Osmo 4006 Wood Protector Clear Treatment User Manual

1. 제품 오버view

The Osmo 4006 Wood Protector Clear Treatment is a unique, biocide-free wood wax primer designed for effective wood protection. Based on natural oils and waxes, this product is safe for both interior and exterior use, offering extreme water repellency. It is particularly effective in protecting wood from blue stain and mold, especially in environments with high humidity and temperature.

This microporous, natural oil/wax-based impregnation provides high coverage, with the 2.5-liter container covering approximately 20 m², depending on the wood type and application method.

Image 1: Osmo 4006 Wood Protector Clear Treatment in a can. The label indicates it is a biocide-free wax impregnation for interior and exterior use, microporous, natural oil/wax based, and extremely water-repellent. It also highlights "Highest coverage! Content covers approx. 20 m²." and "4006 Clear".

2. 안전 정보

• This product is formulated without biocides or preservatives, making it safe for humans, animals, and plants once dry.
• It is suitable for children's toys, complying with EN 71.3 standards.
• Ensure adequate ventilation during application and drying.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• 피부와 눈에 닿지 않도록 하십시오. 눈에 들어간 경우 즉시 흐르는 물에 충분히 헹구십시오.
• 삼키지 마십시오. 삼켰을 경우 즉시 의사의 진료를 받고 이 용기 또는 라벨을 보여주십시오.
• Dispose of product residues and empty containers according to local regulations.

3. 준비

1. 표면 상태: The wood surface must be clean, dry, and frost-free. Ensure the wood has a moisture content of no more than 20%.
2. 청소: Remove any dirt, dust, grease, or old paint/varnish. Sand the surface if necessary to achieve a smooth finish.
3. Existing Coatings: If the wood has an existing coating, ensure it is fully removed or compatible with oil/wax treatments.
4. 활발한: Stir the Osmo Wood Protector thoroughly before use.

4. 신청 안내

Osmo Wood Protector has a thin consistency, allowing for various application methods. For optimal protection, apply to all sides of the wood if possible.

1. 방법: Apply thinly and evenly using a brush, roller, or by dipping the wood.
2. 적용 범위: The product offers high coverage. Apply sparingly; "if in doubt, use less."
3. 건조 시간: Allow the product to penetrate and dry. Specific drying times may vary based on temperature, humidity, and wood type.
4. Finishing Coat: A finishing coat is required within 7-10 days of applying the Wood Protector. This product acts as a primer and requires a topcoat for full protection and durability.
5. 대청소: Clean tools immediately after use with Osmo Brush Cleaner or a suitable solvent.

5. 유지관리

Once the Osmo Wood Protector has been applied and a suitable finishing coat has cured, regular maintenance will help preserve the wood's appearance and protection.

• 청소: 처리된 표면을 다음 방법으로 청소하세요.amp cloth. For stubborn dirt, use Osmo Wash and Care or a mild wood cleaner.
• Re-treatment: The frequency of re-treatment depends on wear and exposure. Reapply the finishing coat as needed when signs of wear become visible.
• 강한 세척제는 피하세요: Do not use abrasive cleaners or strong chemical detergents, as these can damage the protective finish.

6. 보관

• Store in a cool, dry, and frost-free place.
• 사용하지 않을 때는 용기를 단단히 닫아 두십시오.
• The product has a long shelf life if stored correctly.

7. 문제 해결

• 강한 냄새: Some users report a strong odor that lingers for several weeks after application. Ensure good ventilation during and after application. The odor will dissipate over time.
• Excess Oil: Applying too much product can lead to a sticky or uneven finish. Always apply thinly. If excess oil dries, it may require sanding and reapplication.
• 고르지 못한 마감: Ensure the wood surface is clean and evenly prepared. Apply the product uniformly.

8. 사양

9. 보증 및 지원

For specific warranty information or technical support regarding your Osmo 4006 Wood Protector, please refer to the official Osmo website or contact Osmo customer service directly. Contact details are typically available on the product packaging or the manufacturer's official channels.