KNIPEX 97 71 180 전선 페룰용 압착 플라이어 사용 설명서

1. 서론

This manual provides essential instructions for the safe and effective use, maintenance, and care of your KNIPEX 97 71 180 Crimping Pliers for Wire Ferrules. Please read this manual thoroughly before operating the tool and retain it for future reference.

2. 안전 정보

Always observe the following safety precautions when using the crimping pliers:

• 눈 보호: Always wear appropriate eye protection to prevent injury from flying debris.
• 검사 도구: Before each use, inspect the pliers for any damage, wear, or loose parts. Do not use damaged tools.
• 적절한 적용: Use the pliers only for their intended purpose: crimping wire ferrules. Do not use them as a hammer, pry bar, or for cutting hardened materials.
• 안전한 작업물: Ensure the wire and ferrule are properly positioned and stable before crimping.
• 손을 깨끗이 유지하십시오: Keep fingers and other body parts away from the crimping jaws during operation.
• 저장: 도구는 어린이의 손이 닿지 않는 건조하고 안전한 곳에 보관하세요.

3. 제품 오버view

The KNIPEX 97 71 180 Crimping Pliers are designed for reliable crimping of wire ferrules. Key features include:

• Precision crimping profiles for various ferrule sizes.
• Ergonomic handles for comfortable operation.
• Durable construction for long service life.

그림 1: 이상view of the KNIPEX 97 71 180 Crimping Pliers. The image displays the pliers with red handles and polished steel jaws, showing the various crimping profiles and the KNIPEX branding.

4. 설정

The KNIPEX 97 71 180 Crimping Pliers are ready for use out of the packaging. No assembly is required. Before first use, ensure the tool is clean and free from any packaging materials.

5. 사용 설명서

Follow these steps for proper crimping of wire ferrules:

1. 전선 준비: Strip the insulation from the end of the wire to the appropriate length for the ferrule being used. The stripped length should match the metal tube length of the ferrule.
2. Insert Wire into Ferrule: Insert the stripped end of the wire completely into the ferrule. Ensure all wire strands are contained within the ferrule's metal tube.
3. Select Crimping Profile: Identify the correct crimping profile on the pliers that matches the size of your wire ferrule. The pliers feature multiple profiles for different ferrule sizes (e.g., 1.5, 2.5, 4, 6, 10, 16 mm²).
4. Position Ferrule: Place the ferrule, with the wire inserted, into the selected crimping profile of the pliers. Ensure the ferrule is seated firmly and squarely within the jaws.

Figure 2: The image shows a wire ferrule with a green and yellow wire inserted into the crimping jaws of the pliers, ready for crimping. The ferrule is positioned in the appropriate size slot.
5. Perform Crimping: Squeeze the handles of the pliers firmly and completely until the crimping action is finished. The pliers are designed to apply the correct pressure for a secure crimp.


Figure 3: This image depicts the pliers in the process of crimping a wire ferrule. The jaws are partially closed, compressing the ferrule around the wire strands.

6. Inspect Crimped Connection: After crimping, release the handles and remove the ferrule. Visually inspect the crimp for proper formation. The ferrule should be securely fastened to the wire, and the wire strands should not be visible or loose. A gentle tug test can confirm the connection's integrity.


Figure 4: The image shows a fully crimped wire ferrule, securely attached to the wire, demonstrating a successful crimp. The pliers are open, revealing the crimped ferrule.

6. 유지관리

• 청소: After each use, wipe the pliers clean with a dry cloth to remove any dirt, dust, or debris. For stubborn grime, a slightly damp 천을 사용한 후 완전히 말리세요.
• 매끄럽게 하기: Periodically apply a small amount of light machine oil to the pivot points to ensure smooth operation and prevent rust.
• 저장: 부식을 방지하기 위해 펜치를 건조한 곳에 보관하십시오. 부식성 화학 물질로부터 멀리하십시오.

7. 문제 해결

작동 중 문제가 발생하면 다음 사항을 고려하세요.

• 압착 품질 불량:
  • Ensure the correct crimping profile is selected for the ferrule size.
  • Verify the wire is fully inserted into the ferrule and all strands are captured.
  • Apply sufficient pressure by fully closing the pliers handles.
• Difficulty Squeezing Handles:
  • Check if the correct ferrule size is used for the selected crimping profile. Using an oversized ferrule can make crimping difficult.
  • Lubricate the pivot points if the pliers feel stiff.

8. 사양

9. 보증 및 지원

For information regarding warranty coverage, product support, or service, please refer to the official KNIPEX website or contact KNIPEX customer service directly. Contact details can typically be found on the manufacturer's packaging or web대지.

제조업체: KNIPEX Tools LP

Web대지: www.knipex.com