1. 제품 오버view
The Bernstein Design 1521 is a high-quality freestanding bathtub faucet designed for modern bathrooms. It features a sleek chrome finish and is constructed from durable brass. This faucet includes a single-lever mixer and an integrated hand shower for versatile use.
주요 특징:
- 재료: Chromed brass for durability and aesthetic appeal.
- 작동 범위: Suitable for water pressure from 0.5 bar to 8 bar, with a maximum temperature of 90°C.
- 무게: Approximately 5500 g, ensuring stability.
- 사이: Standard DIN connectors for easy integration.
- 손 샤워: Includes a 1.50 m shower hose (plastic with highly flexible metallic effect) and a square hand shower.
- 탄약통: High-quality, replaceable ceramic cartridge for smooth operation and longevity.
- 호환성: Also suitable for gas water heaters.
- 설치: Designed for easy installation as a freestanding unit.
Image: The Bernstein Design 1521 freestanding bathtub faucet in operation, showing water flowing from the main spout and the attached hand shower.
2. 안전 지침
- 설치 또는 유지 보수 작업을 하기 전에 항상 메인 급수 밸브를 잠그십시오.
- 모든 연결 부분이 제대로 밀봉되어 누출을 방지하세요.
- 크롬 도금 표면에 연마성 세척제나 독한 화학 약품을 사용하지 마십시오. 손상될 수 있습니다.
- 설치 단계에 대해 확실하지 않은 경우 자격을 갖춘 배관공에게 문의하세요.
- 작은 부품은 어린이의 손이 닿지 않는 곳에 보관하세요.
- Verify that the water pressure and temperature in your system are within the specified operating range (0.5-8 bar, max 90°C).
3. 설치 가이드
This section provides general guidelines for installing the Bernstein Design 1521 freestanding bathtub faucet. Professional installation is recommended.
3.1. 개봉 및 검사
- Carefully unpack all components and check for any damage during transit.
- 포장 목록에 나열된 모든 부품이 들어 있는지 확인하세요.
Image: The faucet components are securely packaged in foam for protection during shipping.
3.2. 구성 요소 이상view
Familiarize yourself with the various parts of the faucet before beginning installation.
Image: All parts of the faucet system, including the main column, spout, hand shower, flexible hoses, mounting plate, and fasteners.
3.3. 사전 설치 단계
- 욕실의 주수도를 차단하세요.
- 물관을 씻어서 이물질을 제거하세요.
- Prepare the floor area where the faucet will be installed, ensuring it is clean and level.
3.4. 수도꼭지 장착
- Position the mounting base on the floor at the desired location. Mark the drilling points.
- Drill holes according to the markings and insert appropriate anchors (if required for your flooring type).
- Secure the mounting base to the floor using the provided screws.
- Connect the hot and cold water supply lines to the flexible hoses extending from the faucet column. Ensure proper sealing with plumber's tape or thread sealant.
- Carefully place the faucet column onto the mounting base, aligning the connections. Secure the faucet column to the base.
- Attach the hand shower hose to the designated outlet on the faucet body.
Image: The complete freestanding faucet unit, illustrating its overall design and the 21 cm spout length.
3.5. 설치 후 점검
- 주요 물 공급장치를 천천히 켜세요.
- 모든 연결 부위에 누수가 있는지 확인하십시오. 누수가 발견되면 즉시 조여주십시오.
- Test the faucet and hand shower for proper water flow and temperature control.
4. 사용 설명서
4.1. 물 흐름 및 온도 조절
The faucet features a single lever for controlling both water flow and temperature.
- To turn on the water, lift the lever.
- To increase water flow, lift the lever further.
- To adjust temperature, move the lever left for hot water and right for cold water.
- To turn off the water, push the lever down.
Image: Detail of the single lever handle for precise control of water flow and temperature.
4.2. Using the Hand Shower
- To activate the hand shower, pull the diverter knob located on the faucet body.
- Water will divert from the main spout to the hand shower.
- After use, push the diverter knob back in to return water flow to the main spout.
Image: The integrated square hand shower with its flexible hose, ready for use.
5. 유지관리 및 관리
5.1. 수도꼭지 청소
- 수도꼭지는 부드러운 천과 순한 비누 또는 크롬 마감재 전용으로 제작된 비연마성 세척제를 사용하여 정기적으로 청소하십시오.
- 깨끗한 물로 깨끗이 헹구고 부드러운 천으로 말려 물 얼룩이 생기지 않도록 하세요.
- Do not use abrasive sponges, scouring pads, or cleaners containing alcohol, ammonia, bleach, or phosphoric acid, as these can damage the chrome finish.
5.2. 폭기기 유지보수
Periodically unscrew the aerator at the end of the spout to clean out any mineral deposits or debris that may affect water flow.
Image: Detail of the faucet spout and aerator, which can be removed for cleaning.
5.3. 세라믹 카트리지
The faucet is equipped with a high-quality, replaceable ceramic cartridge. If you experience persistent dripping or difficulty controlling water flow/temperature, the cartridge may need to be replaced. Consult a professional plumber for cartridge replacement.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 물의 흐름이 적다 | 통기기가 막혔습니다. 차단 밸브가 부분적으로 닫혔습니다. 수압이 낮습니다. | Clean the aerator; ensure shut-off valves are fully open; check main water pressure. |
| 주둥이에서 누수 | Worn ceramic cartridge; loose connections. | Replace ceramic cartridge (professional recommended); check and tighten connections. |
| Water not diverting to hand shower | Diverter knob not fully engaged; debris in diverter mechanism. | Ensure diverter knob is pulled out completely; clean diverter mechanism if accessible. |
| 수온이 일정하지 않음 | 세라믹 카트리지 불량; 온수기 문제. | Replace ceramic cartridge; consult a professional for water heater inspection. |
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 1521 |
| 상표 | 번스타인 |
| 유형 | 독립형 욕조 수도꼭지 |
| 재료 | Chromed Brass |
| 핸들 수 | 1 (싱글 레버) |
| 작동 압력 | 0.5 bar ~ 8 bar |
| 최대 수온 | 90도 |
| 무게 | 약 5500g |
| 샤워 호스 길이 | 1.50분 |
| 카트리지 타입 | Replaceable Ceramic Cartridge |
| 사이 | DIN Standard |
8. 보증 및 지원
Bernstein products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Bernstein website. For technical support or spare parts, please contact Bernstein customer service.
연락처 정보:
- Web대지: www.bernstein-badshop.de (General brand web(사이트별 특정 지원 링크는 다를 수 있습니다.)
- Refer to your purchase receipt or product packaging for direct customer service contacts.