1. 서론
The OSD Audio IWS8 is an 8-inch in-wall passive subwoofer designed to integrate seamlessly into your home audio system. This unit is engineered to deliver enhanced low-frequency sound, complementing your existing speakers for a richer audio experience. Its discreet design features a paintable grille, allowing it to blend with your room's aesthetics. As a passive subwoofer, it requires an external amp작동용 리파이어.
Please read this manual thoroughly before installation and use to ensure proper setup and optimal performance.
2. 패키지 내용
패키지에 모든 구성 요소가 들어 있는지 확인하세요.
- OSD Audio IWS8 8-inch In-Wall Subwoofer
- Dog-ear mount system (pre-installed)
- Integrated rear dust cover (pre-installed)
- Paintable grille
3. 주요 특징
- 파워 핸들링: 150 Watts maximum output.
- 운전사: 8-inch polypropylene subwoofer with butyl rubber surround for durability and performance.
- 설계: 로우프로file in-wall design for discreet integration.
- 설치: Easy-install dog-ear bracket system for secure mounting to drywall.
- 보호: Integrated rear dust shield to protect components and improve sound quality.
- 미학: Paintable frame and grille to match room decor.
- 호환성: Passive design requires an external subwoofer amplifier (e.g., OSD Audio SMP200).
4. 설정 및 설치
올바른 설치는 최적의 성능과 안전을 위해 매우 중요합니다. 설치 과정에 대해 확신이 서지 않는 부분이 있다면 자격을 갖춘 설치 전문가에게 문의하십시오.
4.1 설치 계획
- 위치: Choose a wall location free of studs, electrical wires, plumbing, or other obstructions. Use a stud finder to locate studs.
- 배선: Plan your speaker wire routing from the subwoofer amplifier to the subwoofer location. Ensure you use appropriate gauge speaker wire for the distance.
4.2 필요한 도구
- 스터드 파인더
- 줄자
- 연필
- 석고보드용 톱 또는 다용도 칼
- 와이어 스트리퍼
- 드라이버(필립스 헤드)
- 수준
4.3 벽 개구부 절단
- Carefully measure and mark the desired location on the wall. The cutout dimensions for the IWS8 are approximately 10.5 inches (H) x 10.5 inches (W).
- Use a level to ensure your markings are straight.
- Using a drywall saw or utility knife, carefully cut along the marked lines.
Image: The OSD Audio IWS8 in-wall subwoofer shown with its dimensions, indicating a height of 12 inches, width of 11.5 inches, and depth of 6 inches.
4.4 서브우퍼 배선
- Pull the speaker wire through the wall opening.
- 스피커 선의 양쪽 끝에서 약 1/2인치 정도의 절연체를 벗겨냅니다.
- Connect the positive (+) terminal of the speaker wire to the red (+) terminal on the subwoofer.
- Connect the negative (-) terminal of the speaker wire to the black (-) terminal on the subwoofer. Ensure a secure connection.
이미지: 뒷면 view of the OSD Audio IWS8 in-wall subwoofer, highlighting the speaker wire terminals and the dog-ear mounting clamps.
4.5 서브우퍼 장착
- 서브우퍼를 벽면 개구부에 조심스럽게 삽입합니다.
- Tighten the screws on the front baffle of the subwoofer. This will activate the dog-ear clamps, rotating them outwards to grip the drywall securely.
- Do not overtighten the screws, as this can damage the drywall or the subwoofer frame. Tighten until the subwoofer is snug and flush with the wall surface.
이미지: 위에서 아래로 view of the OSD Audio IWS8 in-wall subwoofer, illustrating the dog-ear mounting clamps in their extended position, ready to secure the unit to a wall.
4.6 그릴 설치
- Once the subwoofer is securely mounted, align the paintable grille with the subwoofer frame.
- The grille is designed to fit snugly. Gently press it into place until it is flush with the wall.
- If desired, the grille can be painted to match your wall color before installation. Ensure paint does not clog the perforations.
이미지: 폭발된 view of the OSD Audio IWS8 in-wall subwoofer, showing the main speaker unit and its separate paintable grille, ready for installation.
5. 운영
5.1 연결 Amp리퍼
The IWS8 is a passive subwoofer and requires an external subwoofer amplifier. OSD Audio recommends using an amplifier such as the SMP200, a 200-watt Class D subwoofer amplifier with an advanced crossover circuit. Connect the speaker output terminals of your subwoofer amplifier to the input terminals of the IWS8, ensuring correct polarity (+ to + and - to -).
5.2 초기 전원 켜기 및 조정
- 전원을 켜기 전에 모든 연결이 안전한지 확인하십시오. amplifier 및 오디오 소스.
- Start with the volume level on your subwoofer amplifier set to a low position.
- Play audio through your system. Gradually increase the amplifier's volume until the desired bass level is achieved.
- Adjust the crossover frequency and phase settings on your subwoofer amplifier to blend the subwoofer's output smoothly with your main speakers. Refer to your amplifier's manual for specific instructions on these adjustments.
6. 유지관리
The OSD Audio IWS8 subwoofer requires minimal maintenance.
- 청소: Periodically wipe the grille and frame with a soft, dry cloth to remove dust. Do not use harsh chemicals or abrasive cleaners.
- 점검: Occasionally check the mounting screws to ensure they remain tight and the subwoofer is securely seated in the wall.
7. 문제 해결
If you encounter issues with your IWS8 subwoofer, refer to the following common troubleshooting steps:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 서브우퍼에서 소리가 나지 않습니다 |
|
|
| 왜곡되거나 불분명한 소리 |
|
|
| 저음이 약하거나 부족함 |
|
|
| Vibration from the wall or grille |
|
|
8. 사양
| 사양 | 값 |
|---|---|
| 상표 | OSD 오디오 |
| 모델 번호 | 아이에스8 |
| 스피커 유형 | 인월 서브우퍼 |
| 우퍼 직경 | 8 인치 |
| 스피커 최대 출력 전력 | 150 와트 |
| 주파수 응답 | 40 Hz (Lower limit, actual range depends on amplifier and room) |
| 임피던스 | 8옴 |
| 장착 유형 | 벽면 내부 |
| 인클로저 재료 | 폴리프로필렌 |
| 품목 치수(D x W x H) | 전체 크기: 깊이 11.5인치 x 너비 12인치 x 높이 6인치 |
| Cutout Dimensions (Approx.) | 10.5인치 x 10.5인치 |
| 연결 기술 | 보조(유선) |
| 내장 미디어 | Subwoofer, dog ear mount system, integrated rear dust cover |
9. 보증 정보
The OSD Audio IWS8 In-Wall Subwoofer is covered by a 10년 보증 from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the OSD Audio web대지.
10. 고객 지원
For further assistance, technical support, or warranty inquiries, please contact OSD Audio customer service. You can find contact information and additional resources by visiting the official OSD Audio web대지: