TC Electronic Flashback X4 Guitar Delay Effects Pedal User Manual

소개

The TC Electronic Flashback X4 is a versatile guitar delay effects pedal designed to provide a wide range of delay types, looping capabilities, and advanced tone-shaping options. This manual will guide you through its features, setup, and operation to help you get the most out of your pedal.

안전 정보

• 본 제품을 비나 습기에 노출시키지 마십시오.
• Do not use near heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
• 제조사가 지정한 부속품/액세서리만 사용하세요.
• 모든 서비스는 자격을 갖춘 서비스 담당자에게 의뢰하세요.

패키지 내용

Ensure all items are present in your Flashback X4 package:

• TC Electronic Flashback X4 Delay Effects Pedal
• Power Supply (9V DC, 300mA)
• USB 케이블
• 사용 설명서 (본 문서)

제어 및 연결

The Flashback X4 features a comprehensive set of controls and input/output options for maximum flexibility.

상단 패널 컨트롤

이미지 설명: 위에서 내려다본 모습 view of the blue TC Electronic Flashback X4 pedal, showing five black rotary knobs and four footswitches. The knobs are labeled "TONEPRINT", "DELAY TIME", "FEEDBACK", "DELAY LEVEL", and "LOOPER LEVEL". The footswitches are labeled "REC (A)", "PLAY/PAUSE (B)", "ONCE (C)", and "UNDO/REDO (TAP)".

• TONEPRINT Knob: Selects between 16 delay types including Tape, Tube, Space, Analog, Analog w/Mod, Reverse, Dynamic, 2290, 2290 w/Mod, Slap, LoFi, Ping Pong, and three TonePrint slots.
• DELAY TIME Knob: 지연 시간을 조정합니다.
• 피드백 노브: 지연 반복 횟수를 제어합니다.
• DELAY LEVEL Knob: 지연된 신호의 볼륨을 설정합니다.
• LOOPER LEVEL Knob: Adjusts the volume of the looper playback.
• REC (A) Footswitch: Engages/disengages recording for the looper.
• PLAY/PAUSE (B) Footswitch: Starts/pauses looper playback.
• ONCE (C) Footswitch: Plays the loop once.
• UNDO/REDO (TAP) Footswitch: Tap tempo functionality and undo/redo for looper.

후면 패널 연결

Image description: A rear view of the blue TC Electronic Flashback X4 pedal, showing various input and output jacks. From left to right: Mono/Stereo Input jacks, Mono/Stereo Output jacks, EXP Pedal input, 9V DC power input, USB port, MIDI IN, and MIDI THRU ports.

• INPUT (MONO/STEREO): Connect your guitar or other audio source. Supports mono or stereo input.
• OUTPUT (MONO/STEREO): 당신에게 연결 amplifier or other audio equipment. Supports mono or stereo output.
• EXP PEDAL: Connect an expression pedal for real-time control over parameters.
• 9V DC/300mA: 동봉된 전원 공급 장치의 전원 입력부입니다.
• USB: Connect to a computer for TonePrint editing and firmware updates.
• MIDI 입력/출력: MIDI connectivity for advanced control and synchronization.
• BYPASS Switch (BUFFER/TRUE): Select between buffered bypass (maintains signal integrity over long cable runs) and true bypass (completely removes the pedal from the signal path when off).
• KILL DRY Switch (ON/OFF): Removes the dry signal from the output, useful for parallel effects loops.

설정

전원 연결

Connect the included 9V DC power supply to the 9V DC/300mA input jack on the rear panel.

오디오 연결

모노 설정

• Connect your guitar to the MONO INPUT jack.
• Connect the MONO OUTPUT jack to your amp리퍼.

스테레오 설정

• Connect your stereo source to both INPUT jacks (left and right).
• Connect both OUTPUT jacks (left and right) to your stereo amp라이저 설정.

USB 연결

For TonePrint editing or firmware updates, connect the USB cable from the pedal to your computer.

Operating the Flashback X4

Selecting Delay Types

Rotate the TONEPRINT knob to select from the 16 available delay types. Each type offers a unique sonic character.

지연 매개변수 조정

Use the DELAY TIME, FEEDBACK, and DELAY LEVEL knobs to fine-tune your desired delay sound. Experiment with these controls to create subtle echoes, long ambient trails, or rhythmic repeats.

탭 템포

The UNDO/REDO (TAP) footswitch allows you to set the delay time by tapping your foot. Tap at least twice to set the tempo.

Looper Functionality

The Flashback X4 includes a 40-second looper.

• 기록: Press the REC (A) footswitch to start recording.
• 재생/정지: Press the PLAY/PAUSE (B) footswitch to play or stop the loop.
• 오버더빙: While playing, press REC (A) again to overdub.
• 실행 취소/다시 실행: Press the UNDO/REDO (TAP) footswitch to undo or redo the last overdub.
• Play Once: Press the ONCE (C) footswitch to play the loop once.

TonePrint Feature

TonePrint allows you to load custom-tuned effects created by famous guitarists directly into your pedal.

• USB를 통해: Connect the pedal to your computer and use the TonePrint Editor software to load custom TonePrints.
• Via Smartphone App: Download the TC Electronic TonePrint App. Select a TonePrint and "beam" it to your pedal by holding your smartphone's speaker near your guitar's pickup.

Official Product Video: Flashback X4 Delay & Looper - 5 Things to Know

이 영상은 빠른 설명을 제공합니다.view of the TC Electronic Flashback X4 Delay & Looper pedal, highlighting its key features such as amazing sounds, instant access to 3 presets, TonePrint technology, tap tempo, and ease of use. It demonstrates how to load TonePrints via USB or smartphone app.

유지

• 페달을 깨끗하고 부드럽게 유지하려면 부드럽고 마른 천으로 닦아주세요.
• Avoid exposing the pedal to extreme temperatures or humidity.
• 장기간 사용하지 않을 경우 전원을 차단하십시오.

문제 해결

• 소리 없음: Check all cable connections, ensure the power supply is connected and working, and verify that the pedal is engaged.
• 소리가 약하거나 왜곡됨: 기타를 확인해 보세요. amplifier volume levels. Ensure correct input/output impedance.
• 루퍼 관련 문제: Ensure sufficient power. Refer to the detailed looper instructions in the full manual for specific recording/playback issues.
• TonePrint Not Loading: Verify USB connection or ensure the smartphone speaker is close to the guitar pickup. Check app/software for updates.

명세서

보증 및 지원

For warranty information, technical support, or further assistance, please visit the official TC Electronic web사이트를 방문하거나 고객 서비스에 문의하세요.

TC 전자 공식 스토어: Visit the TC Electronic Store