Brookstone BK798314 Grill Alert Talking Remote Meat Thermometer User Manual

소개

The Brookstone BK798314 Grill Alert Talking Remote Meat Thermometer is designed to help you achieve perfectly cooked meats by monitoring internal temperatures wirelessly. This device features a remote receiver that provides real-time temperature updates and audible alerts, allowing you to monitor your cooking from up to 300 feet away. Please read this manual thoroughly to ensure proper use and care of your thermometer.

패키지 내용

패키지에 모든 구성품이 들어 있는지 확인하세요.

• Wireless Transmitter Unit
• Remote Receiver Unit
• Stainless Steel Meat Probe
• 사용 설명서 (본 문서)

영상: The Brookstone Grill Alert Talking Remote Meat Thermometer includes a wireless transmitter, a receiver unit, and a meat probe.

설정

1. 배터리 설치

Both the transmitter and receiver units require batteries (typically AAA, not always included).

1. 송신기와 수신기 뒷면에 있는 배터리함을 찾으십시오.
2. 구획 덮개를 엽니다.
3. 필요한 배터리를 삽입할 때 극성(+/-)을 정확히 확인하십시오.
4. 배터리 덮개를 단단히 닫으세요.

2. 프로브 연결

Connect the stainless steel meat probe to the designated port on the transmitter unit. Ensure the connection is firm.

3. 초기 페어링 (필요한 경우)

Most units automatically pair when powered on. If your units do not connect, refer to the following steps:

• 송신기와 수신기 모두에 새 배터리가 장착되어 있고 전원이 켜져 있는지 확인하십시오.
• Place the transmitter and receiver close to each other (within 3 feet).
• Press and hold the "Pair" button (if available) on both units simultaneously for a few seconds until a connection is established. The receiver display should show a signal indicator.

작동 지침

1. 전원 켜기 / 끄기

를 누르세요 힘 button on the receiver unit to turn it on or off. The transmitter unit typically powers on automatically when the probe is connected and batteries are inserted.

영상: The receiver unit's display shows the selected meat type, desired doneness, target temperature, and current temperature. Buttons for 'Select', 'Cook', and 'Power' are visible below the screen.

2. 고기 종류 및 익힘 정도 선택

The receiver unit allows you to choose from various pre-programmed meat types and desired doneness levels.

1. 를 누르세요 선택하다 button to cycle through available meat types (e.g., Beef, Poultry, Pork, Fish, Turkey).
2. Once the desired meat type is displayed, press the 요리하다 button to cycle through doneness levels (e.g., Rare, Medium Rare, Medium, Well Done). The target temperature will adjust automatically based on your selection.
3. The display will show the selected meat type, doneness, and the corresponding target temperature.

3. Setting Custom Temperatures (if applicable)

Some models allow for custom temperature settings. Consult your specific model's instructions for this feature.

4. 프로브 삽입

Carefully insert the stainless steel probe into the thickest part of the meat, avoiding bone or gristle. Ensure the probe tip is fully embedded for an accurate reading.

5. Monitoring Temperature and Alerts

Place the transmitter unit near your grill or oven, ensuring it is within range of the receiver (up to 300 feet). The receiver will display the current internal temperature of the meat.

• As the meat cooks, the receiver will update the current temperature.
• When the temperature approaches the target, the unit will provide an audible "food almost ready" alert.
• Once the target temperature is reached, the unit will announce "food is done" and may emit a continuous alarm.
• Remove the meat from the heat source immediately when the "food is done" alert sounds.

유지 보수 및 관리

• 프로브 청소: After each use, carefully clean the stainless steel probe with warm, soapy water. Rinse thoroughly and dry completely. Do not immerse the probe cable or connector in water.
• 청소 장치: Wipe the transmitter and receiver units with a damp cloth. Do not immerse either unit in water or expose them to excessive moisture.
• 저장: 온도계를 사용하지 않을 때는 건조하고 서늘한 곳에 보관하십시오.
• 배터리 교체: Replace batteries when the display dims or the unit fails to power on. Remove batteries if storing the unit for extended periods to prevent leakage.

문제 해결

No temperature reading or "---" on display:

• Ensure the probe is securely plugged into the transmitter.
• Check if the probe is damaged. A faulty probe may need replacement.
• Verify that the transmitter and receiver are powered on and within range.
• 두 장치의 배터리를 모두 교체하세요.

No signal or connection between units:

• Ensure both units have fresh batteries and are powered on.
• 수신기를 송신기에 더 가깝게 이동하십시오.
• Avoid placing the transmitter near large metal objects or strong electromagnetic interference sources.
• Attempt to re-pair the units if your model supports manual pairing.

부정확한 온도 측정:

• Ensure the probe is inserted into the thickest part of the meat, away from bone or gristle.
• Verify that the selected meat type and doneness are correct for your cooking.
• Test the probe in boiling water (should read approximately 212°F / 100°C) or ice water (should read approximately 32°F / 0°C) to check its accuracy.

명세서

• 모델: BK798314
• 연결성: Bluetooth (Wireless range up to 300 ft)
• 디스플레이 유형: 디지털
• 특별 기능: Remote, Talking Alerts
• 프로브 재료: 스테인리스 스틸
• 전원: 배터리 구동
• 관리 지침: Wipe Clean (probe hand wash only)
• 치수: 약 10.7 x 8.9 x 3.4인치(패키지)
• 무게: 약 1.4파운드

보증 및 지원

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Brookstone web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.