Williams JHW2M-618
Williams JHW2M-618 3/8-Inch Drive Shallow Impact Socket Instruction Manual
소개
This manual provides essential information for the proper use and maintenance of your Williams JHW2M-618 3/8-Inch Drive Shallow Impact Socket. Please read these instructions carefully before use to ensure safe and effective operation.
주요 특징
- SUPERTORQUE Lobular Openings: Designed for greater turning power without deforming the fastener.
- Maximum Engagement: Engineered for optimal engagement on 6-point fasteners.
- Impact Use: Suitable for use with pneumatic and electric impact wrenches.
- 내구성: Specially heat-treated for impact use to provide long life, safety, and durability.
- 고품질 제조: 미국에서 제작되었습니다.
Image: Williams 3/8-Inch Drive Shallow Impact Socket, 18 MM size. This image shows the overall design and finish of the impact socket.
설정
The Williams JHW2M-618 impact socket is designed for immediate use with compatible drive tools. No assembly is required.
- 올바른 사이즈를 선택하세요: Ensure the 18 MM socket size matches the fastener you intend to work with.
- Choose Compatible Drive Tool: Use with a 3/8-inch drive pneumatic or electric impact wrench, or a standard ratchet/breaker bar.
- 소켓 검사: Before each use, inspect the socket for any signs of wear, cracks, or damage. Do not use damaged tools.
작동 지침
안전하고 효과적인 작업을 위해 다음 단계를 따르세요.
- 소켓 부착: Firmly attach the 18 MM impact socket to the 3/8-inch drive of your impact wrench or ratchet. Ensure it is fully seated and secure.
- Position on Fastener: Place the socket squarely onto the head of the fastener (nut or bolt). Ensure full engagement to prevent rounding the fastener.
- 토크를 적용하세요:
- For impact wrenches: Activate the tool, applying steady pressure until the fastener is tightened or loosened as required.
- For manual tools: Apply steady, controlled force to the handle of the ratchet or breaker bar.
- 소켓 제거: 작업이 완료되면 소켓을 패스너에서 분리한 다음 드라이브 공구에서도 분리하십시오.
안전 예방 조치: Always wear appropriate personal protective equipment, including safety glasses, when using impact tools.
유지
Proper maintenance ensures the longevity and performance of your Williams impact socket.
- 청소: After each use, wipe the socket clean of any dirt, grease, or debris. A mild solvent can be used if necessary, followed by thorough drying.
- 매끄럽게 하기: Lightly oil the socket periodically to prevent rust, especially if stored in humid conditions.
- 저장: Store sockets in a dry environment, preferably in a tool tray or box, to protect them from damage and corrosion.
- 점검: Regularly inspect for wear, cracks, or deformation. Replace any damaged sockets immediately.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 소켓이 패스너에 끼웁니다. | Incorrect size; fastener head worn; socket worn | Ensure correct socket size; replace worn fastener; replace worn socket. |
| Socket stuck on drive tool | Dirt/debris in drive square; rust; tight fit | Clean drive square; apply penetrating oil; gently tap to loosen. |
| Socket shows signs of cracking/damage | Over-torquing; material fatigue; improper use | Discontinue use immediately and replace the socket. |
명세서
- 상표: 윌리엄스
- 모델 번호: JHW2M-618
- 드라이브 크기: 3/8인치
- 소켓 유형: Shallow Impact Socket
- Point Configuration: 6 포인트
- 크기: 18 Millimeter (18 MM)
- 재료: Specially heat-treated alloy steel
- 제조 원산지: 미국
비디오 리소스
Williams Sockets and Impact Sockets Overview
이 비디오는 이상을 제공합니다view of Williams sockets and impact sockets, highlighting features such as SUPERTORQUE lobular openings, chamfered ends, grip rings, and heavy-duty construction suitable for pneumatic and electric impact wrenches. It demonstrates the design principles for maximum engagement and durability.
보증 및 지원
Williams products are manufactured to high standards and are backed by a commitment to quality. For specific warranty details, product support, or to inquire about service, please refer to the official Williams web해당 사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.
제조업체: JH Williams Tool Group
브랜드 스토어: Visit the Williams Store on Amazon
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.