Pic Solution Classic Med Manual Blood Pressure Monitor User Manual

소개

The Pic Solution Classic Med Manual Blood Pressure Monitor is designed to provide high-quality, accurate blood pressure measurements. Its large dial ensures easy reading of values, and the complete set of accessories makes it a reliable tool for personal health monitoring.

This manual provides essential information for the proper use, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and keep it for future reference.

Image: The Pic Solution Classic Med Manual Blood Pressure Monitor, shown in its retail packaging, highlighting its design and key features.

구성 요소

Your Pic Solution Classic Med Manual Blood Pressure Monitor includes the following components:

• Manometer (Gauge): The circular dial that displays blood pressure readings.
• 동: A comfortable cuff with Velcro closure, designed to fit around the arm.
• Inflation Bulb: A rubber bulb used to inflate the cuff.
• 공기 방출 밸브: A screw valve on the inflation bulb to control air release.
• 운반 케이스: A practical zippered case for storage and transport.

이미지: 클로즈업 view of the main components: the manometer (gauge), the arm cuff, and the inflation bulb with its air release valve.

설정

Before taking a measurement, ensure the device is properly assembled and you are in a suitable environment.

1. 장치 포장 풀기: 휴대용 케이스에서 모든 구성품을 조심스럽게 꺼내십시오.
2. 커프를 연결하세요: 커프에서 나온 공기 튜브가 압력계에 단단히 연결되어 있는지 확인하십시오.
3. 측정 준비: Sit comfortably with your back supported and feet flat on the floor. Rest your arm on a table so that the cuff will be at heart level. Avoid talking or moving during the measurement.
4. 커프를 적용하세요: Wrap the cuff firmly around your bare upper arm, approximately 2-3 cm above the elbow. The artery mark on the cuff should be positioned over your brachial artery (on the inside of your arm). Ensure it is snug but not too tight; you should be able to slide two fingers under the cuff.

Image: The Pic Solution Classic Med Manual Blood Pressure Monitor laid out next to its compact zippered carrying case, ready for setup or storage.

작동 지침

Follow these steps to accurately measure your blood pressure using the auscultatory method (requires a stethoscope, not included):

1. Locate Pulse: Place the diaphragm of a stethoscope over the brachial artery in the crook of your elbow.
2. 밸브 닫기: Turn the air release valve on the inflation bulb clockwise until it is fully closed.
3. 커프 팽창시키기: Rapidly pump the inflation bulb to inflate the cuff. Watch the manometer dial and inflate the cuff to about 20-30 mmHg above your usual systolic pressure, or until the pulse sound disappears.
4. Release Air Slowly: 공기 배출 밸브를 시계 반대 방향으로 천천히 돌려 열어 압력이 초당 2~3mmHg의 속도로 떨어지도록 하십시오.
5. Listen for Systolic Pressure: Listen carefully through the stethoscope. The first distinct, tapping sound you hear is your systolic blood pressure. Note the reading on the manometer.
6. Listen for Diastolic Pressure: Continue to release air. The point at which the sounds disappear or become very faint is your diastolic blood pressure. Note this reading.
7. 완전히 수축: Once the diastolic reading is taken, fully open the air release valve to rapidly deflate the cuff.
8. 기록된 측정값: Record your systolic and diastolic blood pressure readings. Wait at least 5 minutes before taking another measurement.

메모: For accurate readings, it is recommended to consult with a healthcare professional for proper technique and interpretation of results.

유지 보수 및 관리

적절한 유지 관리는 혈압계의 수명과 정확성을 보장합니다.

• 청소: 부드러운 천으로 소매단을 닦으세요.amp cloth and mild soap. Do not immerse the cuff or manometer in water. Wipe the manometer and inflation bulb with a dry or slightly damp 옷감.
• 저장: Store the device in its practical zippered carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
• 손상을 방지하세요: Do not drop the manometer or subject it to strong impacts. Avoid bending the air tubes sharply.
• 구경 측정: Manual blood pressure monitors should be calibrated periodically (e.g., every 1-2 years) by a qualified technician to ensure continued accuracy.

Image: The compact zippered carrying case for the Pic Solution Classic Med Manual Blood Pressure Monitor, designed for convenient storage and portability.

문제 해결

혈압계 사용 중 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.

명세서

보증 및 지원

Pic Solution products are manufactured to high-quality standards. For information regarding warranty coverage, product support, or service, please refer to the warranty card included with your product or visit the official Pic Solution web대지.

For direct assistance, you may contact Pic Solution customer service through their official channels. Please have your model number (SF1145240) and purchase details ready when contacting support.

This manual is for informational purposes only and does not replace professional medical advice. Always consult with a healthcare professional for diagnosis and treatment of health conditions.