KanexPro Adjustable Tilt Wall Mount Instruction Manual

소개

This manual provides comprehensive instructions for the safe and proper installation and operation of your KanexPro Adjustable Tilt Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. This high-quality tilting wall mount bracket is designed for compatible televisions, offering a secure and adjustable view경험.

안전 정보

경고: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.

• 구조적으로 불안정한 벽에는 이 제품을 설치하지 마십시오. 설치 표면이 마운트와 디스플레이의 총 무게를 안전하게 지탱할 수 있는지 확인하십시오.
• Always use a stud finder to locate wooden studs. If mounting to concrete, ensure appropriate anchors are used.
• 최대 중량 용량은 165파운드(75kg)를 초과하지 마십시오.
• This mount is designed for indoor use only.
• 작은 부품은 어린이의 손이 닿지 않는 곳에 보관하세요.
• 부상이나 손상을 방지하기 위해 설치 시에는 항상 최소 두 명 이상이 함께 작업해야 합니다.

패키지 내용

Please verify that all components are present and undamaged before installation. If any parts are missing or defective, contact KanexPro customer support.

• 벽판 조립체
• TV 브래킷 암 (2)
• 장착 하드웨어 키트(다양한 나사, 와셔, 스페이서, 앵커)
• 설치 지침(본 설명서)

Image: The main components of the KanexPro wall mount, showing the wall plate and two vertical TV bracket arms.

설정 및 설치

필요한 도구 (포함되지 않음): Pencil, Drill, Phillips Head Screwdriver, Level, Stud Finder, Measuring Tape, Hammer (for concrete anchors).

1단계: TV 브래킷을 TV에 부착

1. 화면 손상을 방지하려면 부드럽고 깨끗한 표면에 TV를 뒤집어서 조심스럽게 놓으세요.
2. TV 뒷면에 있는 VESA 장착 구멍을 확인하세요.
3. TV 장착 구멍에 맞는 나사, 와셔, 스페이서를 하드웨어 키트에서 선택하십시오.
4. Attach the two TV bracket arms to the back of your TV, ensuring they are vertically aligned and securely fastened. The hooks on the bracket arms should face downwards.

2단계: 벽면 플레이트를 벽에 장착합니다.

1. Determine the desired height for your TV. Hold the wall plate against the wall and mark the top and bottom center points.
2. Use a stud finder to locate two adjacent wooden studs. Mark the center of each stud. The wall plate is designed to span two studs.
3. Position the wall plate against the wall, aligning the mounting holes with the marked stud centers. Use a level to ensure the wall plate is perfectly horizontal.
4. Mark the drill points through the holes on the wall plate.
5. Drill pilot holes at the marked locations. For wood studs, use a smaller drill bit than the lag bolts. For concrete, use a masonry drill bit and insert concrete anchors.
6. Secure the wall plate to the wall using the provided lag bolts and washers. Tighten firmly, but do not overtighten.

Image: Technical diagram illustrating the VESA compatibility ranges (min/max) for both horizontal and vertical dimensions, along with the overall measurements of the wall plate (32" wide x 8 7/8" high).

3단계: 벽걸이 플레이트에 TV를 걸기

1. 다른 사람의 도움을 받아 부착된 브래킷을 이용해 TV를 조심스럽게 들어 올리십시오.
2. Align the hooks on the TV bracket arms with the top edge of the wall plate.
3. TV를 천천히 내려놓고, 고리가 벽면 고정판에 제대로 걸렸는지 확인하십시오.
4. Once the TV is hanging, locate the safety screws or locking mechanisms on the bottom of the TV bracket arms. Tighten these to secure the TV to the wall plate and prevent accidental dislodging.
5. Verify that the TV is level and securely mounted.

이미지: 각도가 있는 view of the KanexPro wall mount, highlighting the robust construction and the tilting mechanism on the bracket arms.

틸트 기능 작동

This wall mount features a variable downward tilt from 0° to -15°.

1. To adjust the tilt, locate the tilt adjustment knobs or bolts on the side of each TV bracket arm.
2. Loosen these knobs/bolts slightly.
3. Carefully tilt the bottom of your TV forward or backward to achieve the desired view잉 각도.
4. Once the desired angle is set, firmly tighten the tilt adjustment knobs/bolts to secure the TV in place.

유지

정기적인 유지관리를 통해 벽걸이 거치대의 수명과 안전한 작동을 보장할 수 있습니다.

• 청소: 부드럽고 마른 천으로 마운트를 닦으세요. 연마성 세제나 용제를 사용하지 마세요.
• 정기 점검: Periodically check all screws and bolts to ensure they remain tight and secure. Retighten if necessary.
• 손상: If any part of the mount appears damaged or worn, do not use it. Contact KanexPro for replacement parts or professional assistance.

문제 해결

명세서

• 모델 번호: K-WALLM-14-BLK-0847
• 장착 유형: 벽걸이형
• 이동 유형: 경사
• 재료: 합금강
• 색상: Black scratch resistant finish
• 최대 중량 용량: 165파운드(75kg)
• Tilt Feature: 0° to -15° Degrees (Variable Downward Tilt)
• Maximum Compatible TV Size: 51 인치
• 호환 장치: 텔레비전
• 품목 무게: 13파운드(약 5.9kg)

보증 및 지원

For warranty information and customer support, please refer to the KanexPro official website or contact their customer service department directly. Please have your model number (K-WALLM-14-BLK-0847) and purchase details ready when contacting support.

제조업체: 카넥스프로