1. 서론
The Clearaudio Concept MC Moving Coil Phono Cartridge is engineered for high-fidelity audio reproduction, designed to extract detailed musical information from your vinyl records. It features an innovative aluminum-magnesium alloy body with ceramic coating for superior damping and resonance control. Equipped with a Micro-line stylus on an ultra-rigid Boron cantilever, this cartridge offers precise tracking and an expansive soundstage. This manual provides essential information for the proper setup, operation, and maintenance of your Clearaudio Concept MC cartridge.
2. 안전 정보
Please read and understand all safety instructions before installing or operating the Clearaudio Concept MC cartridge. Failure to do so may result in damage to the product or other audio components.
- 조심스럽게 다루십시오: The stylus and cantilever are extremely delicate. Always handle the cartridge with utmost care, avoiding contact with the stylus.
- 어린이의 손이 닿지 않는 곳에 보관하세요: 작은 부품은 질식 위험이 있을 수 있습니다.
- 정전기 : 카트리지의 민감한 부품 손상을 방지하기 위해 카트리지를 만지기 전에 몸의 정전기를 방전시키십시오.
- 적절한 도구: Use only appropriate, non-magnetic tools for installation to avoid damaging the cartridge or tonearm.
- 스타일러스 보호대: Always use the provided stylus guard when the cartridge is not in use or during installation/removal.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Clearaudio Concept MC Moving Coil Phono Cartridge
- 스타일러스 가드
- Mounting Screws (various lengths)
- Hex Key or Screwdriver for mounting
- 스타일러스 청소용 브러시
- Alignment Protractor (may be included with turntable or sold separately)
4. 제품 오버view
Figure 1: Clearaudio Concept MC Moving Coil Phono Cartridge. This image displays a close-up view of the cartridge, highlighting its black aluminum-magnesium alloy body, the delicate cantilever, and the Micro-line stylus.
The Clearaudio Concept MC cartridge is a precision instrument. Key components include:
- 카트리지 본체: Constructed from an aluminum-magnesium alloy with a ceramic coating, providing excellent rigidity and damping 속성.
- 외팔보: An ultra-rigid Boron cantilever transmits vibrations from the stylus to the coil assembly.
- 첨필: A Micro-line diamond stylus, designed for optimal contact with the record groove and superior detail retrieval.
- 출력 핀: Four color-coded pins (Red, Green, White, Blue) for connecting to the tonearm wires.
5. 설정
Proper installation is crucial for optimal performance. Refer to your turntable and tonearm manuals for specific instructions where applicable.
5.1 카트리지 장착
- Ensure the stylus guard is in place.
- Carefully attach the cartridge to the tonearm's headshell using the provided non-magnetic screws. Do not overtighten.
- Connect the tonearm wires to the corresponding color-coded pins on the cartridge:
- 빨간색: 오른쪽 채널 핫(+)
- 녹색: 오른쪽 채널 접지(-)
- 흰색: 왼쪽 채널 핫(+)
- 파란색: 왼쪽 채널 접지(-)
5.2 Cartridge Alignment
Accurate alignment minimizes tracking error and distortion. Use an alignment protractor (not included with all cartridges) specific to your tonearm's geometry.
- 위에 걸리다: Adjust the cartridge position in the headshell until the stylus aligns with the specified points on the protractor.
- 방위각: Ensure the cartridge body is perfectly parallel to the record surface when viewed from the front. Some tonearms allow for fine azimuth adjustment.
- Vertical Tracking Angle (VTA): Adjust the tonearm height so that the tonearm tube is parallel to the record surface when the stylus is in the groove.
5.3 트래킹 포스 조정
The recommended tracking force for the Clearaudio Concept MC is typically between 2.0 and 2.2 grams. Refer to the specifications section for the precise range.
- Balance your tonearm according to its manufacturer's instructions.
- Set the tracking force using your tonearm's counterweight or a digital tracking force gauge to the recommended value.
5.4 안티스케이트 조정
Set the anti-skate mechanism on your tonearm to match the tracking force. This compensates for the inward force on the stylus as the record plays.
6. 사용 설명서
Once installed and aligned, your Clearaudio Concept MC cartridge is ready for use.
- Ensure your phono preamplifier is set to the correct input (Moving Coil - MC) and gain settings appropriate for a low-output MC cartridge.
- Carefully remove the stylus guard.
- Place a clean record on the turntable platter.
- Using the tonearm lift, gently lower the stylus into the record groove. Avoid dropping the tonearm.
- After playback, use the tonearm lift to raise the tonearm and return it to its rest. Replace the stylus guard.
7. 유지관리
Regular maintenance ensures longevity and optimal sound quality.
7.1 스타일러스 청소
Clean the stylus before each listening session or after every few sides of a record.
- Use a dedicated stylus cleaning brush, brushing gently from back to front (from the pivot point towards the stylus tip).
- For stubborn dirt, a small drop of specialized stylus cleaning fluid can be applied to the brush, then gently brush the stylus.
- Never brush the stylus from side to side or front to back, as this can damage the cantilever.
7.2 Cartridge Body Cleaning
Wipe the cartridge body occasionally with a soft, dry, lint-free cloth to remove dust. Avoid using liquid cleaners near the stylus or cantilever.
7.3 Stylus Inspection
Periodically inspect the stylus for wear or damage using a magnifying glass. A worn stylus can damage your records and degrade sound quality. Stylus replacement is recommended after approximately 1000-2000 hours of playback, depending on record condition and tracking force.
8. 문제 해결
If you experience issues, consult the following table before contacting support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 소리가 안 나거나 아주 작게 들린다. | Incorrect phono input selected; loose tonearm wire connections; incorrect phono stage gain; damaged cartridge. | Verify phono input (MC) and gain settings. Check all tonearm wire connections. Inspect cartridge for visible damage. |
| 왜곡되거나 탁한 소리 | Incorrect tracking force; improper alignment (overhang, azimuth, VTA); worn or dirty stylus; damaged record. | Re-check tracking force. Verify cartridge alignment. Clean stylus. Inspect records for damage. |
| 윙윙거리는 소리 | Ground loop; improper grounding of turntable/tonearm; proximity to electrical interference; loose tonearm wire connections. | Ensure proper grounding. Move components away from power supplies or transformers. Check tonearm wire connections. |
| Skipping or mistracking | Insufficient tracking force; incorrect anti-skate; damaged record; dirty stylus; turntable not level. | Increase tracking force slightly (within recommended range). Adjust anti-skate. Clean stylus. Ensure turntable is perfectly level. |
9. 사양
Technical specifications for the Clearaudio Concept MC Moving Coil Phono Cartridge:
- 모델 이름: Concept MC
- 상표: 클리어오디오
- 카트리지 유형 : 무빙코일(MC)
- 본체 소재 : Aluminum-Magnesium Alloy with Ceramic Coating
- 첨필: Micro-line
- 외팔보: 붕소
- 권장 추적력: 2.0 - 2.2 grams (refer to specific product documentation for exact value)
- 출력 볼륨tage: Low output Moving Coil (specific value not provided in source data)
- 채널 분리: (Specific value not provided in source data)
- 주파수 응답: (Specific value not provided in source data)
- 내부 임피던스: (Specific value not provided in source data)
- 무게: 2 파운드 (Note: This is likely shipping weight. Actual cartridge weight is typically much lower, e.g., 8-10g.)
- 색상: 검은색
10. 보증 및 지원
Clearaudio products are manufactured to high standards and undergo strict quality control. This product is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.
For technical support, service, or warranty inquiries, please contact your authorized Clearaudio dealer or visit the official Clearaudio web연락처 정보 사이트.
Web대지: www.clearaudio.de