소개
Thank you for choosing the QFX S15 Universal PA Tripod Speaker Stand. This stand is designed to provide stable and adjustable support for your PA speakers, enhancing sound projection and optimizing your audio setup. Constructed from aluminum, it offers durability and portability. Please read this manual thoroughly before assembly and use to ensure proper operation and safety.
Image: The QFX S15 Universal PA Tripod Speaker Stand, shown fully extended with its black finish and sturdy tripod base.
안전 정보
To prevent injury or damage to your equipment, observe the following safety precautions:
- 하중 용량: Do not exceed the maximum load capacity of 80 lbs (36.2 kg). Overloading can cause instability and collapse.
- 안정적인 표면: 스탠드는 항상 평평하고 수평이며 안정적인 표면에 놓으십시오. 표면이 고르지 않으면 넘어질 수 있습니다.
- 다리 벌리기: Ensure the tripod legs are fully extended and locked into position to maximize stability.
- 스피커 장착: Securely mount the speaker onto the stand's pole. Ensure it is centered and balanced.
- 조정 사항: Make height adjustments carefully. Always loosen adjustment knobs before moving the pole and tighten them securely afterward.
- 장애물: Keep the area around the stand clear to prevent accidental bumps or trips.
- 어린이와 애완동물: Keep children and pets away from the stand, especially during setup and adjustment.
- 점검: 스탠드에 마모, 손상 또는 헐거워진 부품이 있는지 정기적으로 점검하십시오. 손상된 경우 사용하지 마십시오.
패키지 내용
패키지에 모든 구성 요소가 들어 있는지 확인하세요.
- 1 x QFX S15 Universal PA Tripod Speaker Stand
If any parts are missing or damaged, please contact QFX customer support.
설치 지침
Follow these steps to set up your QFX S15 Speaker Stand:
- 다리를 펼치세요: Place the stand on a flat, stable surface. Gently pull the tripod legs outwards until they are fully extended and form a wide, stable base. Ensure the leg brace is locked into position.
- 높이 조정: Loosen the height adjustment knob located on the main pole. Carefully extend the inner pole to the desired height. Do not extend beyond the maximum height indicator (if present) or to a point where stability is compromised.
- 안전 높이: Once the desired height is reached, firmly tighten the height adjustment knob to lock the inner pole in place. Ensure there is no wobble.
- 스피커 장착: Carefully lift your PA speaker and align its mounting socket with the top pole of the stand. Lower the speaker onto the pole, ensuring it sits securely and is centered.
- 최종 확인: Gently shake the stand to confirm stability. If there is any instability, re-check all connections and adjustments.
작동 지침
The QFX S15 stand is designed for straightforward operation:
- 높이 조정: To change the speaker height, first remove the speaker from the stand for safety. Loosen the height adjustment knob, set the pole to the new desired height, and then firmly re-tighten the knob. Re-mount the speaker.
- 휴대성: For transport or storage, remove the speaker, loosen the height adjustment knob to retract the inner pole, and then fold the tripod legs inwards. Secure any loose parts.
유지
적절한 유지 관리는 스피커 스탠드의 수명 연장과 안전한 작동을 보장합니다.
- 청소: Wipe the stand with a soft, dry cloth to remove dust and dirt. For stubborn marks, use a slightly damp 천과 순한 비누로 닦은 후 완전히 말리십시오. 연마성 세제나 용제는 사용하지 마십시오.
- 저장: Store the stand in a dry, cool place, away from direct sunlight and extreme temperatures. Ensure it is fully collapsed and secured to prevent accidental unfolding.
- 점검: Periodically check all bolts, screws, and adjustment knobs for tightness. Inspect the aluminum tubing and plastic components for any cracks, bends, or damage. Replace any worn or damaged parts immediately.
문제 해결
If you encounter issues with your speaker stand, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스탠드가 불안정하거나 흔들립니다. | Legs not fully extended or locked; uneven surface; adjustment knob loose; overloaded. | Ensure legs are fully spread and locked. Move to a flat, level surface. Tighten all adjustment knobs. Verify speaker weight does not exceed 80 lbs. |
| 높이 조절이 어려움. | Adjustment knob too tight; inner pole stuck. | Loosen the adjustment knob completely. Apply gentle, even pressure to the pole. Ensure no debris is obstructing movement. |
| Speaker does not sit securely on the pole. | Speaker mounting socket is not compatible or damaged; speaker not centered. | Ensure your speaker has a standard 35mm pole mount. Center the speaker carefully. If the socket is damaged, do not use the stand. |
If the problem persists, contact QFX customer support.
명세서
| 상표 | QFX |
| 모델 번호 | 에스-15 |
| 재료 | Aluminum construction (main frame), Plastic (connectors/knobs) |
| 색상 | 검은색 |
| 높이 조절 가능 | 46인치 ~ 72인치(116.8cm ~ 182.9cm) |
| 하중 용량 | 80파운드(36.2kg) |
| 극 직경 | 1.38인치(35mm) |
| 품목 무게 | 5.15파운드(2.34kg) |
| 제품 크기(L x W x H) | 완전히 펼쳤을 때 크기: 길이 72인치 x 너비 1.38인치 x 높이 72인치 |
| 핏 타입 | 유니버설 핏 |
| 한국어: | 606540012208 |
보증 및 지원
보증: The QFX S15 Speaker Stand comes with a 1년 제조사 보증 구매일로부터 적용됩니다. 본 보증은 정상적인 사용 조건에서 발생하는 재료 및 제조상의 결함에 적용됩니다. 단, 오용, 사고, 무단 개조 또는 명시된 하중 용량 초과로 인한 손상은 보증 대상에서 제외됩니다.
고객 지원: For technical assistance, warranty claims, or to inquire about replacement parts, please visit the official QFX web해당 웹사이트를 방문하거나 고객 서비스 부서에 문의하십시오. 자세한 연락처 정보는 구매 서류를 참조하십시오.
온라인 리소스: 추가 정보 및 제품 업데이트는 다음 웹사이트를 방문하세요. QFX Store on Amazon.