Amisco Rocky Kids Twin Platform Bed - Assembly and Care Manual

1. 중요한 안전 정보

Please read all instructions carefully before assembling and using your Amisco Rocky Kids Twin Platform Bed. Keep this manual for future reference.

• 조립하기 전에 모든 부품이 있고 손상이 없는지 확인하세요. 부품이 없거나 파손된 경우 사용하지 마세요.
• 긁힘을 방지하기 위해 부드럽고 깨끗한 표면에서 침대를 조립하십시오.
• Always use two or more people for assembly to prevent injury.
• 모든 잠금장치를 단단히 조이되, 너무 세게 조이지 마십시오. 주기적으로 잠금장치를 점검하고 필요에 따라 다시 조여주십시오.
• Do not allow children to play on or around the bed during assembly.
• This bed is designed for use with a twin-size mattress.

2. 패키지 내용

Verify that all components listed below are included in your package. If any parts are missing, please contact Amisco customer support.

• 헤드보드(1)
• 풋보드(1)
• 사이드 레일(2)
• Bed Slats (Set)
• Hardware Pack (Bolts, Washers, Nuts, Allen Key)

3. 조립 설명서

Follow these steps carefully to assemble your Amisco Rocky Kids Twin Platform Bed. It is recommended to have two people for assembly.

3.1단계: 측면 레일을 헤드보드와 풋보드에 부착합니다.

1. 모든 구성품을 풀어 깨끗하고 부드러운 표면에 펼쳐 놓으세요.
2. Identify the headboard and footboard. Note the attachment points for the side rails.
3. Align one side rail with the corresponding attachment points on the headboard and footboard.
4. Secure the side rail using the provided bolts, washers, and nuts. Hand-tighten initially.
5. Repeat for the second side rail.
6. Once both side rails are in place, use the Allen key to fully tighten all bolts. Do not overtighten.

Step 3.2: Install Bed Slats and Adjust Height

The Amisco Rocky bed features a variable position bed frame, allowing you to adjust the mattress height to 7'', 9.5'', or 14'' from the floor. This is ideal for platform bed arrangements or to increase under-bed storage.

1. Locate the bed slat supports on the inside of the side rails. These supports will have multiple pre-drilled holes for height adjustment.
2. Decide on your desired bed height:
   • 7인치: Lowest position, suitable for a mattress only.
   • 9.5인치: Mid-level position.
   • 14인치: Highest position, maximizing under-bed storage.
3. Insert the bed slats into the chosen height position on the side rail supports. Ensure they are evenly spaced and securely seated.
4. If your slats require fastening, use the provided hardware to secure them to the side rails.

Figure 1: Fully assembled Amisco Rocky Kids Twin Platform Bed. This image displays the sturdy metal construction and classic design, illustrating the platform base ready for a mattress.

4. 작동 지침 (높이 조절)

The Amisco Rocky bed allows for easy adjustment of the mattress support height. To change the height:

1. Remove the mattress and any bedding from the bed frame.
2. Carefully lift and remove the bed slats from their current position.
3. Re-insert the bed slats into the desired height setting (7'', 9.5'', or 14'') on the side rail supports. Ensure all slats are securely seated and evenly distributed.
4. Replace the mattress and bedding.

주의: Always remove the mattress before adjusting slat height. Ensure slats are fully secured in their new position before placing the mattress back on the frame.

5. 유지관리 및 관리

To ensure the longevity and appearance of your Amisco Rocky Kids Twin Platform Bed, follow these care guidelines:

• 청소: 금속 프레임을 부드러운 천으로 닦으세요.amp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the baked powder coating.
• 마무리 보호: The bed features a nontoxic, environmentally safe baked powder coating designed for scratch resistance. While durable, avoid sharp objects that could scratch the finish.
• 패스너 점검: Periodically (every 3-6 months) check all bolts and fasteners to ensure they are tight. Retighten if necessary to maintain stability.
• 움직임: When moving the bed, lift it rather than dragging it to prevent stress on the frame and potential floor damage.

6. 문제 해결

If you encounter any issues with your Amisco Rocky Kids Twin Platform Bed, refer to the following common solutions:

• 침대가 흔들거리는 것 같아요: Check all bolts and fasteners. Ensure they are securely tightened. If the bed was recently moved, re-check all connections.
• 삐걱거리는 소리: Squeaking can often be resolved by tightening all frame bolts. If the issue persists, ensure the bed slats are properly seated and not rubbing against the frame. Applying a small amount of lubricant (e.g., silicone spray) to contact points between slats and frame can sometimes help, but ensure it is safe for the finish.
• 높이 조절이 어렵습니다. Ensure the mattress and bedding are removed before attempting to adjust slat height. Verify that the slats are not jammed and are being inserted into the correct pre-drilled holes.
• 잃어버린 부분들: If you discover missing parts during assembly, do not proceed. Contact Amisco customer support immediately for assistance.

7. 사양

8. 보증 정보

Amisco products are manufactured with high-quality materials and craftsmanship. Specific warranty details, including coverage period and terms, are typically provided with your product at the time of purchase or can be found on the official Amisco web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

자세한 보증 정보는 다음을 방문하십시오. Amisco Official Store 또는 고객 서비스에 직접 문의하세요.

9. 고객 지원

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Amisco customer support.

You can often find contact information on the Amisco web해당 사이트를 통해서나 제품을 구매한 소매업체를 통해서도 구매가 가능합니다.

자세한 내용은 다음을 방문하세요. Amisco Official Store on Amazon.