Schellenberg 20005 2-Gang Flush-Mounted Cover Frame

제품 끝view

The Schellenberg 20005 is a white, 2-gang flush-mounted cover frame designed for electrical installations. It serves as a replacement for worn or damaged frame systems, providing a clean and finished look for your switches or timer units.

주요 특징은 다음과 같습니다.

• Designed for replacing worn frame systems.
• Features a 2-gang configuration.
• 크기: 80 x 147 x 8 mm.
• 색상: 흰색.

안전 지침

Please read these safety instructions carefully before installation and use. Improper installation can lead to electrical shock or damage to the product and connected devices.

• Always disconnect power to the circuit at the main breaker before performing any electrical work.
• 설치 과정 중 확실하지 않은 부분이 있으면 자격을 갖춘 전기 기술자에게 문의하십시오.
• Do not use the cover frame if it is damaged.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• 본 제품은 실내에서만 사용하도록 설계되었습니다.

제품 내용

The package for the Schellenberg 20005 2-gang flush-mounted cover frame typically includes:

• 1 x Schellenberg 2-gang flush-mounted cover frame (Model 20005)

설정 및 설치

The Schellenberg 20005 cover frame is designed for screw-in installation, typically over existing flush-mounted electrical boxes and devices.

1. 준비: Ensure the power supply to the relevant circuit is turned off at the main breaker. Verify with a voltag전자 테스터.
2. Remove Old Frame (if applicable): Carefully remove the existing cover frame and any associated components.
3. 장치 설치: Mount your electrical device (e.g., switch, timer) into the flush-mounted box according to its specific instructions. Ensure it is securely fastened.
4. 커버 프레임 부착: Align the Schellenberg 20005 cover frame over the installed device and the flush-mounted box. The frame is designed to be screwed into place, typically using screws provided with the electrical device or the flush-mounted box itself. Ensure the frame sits flush against the wall.
5. 최종 확인: Once the frame is securely installed, restore power to the circuit. Test the functionality of the installed electrical device.

작업

The Schellenberg 20005 cover frame is a passive component designed to provide an aesthetic finish for electrical devices. It does not have any operational functions itself. The operation of the electrical device (e.g., switch, timer) installed within the frame is independent of the cover frame.

유지

To maintain the appearance of your Schellenberg 20005 cover frame:

• 부드러운 천으로 정기적으로 청소하세요.amp 옷감.
• Avoid using abrasive cleaners or solvents, as these can damage the surface finish.
• Ensure no liquids enter the electrical components during cleaning.

문제 해결

If you encounter issues with the Schellenberg 20005 cover frame, consider the following:

Frame Does Not Fit Device

The Schellenberg 20005 2-gang cover frame has internal openings measuring approximately 64x64mm per gang. It is important to verify the dimensions of your electrical device before purchase to ensure compatibility.

메모: This frame has been reported by some users as not being compatible with certain Schellenberg timer switches (e.g., models requiring 50x50mm openings) due to differing internal dimensions or the thickness of the device's mounting base. Always check the required frame opening size for your specific device.

명세서

보증 및 지원

For information regarding warranty, returns, or technical support, please refer to the official Schellenberg web사이트에서 확인하거나 고객 서비스에 직접 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.

You can visit the Schellenberg store for more products and information: Schellenberg Store