KNIPEX Tools - Crimping Pliers

일반 안전 지침

Read and understand all instructions before using the KNIPEX Crimping Pliers. Failure to follow these instructions may result in injury or damage to the tool or workpiece.

• 항상 다음을 포함한 적절한 개인 보호 장비를 착용하십시오. 눈 보호, when using hand tools.
• Ensure the tool is in good working condition before each use. Do not use damaged tools.
• Use the correct tool for the job. These pliers are designed for crimping electrical connectors; do not use them for cutting, prying, or striking.
• 작동 중에는 크림핑 턱에서 손과 손가락을 깨끗이 치워 두십시오.
• Do not use on live electrical circuits unless the tool is specifically rated and insulated for such use. This model is not insulated for live work.
• 도구는 어린이의 손이 닿지 않는 건조하고 안전한 곳에 보관하세요.

제품 끝view

The KNIPEX Crimping Pliers model 97 00 215 A are precision-engineered hand tools designed for reliable and consistent crimping of electrical connectors. They are built for durability and comfortable use, meeting the demands of professional tradesmen.

Image showing the KNIPEX Crimping Pliers model 9700215A, a hand tool designed for crimping electrical connectors. The pliers feature ergonomic handles and a robust head for efficient operation.

주요 특징은 다음과 같습니다.

• Precision grade performance for consistent crimps.
• Comfortable, ergonomic grip for extended use.
• Durable construction, tested for real-world conditions.

설정

The KNIPEX Crimping Pliers are ready for use out of the packaging. No assembly is required.

1. Unpack the crimping pliers from their packaging.
2. Inspect the tool for any signs of damage or manufacturing defects. Do not use if damaged.
3. Familiarize yourself with the crimping jaws and the handle mechanism.
4. 작업 공간이 깨끗하고, 조명이 밝으며, 방해물이 없는지 확인하세요.

작동 지침

올바른 압착을 위해 다음 단계를 따르십시오.

1. 올바른 터미널을 선택하세요: Choose the appropriate electrical terminal or connector for your wire gauge and application. Ensure it is compatible with the crimping pliers.
2. 전선 준비: Strip the insulation from the end of the wire to the correct length, exposing the conductor. Avoid damaging the wire strands.
3. 터미널 삽입: Place the terminal into the appropriate crimping die on the pliers. The crimping die should match the size and type of the terminal.
4. 와이어 삽입: Insert the stripped wire into the terminal, ensuring all strands are within the crimp barrel.
5. 주름: Squeeze the handles of the pliers firmly and completely until the crimping cycle is finished. The pliers should release automatically or require a full squeeze to complete the crimp.
6. 크림프를 검사하세요: After crimping, visually inspect the connection. It should be tight and secure, with no loose strands. Gently tug on the wire to ensure it is properly seated and cannot be pulled out.

메모: Always refer to the terminal manufacturer's specifications for recommended crimping procedures and die selection.

유지

Proper maintenance will extend the life and performance of your KNIPEX Crimping Pliers.

• 청소: After each use, wipe the pliers clean with a dry cloth to remove any dirt, dust, or debris. For stubborn grime, a mild solvent can be used, ensuring it does not damage the handle material.
• 매끄럽게 하기: Periodically apply a small amount of light machine oil to the pivot points and moving parts to ensure smooth operation. Wipe off any excess oil.
• 저장: Store the pliers in a dry environment to prevent rust. Keep them away from corrosive materials and extreme temperatures.
• 점검: Regularly inspect the crimping jaws for wear, damage, or misalignment. Check the handles for cracks or looseness. Replace the tool if significant wear or damage is observed.

문제 해결

If you encounter issues while using your crimping pliers, consider the following:

• 압착 품질 불량:
  • Ensure you are using the correct crimping die for the terminal size.
  • 전선의 피복이 올바른 길이로 벗겨져 있고 단자에 완전히 삽입되었는지 확인하십시오.
  • Apply sufficient force to fully close the pliers during the crimping cycle.
• Difficulty Closing Pliers:
  • Check for any obstructions in the jaws or pivot points.
  • Apply lubrication to the pivot points if they feel stiff.
  • Ensure you are not attempting to crimp material beyond the tool's capacity.
• Wire Pulls Out of Crimp:
  • The crimp was not fully completed or the wrong die was used.
  • The wire may not have been fully inserted into the terminal.
  • The terminal itself may be faulty or incompatible.

If problems persist, contact KNIPEX customer support or a qualified technician.

명세서

보증 및 지원

KNIPEX tools are manufactured to high-quality standards and are designed for durability. For specific warranty information, please refer to the warranty documentation included with your purchase or visit the official KNIPEX web대지.

For technical support, spare parts, or service inquiries, please contact KNIPEX customer service through their official channels. Provide your product model number (97 00 215 A) and any relevant purchase information when seeking assistance.

You can find more information and contact details on the official KNIPEX web대지: www.knipex.com