ECHO GT-225 2 Cycle 21.2cc Curved Shaft Gas Trimmer

중요한 안전 정보

Operating power equipment requires adherence to strict safety guidelines to prevent injury. Always read and understand the entire manual before operating the trimmer.

• 항상 눈 보호 장비와 튼튼한 신발을 착용하세요.
• 구경꾼을 안전한 거리에 두십시오.
• Do not operate on wet or slippery surfaces.
• Always turn off the trimmer and allow the engine to cool before refueling.
• Never carry the trimmer with the engine running.
• 안전한 작동을 위해 항상 제조업체의 지침을 따르십시오.

제품 끝view

The ECHO GT-225 is a 2-cycle, 21.2cc gas-powered string trimmer designed for efficient lawn and garden maintenance. It features a curved shaft for maneuverability and an easy-to-use design.

주요 특징

• 21.2cc professional-grade, 2-stroke engine for reliable power.
• 48-inch curved shaft with flex cable drive for comfortable operation.
• i-30 starting system designed to reduce starting effort by 30%.
• 14.9 fl oz capacity see-through fuel tank for easy fuel level monitoring.
• Equipped with a 2-line Rapid-Loader™ trimmer head for quick line changes.
• Lightweight design at approximately 10 pounds for reduced user fatigue.
• 16-inch cutting swath for efficient trimming.

그림 1: 전체 view of the ECHO GT-225 Curved Shaft Gas Trimmer.

Figure 2: Labeled diagram highlighting key features such as the engine, shaft, fuel tank, and trimmer head.

Figure 3: Close-up of the ergonomic handle and integrated controls, including the throttle and stop switch.

그림 4: View of the 21.2cc engine and the translucent fuel tank, allowing for easy fuel level checks.

Figure 5: Top-down perspective of the engine, showing the air filter cover and starter mechanism.

Figure 6: Close-up of the trimmer head with the protective guard, designed for user safety and debris deflection.

설정 및 조립

The ECHO GT-225 may require minor assembly before first use. Follow these steps to prepare your trimmer for operation:

1. 짐 풀기: 모든 구성품을 포장에서 조심스럽게 꺼내세요. 포장 목록에 있는 모든 부품이 있는지 확인하세요.
2. 핸들 어셈블리: Attach the auxiliary handle to the shaft at a comfortable operating position. Ensure it is securely tightened.
3. 경비원 설치: Mount the debris shield/guard over the trimmer head according to the instructions. This guard is crucial for operator safety.
4. 연료 준비: The GT-225 uses a 2-cycle engine. Mix fresh unleaded gasoline with a high-quality 2-cycle engine oil at the ratio specified in your engine manual (typically 50:1). Do not use E85 fuel.
5. 연료 공급: Fill the fuel tank with the prepared fuel mixture. Ensure the fuel cap is securely fastened.
6. 트리머 라인: Ensure the trimmer head is loaded with the appropriate pre-cut trimmer line. Refer to the maintenance section for detailed line replacement instructions.

작동 지침

Starting the Engine (Cold Start)

1. 트리머를 평평하고 안정적인 표면에 놓으십시오.
2. Move the choke lever to the 'COLD START' position.
3. 연료가 리턴 라인에서 보일 때까지 프라이머 펌프를 여러 번 누르십시오.
4. 시동줄을 엔진이 시동될 때까지 단단하고 부드럽게 당기십시오(보통 1~2회 당김).
5. Once the engine 'coughs' or attempts to start, move the choke lever to the 'RUN' position.
6. 엔진이 시동이 걸리고 원활하게 작동할 때까지 시동줄을 다시 당기십시오.
7. 엔진이 잠시 예열된 후 액셀 페달을 밟으십시오.

트리머 사용

• 균형 잡힌 자세를 유지하면서 양손으로 트리머를 단단히 잡으십시오.
• Keep the trimmer head parallel to the ground for an even cut.
• Maintain a safe distance from objects, people, and animals.
• Avoid hitting hard surfaces, rocks, or metal objects with the trimmer line, as this can cause line breakage and potential damage.
• To feed more line, gently tap the trimmer head on the ground while the engine is running at full throttle. The Rapid-Loader™ head will automatically advance the line.

엔진 정지

• 스로틀 트리거를 놓습니다.
• Press the engine stop switch to the 'OFF' position.

유지

Regular maintenance ensures optimal performance and extends the life of your ECHO GT-225 trimmer.

연료와 기름

• Always use fresh, properly mixed 2-cycle fuel. Stale fuel can cause starting issues and engine damage.
• 승인된 용기에 연료를 담아 서늘하고 건조한 곳에 보관하십시오.

Trimmer Line Replacement

The GT-225 uses a Rapid-Loader™ head designed for pre-cut line segments. This system simplifies line replacement compared to traditional spool winding.

1. 엔진이 꺼져 있고 식었는지 확인하세요.
2. Locate the two holes on the trimmer head where the line exits.
3. Pull out any remaining short pieces of trimmer line.
4. Insert new pre-cut line segments (typically 9-10 inches long) into the holes until they are securely seated.
5. Use high-quality trimmer line for best performance and durability.

청소

• After each use, clean debris from the trimmer head, guard, and engine cooling fins.
• Periodically clean or replace the air filter to ensure proper engine breathing.

저장

• 장기간 보관할 경우, 연료 탱크를 비우고 엔진이 멈출 때까지 작동시켜 기화기를 청소하십시오.
• Store the trimmer in a clean, dry place, away from direct sunlight and extreme temperatures.

문제 해결

This section provides solutions to common operational issues. For problems not listed here, consult an authorized service center.

기술 사양

보증 및 지원

For specific warranty details, please refer to the warranty card included with your product or visit the official ECHO web사이트. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.

If you require technical assistance, replacement parts, or service, please contact ECHO customer support or an authorized ECHO service dealer. Contact information can typically be found on the ECHO web사이트나 제품 설명서에서 확인하세요.