Konica Minolta BizHub C280 Color Drum

코니카미놀타 비즈허브 C280 컬러 드럼 사용 설명서

Model: BizHub C280 Color Drum

Part Number: DR311 (Yellow, Magenta, Cyan)

1. 서론

This manual provides essential instructions for the proper installation, operation, and maintenance of your Konica Minolta BizHub C280 Color Drum. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

2. 제품 오버view

The Konica Minolta BizHub C280 Color Drum is an Original Equipment Manufacturer (OEM) component designed for use with the Konica Minolta BizHub C280 laser printer. This drum unit is crucial for transferring toner to paper, enabling high-quality color prints. It has an estimated yield of 55,000 pages at 5% coverage.

Konica Minolta DR311 Color Drum Unit in its packaging

Image of the Konica Minolta DR311 Color Drum unit, still sealed in its original cardboard packaging. The packaging displays the Konica Minolta logo, model number DR311, and indications for Yellow, Magenta, and Cyan colors.

3. 설정 및 설치

3.1 안전 예방 조치

  • Turn off and unplug the printer before installation.
  • Avoid touching the drum surface directly with bare hands. Fingerprints can degrade print quality.
  • Keep the drum unit away from direct light to prevent damage.
  • Handle with care to avoid dropping or impacting the unit.

3.2 설치 단계

  1. Open the front cover of your Konica Minolta BizHub C280 printer.
  2. Locate the used drum unit.
  3. Carefully remove the old drum unit by pulling it out. Place it in a protective bag for proper disposal.
  4. Unpack the new Konica Minolta BizHub C280 Color Drum from its protective packaging.
  5. Remove any protective covers or seals from the new drum unit.
  6. Align the new drum unit with the guides in the printer.
  7. Gently push the new drum unit into place until it clicks securely.
  8. 프린터의 전면 덮개를 닫습니다.
  9. Plug in and power on the printer. The printer may perform a calibration cycle automatically.

4. Operating the Drum Unit

The drum unit operates automatically as part of the printing process. Once installed, the printer's internal systems will manage its function. No direct user operation is required for the drum unit itself. The printer will indicate when the drum unit needs replacement based on its page yield or detected wear.

5. 유지관리

To ensure the best print quality and extend the life of your drum unit:

  • Use only genuine Konica Minolta toner cartridges with your printer.
  • Avoid exposing the drum unit to extreme temperatures or humidity during storage or handling.
  • If print quality issues arise, consult your printer's main user manual for cleaning procedures or diagnostic steps related to the drum unit. Do not attempt to clean the drum surface with abrasive materials.

6. 문제 해결

6.1 Poor Print Quality (streaks, spots, faded prints)

  • 설치 확인: Ensure the drum unit is correctly installed and fully seated in the printer.
  • 토너 레벨: Verify that toner cartridges are not empty or low.
  • Drum Life: The drum unit may be nearing the end of its estimated life cycle (55,000 pages). Replace if necessary.
  • 프린터 설정: Consult your printer's main user manual for specific error codes or diagnostic tools related to print quality.

6.2 Drum Unit Error Message

  • Reseat Drum: Verify the drum unit is properly seated. Remove and reinsert it firmly.
  • 전원 주기: Power cycle the printer (turn off, wait 30 seconds, then turn on).
  • 대사: If the error persists, the drum unit may be faulty or at the end of its service life and requires replacement.

7. 사양

  • 모델: Konica Minolta BizHub C280 Color Drum
  • 부품 번호: DR311 (Yellow, Magenta, Cyan)
  • 예상 페이지 출력량: 55,000 pages (at 5% coverage)
  • 호환성: Konica Minolta BizHub C280 Laser Printer
  • 유형: 원래 장비 제조업체(OEM)

8. 보증 및 지원

This Konica Minolta OEM product is typically covered by the manufacturer's standard warranty. For specific warranty terms, conditions, and technical support, please refer to the official Konica Minolta web사이트에서 확인하거나 고객 서비스에 직접 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.