LENOX Tools SPEED SLOT Bi-Metal Hole Saw Kit

소개

This manual provides essential information for the safe and effective use of your LENOX Tools SPEED SLOT Bi-Metal Hole Saw Kit. This 7-piece compact construction kit is designed for cutting various materials, including metal and wood, with enhanced speed and durability. Please read this manual thoroughly before operation to ensure proper usage and to maximize the lifespan of your tools.

키트 내용

The LENOX Tools SPEED SLOT Bi-Metal Hole Saw Kit (Model 1815140) includes the following components:

• Assorted Bi-Metal Hole Saws (7 pieces)
• Arbors for mounting hole saws
• Pilot Drill Bits
• 내구성 있는 보관 케이스

Figure 1: LENOX Tools SPEED SLOT Bi-Metal Hole Saw Kit, 7-Piece Compact Construction Kit.

설정

1. Select the Correct Hole Saw: Choose the appropriate diameter hole saw for your application.
2. Attach Arbor and Pilot Bit: Securely screw the selected hole saw onto the arbor. Ensure the pilot drill bit is firmly seated in the arbor. For optimal performance and to prevent stripping, ensure the two pins on the arbor engage with the corresponding holes in the hole saw before tightening the collar. This transfers the load to the pins, not the threads.
3. 드릴에 삽입하십시오: Insert the arbor's shank into the chuck of your power drill and tighten securely.

Figure 2: Optimized tooth design for efficient metal penetration.

작동 지침

1. 안전이 최우선입니다. 전동 공구를 작동할 때는 항상 안전 안경, 장갑, 귀 보호구 등 적절한 개인 보호 장비(PPE)를 착용하십시오.
2. 작업물 준비: Secure the material you are cutting to prevent movement during operation.
3. 드릴링 시작: Position the pilot bit on the desired center point. Begin drilling at a slow speed to allow the pilot bit to penetrate and stabilize the hole saw.
4. 속도 증가: Once the hole saw teeth engage the material, gradually increase the drill speed. Apply steady, even pressure. Avoid excessive force, which can lead to overheating and premature wear.
5. 잔해물 청소: For deeper cuts or softer materials, periodically withdraw the hole saw to clear chips and debris from the cutting area.
6. Plug Removal (SPEED SLOT Design): The unique Staircase SPEED SLOTS allow for easy plug removal. Once the cut is complete, use a screwdriver or similar tool to pry out the cut material through the wide slots.

Figure 3: Utilizing the SPEED SLOT design for efficient plug removal.

유지

• 청소: After each use, clean the hole saws and arbors to remove any accumulated debris, dust, or metal shavings. A stiff brush and compressed air can be effective.
• 매끄럽게 하기: For cutting metal, use appropriate cutting fluid or lubricant to reduce friction and heat, extending the life of the hole saw.
• 점검: Regularly inspect the teeth of the hole saws for wear, damage, or missing teeth. Replace dull or damaged hole saws to maintain cutting efficiency and safety.
• 저장: Store the kit in its original durable case in a dry environment to prevent rust and damage.

Figure 4: T3 Technology ensures longer tool life, even with regular use.

문제 해결

명세서

• 모델: 1815140
• 키트 유형 : 7-Piece Compact Construction Kit
• 재료: 바이메탈
• 호환 가능한 재료: Metal, Wood, Two-by Lumber
• 기술: SPEED SLOT, T3 Technology
• 색상: 흰색/파란색
• 제품 크기: 9인치 길이 x 5인치 너비
• 품목 무게: 0.01 Ounces (Note: This weight seems unusually low and might refer to a single component or be an error in source data. Refer to packaging for accurate weight.)
• 한국어: 885363008647

보증 및 지원

For warranty information, product registration, or technical support, please visit the official Lenox web해당 사이트를 방문하거나 고객 서비스 부서에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.

Lenox Official Web대지: www.lenoxtools.com