VOLTCRAFT PPS-11360 Adjustable Laboratory Power Supply User Manual

1. 제품 오버view

The VOLTCRAFT PPS-11360 is a versatile and programmable laboratory power supply designed for various electronic applications. It provides a stable and adjustable DC output, making it suitable for development, testing, and educational purposes. Key features include a wide voltage and current range, USB connectivity for remote control, and multiple output channels.

이미지 1.1: 앞면 view of the VOLTCRAFT PPS-11360 Adjustable Laboratory Power Supply, showing the display and control knobs.

주요 특징:

• 조정 가능한 출력 볼륨tag예: 1V/DC ~ 36V/DC
• 조절 가능한 출력 전류: 0A ~ 5A
• 총 출력: 180W
• 출력 수 : 2
• USB Programmable for remote control
• 견고한 금속 casing

2. 안전 지침

Please read these safety instructions carefully before operating the device to prevent injury or damage. Keep this manual for future reference.

• 전기 안전: Always connect the power supply to a grounded outlet. Do not operate the device with wet hands or in damp environments. Ensure the power cord is undamaged.
• 통풍: Ensure adequate ventilation around the unit. Do not block the ventilation openings. Overheating can lead to device malfunction or damage.
• 운영 환경: Use the device in a clean, dry environment, away from direct sunlight, extreme temperatures, and corrosive gases.
• 서비스: 기기를 직접 열거나 수리하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
• 출력 연결 : Ensure correct polarity when connecting loads to the output terminals. Avoid short circuits.

3. 설정

3.1 풀기 및 검사

Carefully remove the power supply from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. If any damage is found, contact your supplier immediately.

3.2 패키지 내용

• 볼트크래프트 PPS-11360 실험실 전원 공급 장치
• AC 전원 코드
• 사용자 설명서

3.3 전원 연결

1. 전면 패널의 전원 스위치가 OFF 위치에 있는지 확인하십시오.
2. 제공된 AC 전원 코드를 전원 공급 장치 후면 패널의 전원 입력 소켓에 연결하십시오.
3. Plug the other end of the AC power cord into a suitable grounded electrical outlet (100-240V AC, 50/60Hz).

Image 3.1: Rear panel of the VOLTCRAFT PPS-11360, showing the power input, fan, USB port, and remote control connector.

3.4 부하 연결

1. Ensure the power supply is turned OFF before connecting any load.
2. Connect the positive (+) terminal of your load to the red output terminal (MAIN OUTPUT +) on the front panel.
3. Connect the negative (-) terminal of your load to the black output terminal (MAIN OUTPUT -) on the front panel.
4. For remote control, connect the USB cable to the USB port on the rear panel and to your computer. Install necessary drivers and software as per the manufacturer's web대지.

4. 사용 설명서

4.1 전원 켜기/끄기

To power on the device, flip the power switch on the front panel to the ON position. The display will illuminate. To power off, flip the switch to the OFF position.

4.2 볼륨 조정tage와 현재

1. 볼륨을 켜다tage adjustment knob to set the desired output voltage. The display will show the set voltage.
2. Turn the current adjustment knob to set the desired output current limit. The display will show the set current limit.
3. Connect your load. The display will show the actual output voltag부하에 전달되는 전기와 전류.

4.3 Using Preset Modes (P1, P2, P3)

The device features preset memory functions (P1, P2, P3) to store and recall frequently used voltage and current settings. Use the "MODE" switch to select between Normal, Preset, and Remote Control modes. In Preset mode, use the "RECALL" button to cycle through and select P1, P2, or P3.

4.4 Remote Control Operation (USB)

For remote control via USB, ensure the USB cable is connected to both the power supply and your computer. Set the "MODE" switch to "Remote Ctrl". Use the provided software (available from VOLTCRAFT website) to control voltage, current, and other parameters from your computer. Refer to the software manual for detailed instructions.

5. 유지관리

5.1 청소

To clean the exterior of the power supply, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the casing and display. Ensure the device is powered off and unplugged before cleaning.

5.2 환기

Regularly check that the ventilation openings on the rear panel are free from dust and obstructions. A clogged fan or vents can lead to overheating and reduced performance. Use compressed air to gently clear any dust buildup.

5.3 퓨즈 교체

If the power supply does not turn on, check the fuse located near the AC input on the rear panel. To replace the fuse:

1. Disconnect the power cord from the wall outlet and the power supply.
2. Use a small flat-head screwdriver to open the fuse holder.
3. Remove the old fuse and replace it with a new fuse of the same type and rating (T6AL 250V).
4. 퓨즈 홀더를 단단히 닫으십시오.

경고: Always use a fuse with the specified rating to prevent damage to the unit or fire hazard.

6. 문제 해결

7. 사양

8. 보증 및 지원

VOLTCRAFT products are designed for reliability and precision. This product comes with a standard warranty period. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official VOLTCRAFT web대지.

For technical support, troubleshooting assistance, or spare parts availability, please contact VOLTCRAFT customer service. You can find contact information on the VOLTCRAFT web사이트나 제품 설명서에서 확인하세요.

예비 부품의 가용성: 1년 (제품 사양에 따름).

Image 8.1: VOLTCRAFT brand logo.