Sanitas SGS03 Pure White Glass Bathroom Scales User Manual

1. 서론

The Sanitas SGS03 is a modern digital bathroom scale designed for accurate body weight measurement. It features a pure white safety glass platform and a slim-line profile. The large 40mm LCD display is backlit in blue for enhanced visibility. This scale offers easy switching between metric (kilograms) and imperial (stones, pounds) units. It is equipped with an automatic on/off function via a vibration sensor to conserve battery life. The scale can measure weights up to 150 kilograms with 100-gram increments.

Image 1.1: Sanitas SGS03 Pure White Glass Bathroom Scale showing a weight reading.

2. 설정

2.1. 배터리 설치

The scale typically comes with batteries included. Before first use, locate the battery compartment on the underside of the scale. Remove any protective film or tab from the batteries to activate them. Ensure batteries are inserted with the correct polarity (+/-) as indicated inside the compartment.

2.2. 초기 배치

Place the scale on a firm, flat surface. Uneven or soft surfaces (like carpet) can affect accuracy. Avoid placing the scale near heat sources or in direct sunlight.

2.3. Unit Selection (kg/st/lb)

To switch between measurement units (kilograms, stones, or pounds), locate the unit switch button on the underside of the scale, usually near the battery compartment. Press this button to cycle through the available units until your desired unit is displayed on the screen.

3. 사용 설명서

3.1. 측정하기

1. 저울이 평평하고 안정된 표면에 놓여 있는지 확인하세요.
2. Gently step onto the scale. The scale will automatically turn on due to its vibration sensor.
3. Stand still with your weight evenly distributed until the display shows a stable reading.
4. Step off the scale. The reading will typically hold for a few seconds before the scale automatically shuts off to conserve power.

이미지 3.1: 클로즈업 view of the digital LCD display showing a weight in kilograms.

4. 유지관리

4.1. 청소

저울의 유리 표면을 물로 깨끗이 닦으세요.amp cloth and a mild detergent if necessary. Do not use abrasive cleaners or immerse the scale in water. Dry thoroughly after cleaning.

4.2. 배터리 교체

When the display shows a 'Lo' indicator, it is time to replace the batteries. Open the battery compartment on the underside of the scale, remove the old batteries, and insert new ones of the same type, ensuring correct polarity. Dispose of old batteries responsibly.

4.3. 보관

저울은 서늘하고 건조한 곳에 보관하십시오. 전자 부품에 영향을 줄 수 있는 극한 온도나 높은 습도를 피하십시오.

5. 문제 해결

• No Display / 'Lo': Replace batteries. Ensure they are inserted correctly.
• 'Err' / Overload: The maximum weight capacity of 150 kg has been exceeded. Step off the scale immediately.
• 부정확한 판독:
  • 저울이 단단하고 평평하며 수평인 표면에 놓여 있는지 확인하십시오.
  • 체중계에 천천히 올라서서 가만히 서 계세요.
  • 발이 깨끗하고 건조한지 확인하세요.
  • 측정 사이에 저울을 움직이지 마십시오.
  • Recalibrate by stepping on and off the scale quickly, then wait for it to turn off before taking a measurement.
• 디스플레이가 깜박입니다: This may indicate an unstable reading. Stand still until the reading stabilizes.

6. 사양

이미지 6.1: 클로즈업 view of the safety glass edge of the scale, highlighting its material and slim design.

7. 보증

The Sanitas SGS03 Pure White Glass Bathroom Scales come with a 3-year guarantee from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for any warranty claims. For further details or to initiate a claim, please contact Sanitas customer support.

8. 고객 지원

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please refer to the contact information provided with your product packaging or visit the official Sanitas website. When contacting support, please have your model number (755.18) and proof of purchase readily available.