Campagnolo Veloce 10 Speed Cassette Instruction Manual

1. 제품 오버view

씨ampagnolo Veloce 10 Speed Cassette is engineered for optimal chain and sprocket interaction, ensuring precise and rapid shifting performance. This cassette features Ultra-Drive tooth profiling for enhanced synchronization, action, and rapid gear changes. Constructed from steel with a galvanized finish, it is designed for durability and consistent performance within a 10-speed Campagnolo drivetrain system.

이미지 1.1: 상단 view C의ampagnolo Veloce 10 Speed Cassette, showing the individual sprockets and lockring area.

주요 특징:

• 재료: 내구성을 위해 강철 구조로 제작되었습니다.
• 기술: Ultra-Drive tooth profiling for optimized chain engagement.
• 설계: Single sprockets for precise manufacturing.
• 마치다: Galvanized for corrosion resistance.
• 포함 사항: Supplied with a lockring for secure installation.
• 무게: 약 258그램.

2. 설정 및 설치

Proper installation is crucial for the performance and longevity of your Campagnolo Veloce 10 Speed Cassette. Ensure you have the necessary tools, including a cassette lockring tool and a chain whip.

설치 단계:

1. 호환성 검사 : Verify that your freehub body is compatible with Campagnolo 10-speed cassettes.
2. Clean Freehub: Thoroughly clean the freehub body to remove any dirt, grease, or old cassette residue.
3. Sprocket Placement: Carefully slide the individual sprockets onto the freehub body. Ensure each sprocket is correctly oriented and aligned with the splines. The smallest sprocket typically has a specific orientation.
4. Secure Lockring: Once all sprockets are in place, thread the provided lockring onto the freehub body. Use a cassette lockring tool to tighten the lockring. Refer to your wheel manufacturer's specifications for the correct torque value, typically around 40 Nm.
5. 최종 확인: Ensure the cassette is firmly seated and there is no play between the sprockets.

이미지 2.1: 각도 view C의ampagnolo Veloce 10 Speed Cassette, highlighting the sprocket teeth and lockring.

3. 사용 설명서

씨ampagnolo Veloce 10 Speed Cassette is designed to work seamlessly with compatible 10-speed Campagnolo chains and derailleurs. Proper shifting technique will maximize performance and component life.

Shifting Best Practices:

• 변화를 예측하세요: Shift gears proactively, especially before inclines or changes in terrain, to maintain momentum and reduce stress on the drivetrain.
• Reduce Pedal Pressure: Briefly ease off the pedals during a shift to allow the chain to move smoothly between sprockets. Avoid shifting under heavy load.
• 부드러운 전환: Use the full range of your shifters to ensure complete and decisive gear changes.
• Cross-Chaining: Minimize extreme chain angles (e.g., large chainring to largest cassette sprocket, or small chainring to smallest cassette sprocket) to reduce wear and noise.

4. 유지관리

Regular maintenance extends the life of your cassette and ensures optimal shifting performance.

유지 관리 일정:

• 정기 청소: After every few rides or when visibly dirty, clean the cassette. Use a bicycle-specific degreaser and a stiff brush to remove grime from between the sprockets. Rinse thoroughly with water and dry completely.
• 체인 검사: Periodically check your chain for wear using a chain wear indicator tool. A worn chain will accelerate cassette wear. Replace the chain before it reaches 0.75% elongation.
• 스프로킷 점검: Inspect the sprocket teeth for signs of wear, such as a 'shark fin' profile (where teeth become pointed and hooked). Worn sprockets can cause poor shifting and chain skipping.
• Lockring Check: Occasionally check that the cassette lockring remains securely tightened to the specified torque.

5. 문제 해결

This section addresses common issues you might encounter with your cassette.

일반적인 문제 및 해결책:

• 변속 성능 저하:
  • 원인: Incorrect derailleur adjustment, worn chain, dirty cassette, or incorrect cable tension.
  • 해결책: Adjust rear derailleur limits and B-tension screw. Check and adjust shifter cable tension. Clean the cassette and chain. Replace worn chain.
• 체인 건너뛰기 또는 점프:
  • 원인: Severely worn chain or cassette sprockets, loose cassette lockring, or bent derailleur hanger.
  • 해결책: Inspect chain and cassette for wear and replace if necessary. Ensure lockring is tightened to specification. Check and straighten or replace bent derailleur hanger.
• 구동계에서 과도한 소음 발생:
  • 원인: Dry or dirty chain, misaligned derailleur, or loose cassette.
  • 해결책: Clean and lubricate the chain. Check derailleur alignment and adjustment. Ensure cassette lockring is tight.

6. 사양

Image 6.1: Illustrative image showing approximate dimensions of the cassette.

7. 보증 정보

이 Campagnolo Veloce 10 Speed Cassette is covered by a limited warranty. The specific terms and conditions of this warranty may vary by region and purchase location.

For detailed information regarding the warranty period, coverage, and claim procedures, please refer to the official Campagnolo warranty documentation provided with your product or visit the official Camp아놀로 web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

8. 지원

Should you require technical assistance, have questions about installation, maintenance, or need to inquire about spare parts, please contact Campagnolo customer support.

연락처 정보:

• 공식적인 Web대지: Visit the official Camp아놀로 web지원 자료, 자주 묻는 질문(FAQ) 및 연락처 정보를 제공하는 사이트입니다.
• 공인 서비스 센터: Locate an authorized Campagnolo service center near you for professional assistance.