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오.
The warranty does not cover damage caused by misuse, improper installation, running the pump dry, freezing, or unauthorized modifications.
고객 지원
For technical assistance, warranty inquiries, or replacement parts, please contact Jebao customer support:
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.