소개
The VOX StompLab 1G is a compact multi-effects modeling pedal designed for guitarists. It offers a wide array of sounds and effects, categorized by musical style for ease of use. This manual provides essential information for setting up, operating, and maintaining your StompLab 1G pedal.
그림 1: 전면 view of the VOX StompLab 1G Multi-Effects Modeling Guitar Pedal.
제품 특징
- 100개의 사전 설정 프로그램: A total of 100 preset programs are categorized into styles such as rock, blues, metal, and pop, allowing for quick sound selection.
- 사용하기 쉬운 인터페이스: Designed for intuitive operation, enabling even novice users to instantly access desired sounds.
- 103 Modeling Effects: Provides 103 types of modeling effects for diverse sound shaping.
- Advanced Sound Engine: Each effect model utilizes a sound engine derived from the acclaimed VOX VT+ series of modeling amps and ToneLab series multi-effect units.
- 20 User Programs: Allows users to edit and save up to 20 custom programs.
설정
Powering the StompLab 1G
The StompLab 1G can be powered by either an AC adapter (9V DC) or four AA batteries. An AC adapter is recommended for stable performance, especially during extended use.
- AC 어댑터 연결: Connect the 9V DC power adapter to the DC 9V input jack on the rear panel of the unit.
- 배터리 설치: For portable use, install four AA batteries into the battery compartment located on the underside of the pedal. Refer to the "Maintenance" section for detailed battery installation instructions.
장비 연결
기타를 INPUT 잭에 연결하고 amplifier or headphones to the OUTPUT/PHONES jack. The OUTPUT/PHONES jack supports both stereo and mono connections.
Figure 2: Rear panel connections for input, output, and DC 9V power.
Video 1: This video provides an unboxing and initial overview of the StompLab 1G, demonstrating its physical features and basic connections.
작동 지침
The StompLab 1G features an intuitive control layout for easy sound manipulation.
컨트롤 오버view
- CATEGORY Knob: Use this knob to select from various musical style categories (e.g., Rock & Roll, Blues, Pop, Jazz/Fusion, Ballad, Hard Rock, Metal, Hard Core, Other). Each category contains multiple preset programs.
- GAIN / VALUE1 Knob: Adjusts the gain level of the selected effect or changes the value of parameters during editing.
- LEVEL / VALUE2 Knob: Controls the overall output level or changes the value of parameters during editing.
- FOOTSWITCHES (DOWN/UP): These footswitches allow you to navigate through programs (DOWN/UP) and activate the Bypass/Tuner function by holding both simultaneously.
- 수정 버튼: Used to enter edit mode for customizing programs.
- EFFECT TYPE Button: Selects the effect type within a program during editing.
Figure 3: Control panel with Category, Gain, Level knobs, and footswitches.
프로그램 선택
- 켜다 범주 knob to select a musical style.
- 사용하세요 아래에 그리고 UP footswitches to cycle through the preset programs within the selected category. The display will show the program number.
튜너 사용
To activate the built-in tuner, press and hold both the 아래에 그리고 UP footswitches simultaneously. The display will show tuning information. Press either footswitch again to exit tuner mode.
Video 2: This video demonstrates various effects and sounds from the StompLab series, including the bass guitar version, showcasing the versatility of the pedal's modeling capabilities.
유지
배터리 교체
To replace the batteries in your StompLab 1G, follow these steps:
- 장치의 전원이 꺼져 있고 모든 전원에서 분리되어 있는지 확인하세요.
- 장치를 조심스럽게 거꾸로 뒤집으십시오.
- Unscrew the four rubber feet on the bottom panel. These feet also secure the battery compartment cover.
- Remove the bottom panel to access the battery holder.
- Replace the old AA batteries with four new ones, ensuring correct polarity (+/-).
- Securely reattach the bottom panel and screw the four rubber feet back into place.
Video 3: This video demonstrates the process of adding or replacing batteries in the StompLab effects pedal.
청소
부드럽고 마른 천으로 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
문제 해결
- 소리 없음:
- 모든 케이블 연결 상태를 확인하십시오 (기타와 입력 단자, 출력 단자 등). amp/headphones).
- Ensure the power adapter is securely connected or batteries are correctly installed and charged.
- 기기의 전원이 켜져 있는지 확인하십시오.
- Check the volume levels on the StompLab 1G, your guitar, and your amp헤드폰/이어폰.
- Unexpected Sound/Distortion:
- Adjust the GAIN and LEVEL knobs.
- Ensure the correct program/effect is selected for your desired sound.
- 결함이 있는 케이블이 있는지 확인하세요.
- 장치가 켜지지 않습니다:
- 배터리를 사용 중이라면 새 배터리로 교체하십시오.
- If using an AC adapter, ensure it is the correct 9V DC type and is functioning properly.
명세서
| 모델 번호 | 스톰플랩1G |
| 치수 | 7 x 2 x 7 인치 |
| 품목 무게 | 2.72 온스 |
| 전원 | Battery Powered (4 AA batteries) and AC Adapter (9V) |
| 본체 소재 | 금속 |
| 색상 | 검은색 |
| 커넥터 유형 | 1/4인치 잭 |
| 하드웨어 인터페이스 | 1/4인치 오디오 |
| 신호 형식 | 비슷한 물건 |
상자 안에 무엇이 들어있나요?
- VOX StompLab 1G Multi-Effects Modeling Guitar Pedal
- 전원 어댑터
- 사용자 설명서(본 문서)
- AA 배터리 4개(사전 설치 또는 별도 포함)
보증 및 지원
보증 정보 및 기술 지원에 대해서는 VOX 공식 웹사이트를 참조하십시오. website or contact your local VOX dealer. Keep your purchase receipt as proof of purchase for warranty claims.
