1. 서론
This manual provides detailed instructions for the proper setup, operation, and maintenance of your AmScope ME1400T Inverted Trinocular Metallurgical Microscope. This instrument is designed for observing opaque or metallic specimens, or larger specimens that cannot be viewed on a standard microscope stage, utilizing reflected light.
The ME1400T features 40X-400X magnification, WF10x eyepieces with a reticle, Kohler condenser, 30W halogen illumination with rheostat, and a double-layer mechanical stage. Please read this manual thoroughly before using the microscope to ensure safe and optimal performance.
Figure 1: AmScope ME1400T Inverted Trinocular Metallurgical Microscope
2. 안전 정보
- Always handle the microscope with care. Avoid sudden movements or impacts.
- 현미경이 넘어지지 않도록 안정적이고 평평한 표면에 놓으십시오.
- Connect the power cord only to a grounded electrical outlet with the correct voltage(85-230V).
- Do not expose the microscope to direct sunlight, high temperatures, dust, or high humidity.
- 청소 또는 유지 보수를 하기 전에 전원 코드를 뽑으십시오.
- Never touch optical surfaces with bare hands. Use a soft, lint-free cloth or lens paper for cleaning.
- Keep small parts and accessories away from children.
- If the halogen bulb needs replacement, ensure the microscope is unplugged and the bulb has cooled down to prevent burns.
3. 구성 요소 이상view
Familiarize yourself with the main components of your ME1400T microscope:
- Trinocular Head: 동시 허용 viewing through eyepieces and connection of a camera to the vertical port. Features a Siedentopf design for interpupillary distance adjustment and 45-degree inclination for comfortable view주고받음.
- 접안렌즈: Includes a pair of 10x20mm high-eyepoint super-widefield eyepieces and one 10x measuring eyepiece with a built-in reticle and micrometer (0.1mm graduations).
- 노즈피스: Forward-facing quintuple nosepiece holding the objective lenses.
- 대물렌즈: Four DIN metallurgical objectives (4x, 10x, 20x, 40x) providing color correction and improved focus.
- 기계식 Stage: Double-layer mechanical stage with a removable stage plate and stage stop to protect specimens and objectives.
- 초점 조절 노브: Graduated coarse and fine focus knobs with tension control.
- 조명 시스템: Episcopic reflected and Brightfield illumination with a 30W halogen light source and rheostat for intensity control. Includes a polarizing condenser.
Figure 2: WF10x Eyepieces with Diopter Adjustment
Figure 3: Quintuple Nosepiece with Metallurgical Objectives
Figure 4: Double-Layer Mechanical Stage
4. 설정
- 짐 풀기: 포장에서 모든 구성품을 조심스럽게 꺼내십시오. 향후 운송 또는 보관을 위해 원래 포장재를 보관하십시오.
- 놓기: Place the microscope on a sturdy, level, and vibration-free surface. Ensure adequate space around the instrument for operation and ventilation.
- Attach Trinocular Head: Gently insert the trinocular head into the top port of the microscope body. Secure it by tightening the set screw.
- 접안렌즈를 삽입하세요: Insert the pair of WF10x20mm eyepieces into the binocular tubes. If using the measuring eyepiece, replace one of the WF10x20mm eyepieces with it.
- 전원 연결: Plug the power cord into the microscope's power input, then into a grounded electrical outlet.
- 초기 조정:
- 동공간 거리: While looking through the eyepieces, adjust the distance between the two eyepiece tubes until a single, clear circular field of view 관찰됩니다.
- 디옵터 조정: Focus on a specimen using the 10x objective and the right eyepiece only. Then, without touching the coarse or fine focus knobs, adjust the diopter ring on the left eyepiece until the image is sharp through the left eyepiece.
5. 사용 설명서
- 전원 켜기: Flip the main power switch to the 'ON' position. The halogen illumination should light up.
- 조명 조정: Use the rheostat knob to adjust the brightness of the halogen light source to a comfortable level.
- 표본 채취 장소: Place your specimen on the mechanical stage. s를 사용하세요tag필요한 경우 고정용 클립이 있습니다.
- Select Objective: Rotate the nosepiece to select the lowest power objective (e.g., 4x) first. Ensure the objective clicks firmly into place.
- 초점:
- Using the coarse focus knob, slowly raise the stage until the specimen comes into approximate focus.
- Use the fine focus knob to achieve a sharp, clear image.
- 배율 변경: Rotate the nosepiece to a higher power objective. The microscope is parfocal, meaning only minor adjustments with the fine focus knob should be needed.
- Using the Measuring Eyepiece: If installed, the measuring eyepiece allows for basic measurements. Calibrate the reticle using a stage micrometer (not included) for accurate measurements at different magnifications.
- 삼안 포트: For camera attachment, slide the light path selector (if present) to direct light to the vertical trinocular port. A camera (sold separately) can be mounted here for image capture. The port has a 100% light-splitting rate.
- Polarizing Illumination: The integrated polarizing condenser can be engaged for observing specimens under polarized light, enhancing contrast for certain materials.
- 전원 끄기 : After use, turn the rheostat to the lowest setting, then flip the main power switch to 'OFF'. Unplug the microscope if it will not be used for an extended period.
6. 유지관리
- 렌즈 세척: Use a soft brush to remove dust, then gently wipe with lens paper moistened with lens cleaning solution. Do not use abrasive cloths or solvents.
- 일반 청소: 현미경 본체를 부드러운 천으로 닦으십시오.amp cloth. Avoid getting moisture into electrical components.
- 할로겐 전구 교체:
- Unplug the microscope and allow the bulb to cool completely.
- Locate the bulb housing (refer to your specific model's diagram if available).
- Carefully remove the old bulb and insert a new 30W halogen bulb, avoiding touching the glass with bare hands.
- Secure the housing and plug in the microscope.
- 저장: 사용하지 않을 때는 먼지와 이물질로부터 현미경을 보호하기 위해 먼지 덮개를 씌우십시오. 서늘하고 건조한 곳에 보관하십시오.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명 없음 | Power cord unplugged, power switch off, bulb burnt out. | Check power connection, turn on switch, replace bulb. |
| 이미지가 흐릿하거나 초점이 맞지 않습니다. | Incorrect focus adjustment, objective not fully engaged, dirty lens. | Adjust coarse/fine focus, rotate nosepiece until objective clicks, clean lenses. |
| 고르지 못한 조명 | Condenser not centered, light source obstruction. | Adjust Kohler condenser, check for obstructions in light path. |
| Cannot adjust interpupillary distance | Head not properly seated or secured. | Ensure trinocular head is fully inserted and set screw is tightened. |
8. 사양
| 특징 | 사양 |
|---|---|
| 모델 | 미티(ME1400T) |
| 현미경 종류 | Inverted Trinocular Metallurgical |
| 확대 범위 | 40배 - 400배 |
| 접안렌즈 | WF10x20mm (pair), 10x Measuring Eyepiece (with 0.1mm reticle) |
| 대물렌즈 | 4x, 10x, 20x, 40x DIN Metallurgical Achromatic |
| 코받침 | Quintuple, Forward-facing |
| View잉 헤드 | Siedentopf Trinocular, 45-degree inclination |
| 동공간 거리 | 55~75mm |
| 조명 | Episcopic Reflected Brightfield and Polarizing, 30W Halogen with Rheostat |
| 콘덴서 | Kohler, Polarizing |
| Stage | Double-Layer Mechanical Stag전자와 Stage Stop |
| 초점 맞추기 | Coarse and Fine Adjustment with Tension Control |
| 전원 공급 장치 | 85-230V |
| 품목 무게 | 27.22kg(60파운드) |
9. 보증 및 지원
For warranty information, technical support, or service inquiries regarding your AmScope ME1400T microscope, please contact AmScope customer service directly. Refer to the official AmScope web최신 연락처 정보 및 보증 조건은 웹사이트 또는 구매 서류를 참조하십시오.
향후 지원이 필요할 경우를 대비하여 구매 후 제품 등록을 권장합니다.