STRONG SRT ANT 45 ECO Digital Active DVB-T/T2 Outdoor Antenna

1. 서론

This manual provides comprehensive instructions for the installation, operation, and maintenance of your STRONG SRT ANT 45 ECO Digital Active DVB-T/T2 Outdoor Antenna. This antenna is designed for optimal reception of digital terrestrial television (DVB-T/T2) signals, featuring an integrated FM signal filter and an LTE filter to minimize interference. It is HDTV ready, supports both UHF and VHF frequencies, and is built to be waterproof and UV resistant for outdoor durability.

그림 1.1: 전면 view of the STRONG SRT ANT 45 ECO Outdoor Antenna.

2. 안전 정보

Please read all safety instructions carefully before installing or operating the antenna. Failure to do so may result in injury or damage to the product.

• 설치 안전: Always exercise caution when working at heights. Ensure the mounting location is stable and secure. Avoid installing near power lines or other electrical hazards.
• 날씨 조건: Do not install or adjust the antenna during thunderstorms or strong winds.
• 전원 공급 장치: Use only the provided power adapter. Ensure the power supply is disconnected before making any connections.
• 방수 기능: While the antenna is waterproof, ensure all cable connections are properly sealed to prevent water ingress into the coaxial cable or connected devices.
• 어린이들: 포장재와 작은 부품은 어린이의 손이 닿지 않는 곳에 보관하세요.

3. 패키지 내용

Carefully unpack the box and ensure all items listed below are present and undamaged. If any items are missing or damaged, please contact your retailer.

그림 3.1: 포함된 구성품 및 액세서리.

• STRONG SRT ANT 45 ECO Outdoor Antenna
• Mounting bracket and hardware (screws, wall plugs, U-bolt for pole mounting)
• Power inserter / Amp리퍼 유닛
• 전원 어댑터(DC 12V)
• Coaxial cable (approx. 3 meters)
• 사용 설명서

4. 설정 및 설치

The SRT ANT 45 ECO antenna is designed for outdoor use and can be mounted on a wall or a pole. Choose a location that provides a clear line of sight to the broadcasting tower, free from obstructions like buildings or trees.

4.1. 위치 선택

Identify the direction of your local DVB-T/T2 broadcasting tower. Online resources or local TV station websites can provide this information. The antenna should be mounted as high as possible and away from large metal objects that could interfere with the signal.

4.2. 안테나 장착

The antenna can be mounted using the provided wall mount or pole mount hardware.

1. 벽면 장착:
   • Mark the drilling points for the wall bracket.
   • 구멍을 뚫고 벽면 플러그를 꽂습니다.
   • 나사를 사용하여 브래킷을 벽에 고정하십시오.
   • Attach the antenna to the bracket, ensuring it is firmly secured.
2. 극 장착:
   • Attach the U-bolt and clamps to the antenna mounting point.
   • Position the antenna on the pole and tighten the nuts on the U-bolt to secure it firmly.

4.3. 안테나 연결

1. Connect one end of the coaxial cable to the F-connector on the antenna. Ensure the connection is tight and waterproof.
2. Connect the other end of the coaxial cable to the "ANT IN" port of the power inserter/amp리퍼 유닛.
3. Connect another coaxial cable (not always included, may need to be purchased separately) from the "TO TV/RECEIVER" port of the power inserter to the antenna input (ANT IN / RF IN) on your DVB-T/T2 receiver or television.
4. Plug the power adapter into the power inserter unit and then into a wall outlet. The power inserter provides the necessary 12V DC power to the active antenna.

The integrated FM signal filter and LTE filter work automatically to reduce interference from FM radio signals and 4G/5G mobile networks, ensuring a clearer DVB-T/T2 signal.

5. 사용 설명서

Once the antenna is installed and connected, you can proceed with scanning for channels on your DVB-T/T2 receiver or television.

1. Turn on your DVB-T/T2 receiver or television.
2. Navigate to the "Channel Scan" or "Auto Tune" menu option. Refer to your receiver's or TV's manual for specific instructions.
3. Initiate the channel scan. The receiver will search for available digital terrestrial channels.
4. During the scan, you may need to slightly adjust the antenna's direction to achieve the best signal strength and quality. Use the signal meter on your receiver/TV as a guide.
5. Once the scan is complete, save the found channels.

For optimal performance, periodically check for new channels as broadcasting frequencies may change.

6. 유지관리

The STRONG SRT ANT 45 ECO antenna is designed for low maintenance due to its durable, waterproof, and UV-resistant housing.

• 청소: If the antenna becomes dirty, gently wipe it with a soft, damp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
• 점검: 특히 악천후 이후에는 안테나와 장착 하드웨어에 마모, 부식 또는 풀림 현상이 있는지 주기적으로 점검하십시오.
• 케이블 연결: Ensure all coaxial cable connections remain tight and sealed to prevent moisture ingress.

7. 문제 해결

안테나에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

8. 사양

Technical specifications for the STRONG SRT ANT 45 ECO Digital Active DVB-T/T2 Outdoor Antenna:

9. 보증 및 지원

STRONG products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official STRONG web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

For technical support or further assistance, please visit the official STRONG web해당 웹사이트를 방문하거나 고객 서비스 부서에 문의하십시오. 연락처 정보는 일반적으로 제품 포장이나 제조업체의 안내문에 나와 있습니다. web대지.

Visit Strong Official Web대지