Satco S1825

Satco S1825 Mogul Base Light Bulb

사용 설명서

소개

This manual provides essential instructions for the safe and effective use of your Satco S1825 Mogul Base Light Bulb. Please read thoroughly before installation and operation to ensure proper functionality and safety. This bulb is designed for fixtures requiring an E39 Mogul base and offering 3-way dimming capability.

안전 정보

  • 감전 위험: Always turn off power to the fixture at the circuit breaker or fuse box before installing, removing, or cleaning the bulb.
  • 화상 위험: Light bulbs generate heat. Allow the bulb to cool completely before handling. Do not touch the bulb when it is operating or immediately after turning it off.
  • 적절한 와트tage: 최대 와트를 초과하지 마십시오tage rating of your fixture. This bulb operates at 50W, 100W, or 150W.
  • 기본 호환성: Use only in fixtures designed for an E39 Mogul base. Incorrect base types can cause electrical hazards or damage.
  • 실내에서만 사용 가능: This bulb is intended for indoor, dry location use unless otherwise specified by the fixture.
  • 처분: 사용한 전구는 해당 지역 규정에 따라 폐기하세요.

설정 및 설치

  1. 전원이 꺼져 있는지 확인하세요. Before beginning, ensure the power supply to the light fixture is completely turned off at the wall switch and the main circuit breaker.
  2. 오래된 전구를 제거합니다(해당되는 경우): If replacing an existing bulb, allow it to cool down completely before carefully unscrewing it counter-clockwise from the socket.
  3. 고정물 검사: Check the light fixture socket for any damage or debris. Ensure it is clean and dry.
  4. 새 전구 설치: Carefully screw the Satco S1825 bulb clockwise into the E39 Mogul base socket until it is snug. Do not overtighten.
  5. 복원력 : 전구를 제대로 설치했으면 회로 차단기에서 조명 기구의 전원을 다시 켜십시오.
Satco S1825 Mogul Base Light Bulb
Image 1: The Satco S1825 Mogul Base Light Bulb. This image shows the frosted glass bulb with its large E39 Mogul screw base, ready for installation into a compatible fixture.

작동 지침

The Satco S1825 is a 3-way incandescent light bulb, designed to provide three levels of brightness when used with a compatible 3-way lamp or fixture switch. Each click of the switch will cycle through the brightness settings:

  • 첫 번째 클릭 : Activates the lowest brightness setting (50 Watts, 550 Lumens).
  • 두 번째 클릭: Activates the medium brightness setting (100 Watts, 1300 Lumens).
  • 세 번째 클릭: Activates the highest brightness setting (150 Watts, 1850 Lumens).
  • 네 번째 클릭: 전구를 끕니다.

당신의 l을 확인amp or fixture has a 3-way switch for this functionality. If used in a standard on/off socket, the bulb will operate at its highest wattage (150W) or may not function correctly, depending on the fixture's design.

유지

This light bulb requires minimal maintenance. Follow these guidelines to ensure its longevity and performance:

  • 청소: Always turn off the power and allow the bulb to cool completely before cleaning. Use a soft, dry cloth to gently wipe the bulb. Do not use liquid cleaners or abrasive materials, as these can damage the bulb's finish or electrical components.
  • 대사: When the bulb reaches the end of its life, turn off the power, allow it to cool, and replace it following the installation steps outlined in the 'Setup and Installation' section.

문제 해결

Satco S1825 전구가 예상대로 작동하지 않는 경우 다음 사항을 고려하십시오.

  • 전구가 켜지지 않습니다:
    • 전원 스위치가 'ON' 위치에 있는지 확인하세요.
    • 회로 차단기가 작동하지 않았는지 확인하세요.
    • Ensure the bulb is screwed in tightly into the socket. A loose connection can prevent it from lighting.
    • Confirm the fixture is receiving power by testing with another known working bulb.
    • The bulb may have reached the end of its operational life and needs replacement.
  • 전구 깜박임:
    • Ensure the bulb is screwed in securely. A loose connection is a common cause of flickering.
    • 조명기구 소켓에 손상이나 부식이 있는지 확인하십시오.
    • If using a 3-way switch, ensure it is functioning correctly. A faulty switch can cause inconsistent power delivery.
  • Only One Brightness Setting Works (for 3-way bulbs):
    • Confirm that the fixture or lamp is equipped with a 3-way switch. Standard on/off switches will not utilize the 3-way functionality.
    • The 3-way switch itself might be faulty and require replacement.

명세서

상표샛코
모델 번호S1825
라이트 타입백열전구
왓tage50/100/150 Watts (3-Way)
권tage120 볼트
명도550/1300/1850 루멘
전구 모양 크기PS25
전구베이스E39 모굴 기지
색온도2700 켈빈(웜화이트)
마치다희게 센
평균 정격 수명2000시간 (하루 3시간씩 근무 시 약 1.8년)
연간 예상 에너지 비용$6.02 / $12.05 / $18.07 (based on 3 hrs/day, 11¢/kWh)
Satco S1825 전구에 대한 조명 정보
Image 2: Lighting Facts label for the Satco S1825 bulb. This label details brightness levels (550/1300/1850 lumens), estimated yearly energy cost ($6.02/$12.05/$18.07 based on 3 hrs/day, 11¢/kWh), average life (1.8 years based on 3 hrs/day), light appearance (Warm, 2700K), and energy used (50/100/150 watts).

보증 정보

Satco products are manufactured to high-quality standards. This product is covered by the manufacturer's standard warranty against defects in materials and workmanship. Please refer to the packaging or Satco's official website for specific warranty terms and conditions, as these may vary. Keep your purchase receipt as proof of purchase for any warranty claims.

고객 지원

For further assistance, technical support, or inquiries regarding your Satco S1825 Mogul Base Light Bulb, please contact Satco customer service directly. Contact information can typically be found on the product packaging or on the official Satco web대지.

Web대지: www.satco.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.